1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22230-7 SANS 25639-1:2009 Edition 1 ISO 25639-1:2008 Edition 1SOUTH AFRICAN NATIONAL STANDARD Exhibitions, shows, fairs and conventions Pa
4、rt 1: Vocabulary This national standard is the identical implementation of ISO 25639-1:2008 and is adopted with the permission of the International Organization for Standardization. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911
5、Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 25639-1:2009 Edition 1 ISO 25639-1:2008 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by
6、 National Committee SABS TC 184, Health and safety at live events, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in January 2009. This standard may only be used and printed by approved subscription
7、and freemailing clients of the SABS. Reference number Numro de rfrence ISO 25639-1:2008(E/F) ISO 2008INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 25639-1 First edition Premire dition 2008-11-15Exhibitions, shows, fairs and conventions Part 1: Vocabulary Terminologie du secteur des foires, salons
8、et congrs ou manifestations commerciales Partie 1: Vocabulaire SANS 25639-1:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-1:2008(E/F) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensi
9、ng policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO C
10、entral Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been
11、taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. PDF Exonration de responsabilit Le prsent fichier PDF peut contenir des polices de caractres intgres
12、. Conformment aux conditions de licence dAdobe, ce fichier peut tre imprim ou visualis, mais ne doit pas tre modifi moins que lordinateur employ cet effet ne bnficie dune licence autorisant lutilisation de ces polices et que celles-ci y soient installes. Lors du tlchargement de ce fichier, les parti
13、es concernes acceptent de fait la responsabilit de ne pas enfreindre les conditions de licence dAdobe. Le Secrtariat central de lISO dcline toute responsabilit en la matire. Adobe est une marque dpose dAdobe Systems Incorporated. Les dtails relatifs aux produits logiciels utiliss pour la cration du
14、prsent fichier PDF sont disponibles dans la rubrique General Info du fichier; les paramtres de cration PDF ont t optimiss pour limpression. Toutes les mesures ont t prises pour garantir lexploitation de ce fichier par les comits membres de lISO. Dans le cas peu probable o surviendrait un problme dut
15、ilisation, veuillez en informer le Secrtariat central ladresse donne ci-dessous. COPYRIGHT PROTECTED DOCUMENT DOCUMENT PROTG PAR COPYRIGHT ISO 2008 The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction booklets, technical
16、 publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are: that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications offered for sale; and that this Inte
17、rnational Standard is referenced as the source document. With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at
18、 the address below or ISOs member body in the country of the requester. La reproduction des termes et des dfinitions contenus dans la prsente Norme internationale est autorise dans les manuels denseignement, les modes demploi, les publications et revues techniques destins exclusivement lenseignement
19、 ou la mise en application. Les conditions dune telle reproduction sont les suivantes: aucune modification nest apporte aux termes et dfinitions; la reproduction nest pas autorise dans des dictionnaires ou publications similaires destins la vente; la prsente Norme internationale est cite comme docum
20、ent source. la seule exception mentionne ci-dessus, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lISO ladresse ci-aprs ou du comit membr
21、e de lISO dans le pays du demandeur. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland/Publi en Suisse ii ISO 2008 All rights reserved/Tous droits rservsSANS 25639-1:2009This standard m
22、ay only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-1:2008(E/F) ISO 2008 All rights reserved/Tous droits rservs iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodie
23、s). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and n
24、on-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Pa
25、rt 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies castin
26、g a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 25639-1 was prepared by Project Committee ISO/PC 237, Exhibition terminology. ISO 25639
27、 consists of the following parts, under the general title Exhibitions, shows, fairs and conventions: Part 1: Vocabulary Part 2: Measurement procedures for statistical purposes SANS 25639-1:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO
28、 25639-1:2008(E/F) ISO 2008 All rights reserved/Tous droits rservs vIntroduction This part of ISO 25639 contains a list of terms and definitions often used in the exhibition industry. It is intended to facilitate a common and universal interpretation of these terms and definitions, such that the att
29、ributes associated with them can be objectively compared and correctly visualized. This part of ISO 25639 is intended to help players within the industry relate better when interpreting and understanding the various components that make up an exhibition, and decide whether they wish to take part in
30、the exhibition. This part of ISO 25639 is also intended to help improve professionalism and raise standards for the exhibition industry, and to serve as a guideline for industry players to be more discerning with regard to the various statistical data released on exhibitions. SANS 25639-1:2009This s
31、tandard may only be used and printed by approved subscription and freemailing clients of the SABS.INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 25639-1:2008(E/F) ISO 2008 All rights reserved/Tous droits rservs 1Exhibitions, shows, fairs and conventions Part 1: Vocabulary Terminologie du secteur de
32、s foires, salons et congrs ou manifestations commerciales Partie 1: Vocabulaire 1 Scope 1 Domaine dapplication This part of ISO 25639 specifies terms and definitions that are commonly used in the exhibition industry. They are grouped into the following four categories: individual and entity, which l
33、ists and classifies the various types of people involved in the exhibition industry, type of event, which defines the different types of exhibitions and their related meetings, physical item, which describes the various component sizes of the exhibition, the types of facility and print material, and
34、 miscellaneous. La prsente partie de lISO 25639 spcifie les termes et dfinitions communment utiliss dans le secteur conomique des foires, salons et congrs ou manifestations commerciales. Ils sont regroups en quatre catgories: individus et entits, qui rpertorie et classe les divers types dacteurs con
35、cerns par le secteur des foires, salons et congrs; type dvnement, qui dfinit les types de manifestations commerciales et lensemble des runions associes; lments matriels, qui dcrivent la taille des diverses composantes dune exposition, le type dinstallation et la documentation imprime; divers. 2 Indi
36、vidual and entity 2 Individus et entits 2.1 exhibitor entity that displays products or services accepted by the organizer (2.23), with personnel present at the exhibition (3.1), including main exhibitors (2.2) and co-exhibitors (2.3) NOTE 1 An entity can be a company, a body or an organization. NOTE
37、 2 An exhibitor is sometimes also known as a “direct exhibitor”. 2.1 exposant entit qui prsente des produits ou des services accepts par lorganisateur (2.23) par linterm- diaire de personnel prsent sur la manifestation (3.1), y compris les exposants principaux (2.2) et les co-exposants (2.3) NOTE 1
38、Une entit peut tre une socit, un organis- me ou une organisation. NOTE 2 Un exposant est parfois appel exposant direct. SANS 25639-1:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 25639-1:2008(E/F) 2 ISO 2008 All rights reserved/Tous d
39、roits rservs2.2 main exhibitor exhibitor (2.1) contracting directly with the organ- izer (2.23) 2.2 exposant principal exposant (2.1) qui contracte directement avec lorganisateur (2.23) 2.3 co-exhibitor exhibitor (2.1) on the main exhibitors (2.2) booth (4.1), with its own products or services and p
40、er- sonnel, having the approval of the organizer NOTE A co-exhibitor is sometimes known as a “share exhibitor”. 2.3 co-exposant exposant (2.1) prsent sur le stand (4.1) de lexposant principal (2.2) avec ses propres pro- duits ou services et son propre personnel avec laccord de lorganisateur 2.4 repr
41、esented company entity whose products or services are displayed on an exhibitors (2.1) booth (4.1), without personnel present NOTE 1 An entity can be a company, a body or an organization. NOTE 2 A represented company is not considered to be an “exhibitor” even though it can appear in an exhibition d
42、irectory. NOTE 3 A represented company is sometimes known as an “indirect exhibitor” and it is not considered an “exhibitor”. 2.4 socit reprsente entit dont les produits ou les services sont reprsents sur le stand (4.1) dun exposant (2.1) sans que son personnel y soit prsent. NOTE 1 Une entit peut t
43、re une socit, un organisme ou une organisation. NOTE 2 Une socit reprsente nest pas considre comme un exposant mme si son nom apparat dans lannuaire des exposants. NOTE 3 Une socit reprsente peut parfois tre appele exposant indirect et nest pas considre comme un exposant. 2.5 international exhibitor
44、 foreign exhibitor exhibitor (2.1) whose contractual address with the organizer (2.23) is outside the host country NOTE Where the contractual address of an exhibitor does not represent its nationality, a written declaration by the exhibitor of its nationality can be accepted. 2.5 exposant internatio
45、nal exposant tranger exposant (2.1) dont ladresse figurant sur le contrat pass avec lorganisateur (2.23) se trouve en dehors du pays daccueil de la manifestation NOTE Lorganisateur peut accepter une nationalit dif- frente si ladresse de lexposant figurant sur le contrat pass ne reprsente pas sa nati
46、onalit, sous rserve dune attestation crite de lexposant prcisant sa nationalit. 2.6 national exhibitor domestic exhibitor exhibitor (2.1) whose contractual address with the organizer (2.23) is inside the host country NOTE 1 A national exhibitor is sometimes also known as a “local exhibitor”. 2.6 exp
47、osant national exposant rsident exposant (2.1) dont ladresse figurant sur le contrat pass avec lorganisateur (2.23) se trouve dans le pays daccueil de la manifestation NOTE 1 Un exposant national peut aussi tre appel exposant local. SANS 25639-1:2009This standard may only be used and printed by appr
48、oved subscription and freemailing clients of the SABS.ISO 25639-1:2008(E/F) ISO 2008 All rights reserved/Tous droits rservs 3NOTE 2 Where the contractual address of an exhibitor does not represent its nationality, a written declaration by the exhibitor of its nationality can be accepted. NOTE 2 Lorganisateur peut accepter une nationalit diffrente si ladresse de lexposant figurant sur le contrat pass ne reprsente pas sa nationalit, sous rserve dune attestation crite de lexposant prcisant sa natio- nalit. 2.7 exhibitor staff exhibitor personnel person working on the exhibit
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1