SANS 19762-1-2009 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 1 General terms relating to AIDC《信息技术 自动识别和数据获取(.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22567-4 SANS 19762-1:2009Edition 1 ISO/IEC 19762-1:2008Edition 2SOUTH AFRICAN NATIONAL STANDARD Information technology Automatic identific

4、ation and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC This national standard is the identical implementation of ISO/IEC 19762-1:2008, and is adopted with the permission of the International Organization for Standardization and the International Electro

5、technical Commission. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 19762-1:2009 Edition 1 ISO/IEC 19762-1:2008 Edition 2 Table of changes Change No. Date Scope National foreword This

6、 South African standard was approved by National Committee SABS SC 71K, Information technology Automatic identification and data capture techniques, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in

7、June 2009. Reference numberISO/IEC 19762-1:2008(E)ISO/IEC 2008INTERNATIONAL STANDARD ISO/IEC19762-1Second edition2008-06-15Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC Technologies de linformation Tech

8、niques automatiques didentification et de saisie de donnes (AIDC) Vocabulaire harmonis Partie 1: Termes gnraux relatifs lAIDC SANS 19762-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) PDF disclaimer This PDF fil

9、e may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the

10、responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-cr

11、eation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/

12、IEC 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in t

13、he country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2008 All rights reservedSANS 19762-1:2009This s tandard may only be used and printed by approve

14、d subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) ISO/IEC 2008 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Classification of entries . 1 3 Terms and definitions. 1 4 Abbreviations 26 Bibliography . 28 Index 29 SANS 19762-1:2009This s tandar

15、d may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) iv ISO/IEC 2008 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized syste

16、m for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees col

17、laborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standar

18、ds are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication

19、as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such paten

20、t rights. ISO/IEC 19762-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. This second edition cancels and replaces the first edition (ISO/IEC 19762-1:2005), which has been technically revised.

21、ISO/IEC 19762 consists of the following parts, under the general title Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary: Part 1: General terms relating to AIDC Part 2: Optically readable media (ORM) Part 3: Radio frequency identification (RFID)

22、 Part 4: General terms relating to radio communications Part 5: Locating systems SANS 19762-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) ISO/IEC 2008 All rights reserved vIntroduction ISO/IEC 19762 is intended

23、 to facilitate international communication in information technology, specifically in the area of automatic identification and data capture (AIDC) techniques. It provides a listing of terms and definitions used across multiple AIDC techniques. Abbreviations used within each part of ISO/IEC 19762 and

24、 an index of all definitions used within each part of ISO/IEC 19762 are found at the end of the relevant part. SANS 19762-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .SANS 19762-1:2009This s tandard may only be used and printed by ap

25、proved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO/IEC 19762-1:2008(E) ISO/IEC 2008 All rights reserved 1Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC 1 Scope This part

26、of ISO/IEC 19762 provides general terms and definitions in the area of automatic identification and data capture techniques on which are based further specialized sections in various technical fields, as well as the essential terms to be used by non-specialist users in communication with specialists

27、 in automatic identification and data capture techniques. 2 Classification of entries The numbering system employed within ISO/IEC 19762 is in the format nn.nn.nnn, in which the first two numbers (nn.nn.nnn) represent the “Top Level” reflecting whether the term is related to 01 = common to all AIDC

28、techniques, 02 = common to all optically readable media, 03 = linear bar code symbols, 04 = two-dimensional symbols, 05 = radio frequency identification, 06 = general terms relating to radio, 07 = real time locating systems, and 08 = MIIM. The second two numbers (nn.nn.nnn) represent the “Mid Level”

29、 reflecting whether the term is related to 01 = basic concepts/data, 02 = technical features, 03 = symbology, 04 = hardware, and 05 = applications. The third two or three numbers (nn.nn.nnn) represent the “Fine” reflecting a sequence of terms. The numbering in this part of ISO/IEC 19762 employs “Top

30、 Level” numbers (nn.nn.nnn) of 01. 3 Terms and definitions 01.01.01 data reinterpretable representation of information in a formalized manner suitable for communication, interpretation, or processing cf. information ISO/IEC 2382-1:1993, 01.01.02 NOTE 1 Data can be processed by humans or by automatic

31、 means. NOTE 2 Data can be in the form of numbers and characters for example, to which meaning may be ascribed. 01.01.02 information information processing knowledge concerning objects that within a certain context has a particular meaning NOTE 1 Facts, events, things, processes, and ideas, includin

32、g concepts, are examples of objects. SANS 19762-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) 2 ISO/IEC 2008 All rights reservedNOTE 2 Information is something that is meaningful. Data may be regarded as inform

33、ation once its meaning is revealed. ISO/IEC 2382-1:1993, 01.01.01 01.01.03 bit binary digit either of the digits 0 or 1 when used in the binary numeration system 01.01.04 information bit bit used for the representation of user data, rather than for control purposes 01.01.05 least significant bit LSB

34、 bit with the lowest binary value in a group of matching bits NOTE A byte is an example of a group of matching bits. 01.01.06 most significant bit MSB bit with the highest binary value in a group of matching bits NOTE A byte is an example of a group of matching bits. 01.01.07 byte(1) string that con

35、sists of a number of bits, treated as a unit, and usually representing a character or a part of a character ISO/IEC 2382-4:1999, 04.05.08 01.01.08 byte(2) sequential series of bits comprising one character and handled as one unit NOTE 1 The number of bits in a byte is fixed for a given data processi

36、ng system. NOTE 2 The number of bits in a byte is usually 8. NOTE 3 A byte is often eight logical data bits, but may include error detection or correction bits. ISO/IEC 2382-16, 16.04.13 NOTE 4 A measure of the transmission capability of a communication channel expressed in bits.s-1 and related to c

37、hannel bandwidth and signal to noise ratio by the Shannon equation: Capacity, C = B log2 (1 + S/N), where B is the bandwidth and S/N the signal to noise ratio. 01.01.09 hexadecimal, noun Hex method of representing data to base 16, using the numbers 0 to 9 and the letters A to F NOTE Used as a conven

38、ient short hand notation for representing 16 and 32 bit memory addresses. EXAMPLE The number 10 is represented in hexadecimal as A. SANS 19762-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) ISO/IEC 2008 All righ

39、ts reserved 301.01.10 hexadecimal, adj. characterized by a selection choice, or condition that has sixteen possible different values or states, such as the hexadecimal digits 01.01.11 character member of a set of elements used by agreement, for the organization, representation or control of informat

40、ion NOTE Characters may be letters, digits, punctuation marks or other symbols and, by extension, function controls such as space shift, carriage return or line feed contained in a message. IEC 60050-702, 702-05-10 01.01.12 data character single numeric digit, alphabetic character or punctuation mar

41、k, or control character, which represents information 01.01.13 character set finite set of characters that is complete for a given purpose NOTE ASCII is an example of a character set. 01.01.14 code collection of rules that maps the elements of a first set onto the elements of a second set ISO/IEC 23

42、82-4, 04.02.01 01.01.15 code element result of applying a code to an element of a coded set ISO/IEC 2382-4, 04.02.04 01.01.16 coded character set coded set whose elements are single characters ISO/IEC 2382-4, 04.02.03 01.01.17 coded set set of elements that is mapped onto another set according to a

43、code 01.01.18 numeric denoting a character set that includes only numbers cf. alphanumeric 01.01.19 alphanumeric pertaining to data that consist of both letters and digits, and may contain other characters such as punctuation marks SANS 19762-1:2009This s tandard may only be used and printed by appr

44、oved subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) 4 ISO/IEC 2008 All rights reserved01.01.20 digital pertaining to data that consist of digits as well as to processes and functional units that use those data ISO/IEC 2382-1:1993, 01.02.04 NOTE 1 Represented in a binary fo

45、rm rather than a continuously varying analogue form. NOTE 2 In the context of integrated artwork, produced by a number of discrete dots rather than a continuous image. 01.01.21 word(1) set of characters that usually comprises 8, 16, or 32 bits (as used in computers) cf. word(2) 01.01.22 word(2) char

46、acter string or bit string treated as a unit for a given purpose NOTE The length of a computer word is defined by the computer architecture, while special characters or control characters delimit the words in text processing. ISO/IEC 2382-4, 04.06.01 01.01.23 read, verb obtain data from an input dev

47、ice, from a storage device, or from a data medium 01.01.24 read, noun process of retrieving data from some machine-readable medium and, as appropriate, the contention and error control management, and channel and source decoding required to recover and communicate the data entered at source 01.01.25

48、 write(2) send data to an output device, to a data storage device, or to a data medium 01.01.26 encode, verb convert data by the use of a code in such a manner that returning to the original form is possible 01.01.27 decode, verb restore information from its coded representation to the original form

49、 IEC 60050-702 702-05-14 IEC 60050-702 702-09-44 01.01.28 decoding process of restoring information from its coded representation to the original form 01.01.29 incorrect read(1) failure to read correctly all or part of the data set intended to be retrieved from a transponder during read or interrogation process SANS 19762-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 19762-1:2008(E) ISO/IEC 2008 All