SANS 301908-9-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Base Stations (BS) Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networgl.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 0-626-18642-0 SANS 301908-9:2006Edition 1ETSI EN 301908-9:2002Edition V1.1.1SOUTH AFRICAN NATIONAL STANDARD Electromagnetic compatibility and Radio

4、spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R Base Stations (BS) and User Equipment (UE) for

5、IMT-2000 Third-Generation cellular networks; Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R Esseiltial, or poteiztially Essential, IPRs ilorrfied to ETSI iiz respect of ETSI staldards“. vhich is available from the ETSI S

6、ecretariat. Latest updates are available on the ETSI Web server (htto:/ebapr,.etsi.oro/IPR/honie.nsr,). Pursuant to the ETSI IPR Policy. no investigation. including IPR searches. has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 3

7、 14 (or the updates on the ETSI Web server) which are. or may be. or may become. essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters

8、(ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is inten

9、ded to become a Harmonized Standard. the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC I of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the m

10、utual recognition of their conformity (“the R -,-II * If needed r“-“ . . - - - - - II Scoped by I Interworking via the network* , I equipment 3.3a 11 class or type lnterworking with the network I I n I 3.2 I I New radio harmonized standards Spectrum I Scoped by frequency andlor equipment type EMC I

11、EN 301 489 multi-part EMC standard Generic and product standards also notified under EMC Directive I I I-.- - -1 I - If needed, new standards for human exposure to I I Electromagnetic Fields, I 1 - if needed, new standards for acoustic safety I 3.1 a I,-,-I 1 I I Safety Standards also notified under

12、 LV Directive I I I I 4-Non-radio *-Radio (RE) -+ Figure 1: Modular structure for the various standards used under the R) (GSM): Base Station System (BSS) equipment specification: Radio aspects (GSM 1 1 .2 1 version 8.1.1 Release 1999)“. 6 ETSI TR 101 115: “Digital cellular telecommunications system

13、 (Phase 2+) (GSM): Background for Radio Frequent) (RF) requirements (GSM 05.50 version 8.1.0 Release 1999)“. 11 ETSl EN 301 908-9 V1 .I .I (2002-01) ITU-T Recommendation 0.153 ( 1992): “Basic parameters for the measurement of error performance at bit rates below the primary rate“. hTSI/TIA/EIA-I 36,

14、 Rev C (2001 ): “TDMA Cellular PCS (ANSVTIAEIA-136, Rev C-2001)“ ANSITTIAEIA- 136-1 3 1 -B (2000): “TDMA Third Generation Wireless - Digital Traffic Channel Layer 1 “. ANSITTIAEIA-136-270-C (2001): “TDMA - Third Generation Wireless - Mobile Stations Minimum Performance“. hTSI/TIA/EIA-136-121 -A (199

15、9): “TDMA Cellular PCS - Digital Control Channel Layer 1 “. ETSI TR 100 038 (Vl.3.1) (all parts): “Electromagnetic Compatibility and Radio Spectrum Matters (ERM): Uncertainties in the measurement of mobile radio equipment characteristics“ ETSI EN 300 959: “Digital cellular telecommunications system

16、(Phase 2+) (GSM): Modulation (GSM 05.04 version 8.1.2 Release 1999)“. ETSI TS 100 912: “Digital cellular telecommunications system (Phase 2+) (GSM): Radio subsystem synchronization (GSM 05.10 version 8.4.0 Release 1999)“. ANSI/TIA/EIA-136-280-C (2001 ): “TDMA - Third Generation Wireless - Base Stati

17、ons Minimum Performance“. CEPTtERC Recommendation 74-01 (1999): “Spurious emissions“. ITU-R Recommendation SM.329-8 (2000): “Spurious emissions“. ETSI EN 301 489 (all parts): “Electromagnetic compatibility and Radio spectrum Matters (ERM): ElectroMagnetic Compatibility (EMC) standard for radio equip

18、ment and services“. ETSI EN 300 908: “Digital cellular telecommunications system (Phase 2+) (GSM); Multiplexing and multiple access on the radio path“. Definitions and abbreviations 3.1 Definitions For the purposes of the present document. the terms and definitions given in the R b) intermodulation

19、characteristics: C) receiver blocking. 4.4.6.1 AM suppression characteristics 4.4.6.1.1 Definition Amplitude Modulation (AM) suppression is a measure of the receivers rejection of the amplitude variations caused by interfering signals. 4.4.6.1.2 Limit The reference sensitivity performance as specifi

20、ed in tables B.l and B.la) to B.lc) shall be met when the following signals are simultaneously input to the receiver. - For normal BTS a useful signal. modulated with the relevant supported modulation (GMSK or 8-PSK). at frequency fo. 3 dB above the reference sensitivity level or input level for ref

21、erence performance. whichever is applicable. - A single frequency (f). in the relevant receive band. I f-fol 6 MHz. which is an integer multiple of 200 Hz. a GSM TDMA signal modulated in GMSK and by any 148-bit sequence of the 5 1 I -bit pseudo random bit sequence. defined in ITU-T Recommendation 0.

22、153 7 fascicle IV.4. at a level as defined in table 19. The interferer shall have one timeslot active and the frequency shall be at least 2 channels separated from any identified spurious response. The transmitted bursts shall be synchronized to but delayed in time between 61 bit and 86 bit periods

23、relative to the bursts of the wanted signal. NOTE: When testing this requirement. a notch filter ma! be necessar! to ensure that the co-channel performance of the receiver is not compromised. Table 19: Blocking levels, Normal, Micro and Pico-BTS 4.4.6.1.3 Conformance Conformance tests described in clause 5.5.6.1 shall be performed. BTS type Level Normal (dBm) -35 Micro and pico-BTS M 1 (dBm) -33 M3 (dBm) -23 M2 (dBm) -28 PI (dBm) -26