SANS 3901-2009 Information and documentation - International standard recording code (ISRC)《信息及文献 国际标准记录代码(ISRC)》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22574-2 SANS 3901:2009 Edition 1 ISO 3901:2001 Edition 2SOUTH AFRICAN NATIONAL STANDARD Information and documentation International standa

4、rd recording code (ISRC) This national standard is the identical implementation of ISO 3901:2001, and is adopted with the permission of the International Organization for Standardization. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428

5、 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 3901:2009 Edition 1 ISO 3901:2001 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved by

6、 National Committee SABS SC 46C, Information and documentation Identification and description, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in March 2009. This standard may only be used and printed

7、 by approved subscription and freemailing clients of the SABS.Reference number ISO 3901:2001(E) ISO 2001 INTERNATIONAL STANDARD ISO 3901 Second edition 2001-10-01 Information and documentation International Standard Recording Code (ISRC) Information et documentation Code international normalis des e

8、nregistrements (ISRC) SANS 3901:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 3901:2001(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but

9、 shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this a

10、rea. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use

11、 by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2001 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec

12、tronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.

13、ch Web www.iso.ch Printed in Switzerland ii ISO 2001 All rights reserved SANS 3901:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 3901:2001(E) ISO 2001 All rights reserved iii Foreword ISO (the International Organization for Standardiz

14、ation) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be

15、 represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standar

16、ds are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies cast

17、ing a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 3901 was prepared by Technical Committee ISO/TC

18、46, Information and documentation, Subcommittee SC 9, Presentation, identification and description of documents. This second edition cancels and replaces the first edition (ISO 3901:1986), which has been technically revised. Annex A forms a normative part of this International Standard. Annex B is f

19、or information only. SANS 3901:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 3901:2001(E) iv ISO 2001 All rights reserved Introduction The International Standard Recording Code (ISRC) provides a means of identifying audio recordings a

20、nd music video recordings internationally. An ISRC identifies the recording throughout its life and is intended for use by producers of recordings as well as by copyright organizations, broadcasting organizations, media libraries and archives, etc. SANS 3901:2009This standard may only be used and pr

21、inted by approved subscription and freemailing clients of the SABS.INTERNATIONAL STANDARD ISO 3901:2001(E) ISO 2001 All rights reserved 1 Information and documentation International Standard Recording Code (ISRC) 1 Scope The purpose of this International Standard is to define and promote the use of

22、a standard code for the unique identification of recordings. The International Standard Recording Code (ISRC) may be applied to audio recordings and music video recordings regardless of whether they are in analogue or digital formats. The ISRC shall not be used for the numbering of audio or audiovis

23、ual carriers (e.g. compact discs or videocassettes). Audiovisual recordings, other than music video recordings produced in conjunction with an audio recording, are excluded from the scope of this International Standard. Such audiovisual recordings should be assigned an International Standard Audiovi

24、sual Number (ISAN) in accordance with ISO 15706. 2 Normative reference The following normative document contains provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publi

25、cations do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to appl

26、ies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 3166-1, Codes for the representation of names of countries and their subdivisions Part 1: Country codes 3 Terms and definitions For the purposes of this International Standard the following terms and defin

27、itions apply. 3.1 country code code that identifies the country in which the home office of the registrant for the recording is located at the time the ISRC is assigned 3.2 music video recording audiovisual fixation of which the audio component consists wholly or substantially of a recording of a pe

28、rformance of a musical work or works NOTE In most cases such an audio component is produced in conjunction with a separately issued sound recording. 3.3 recording result of a recording process independent of the type and number of audio or audiovisual carriers and technology used SANS 3901:2009This

29、standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 3901:2001(E) 2 ISO 2001 All rights reserved NOTE The term recording applies to each recorded item which may be used as a separate unit regardless of whether it is issued as part of a larger recorde

30、d work (e.g. each separate track on an album of audio recordings). 3.4 registrant original producer or subsequent owner of the audio recording or music video recording at the time the ISRC is assigned NOTE If the original producer sells a recording, with all rights, before its ISRC is assigned, the

31、acquirer is considered to be the registrant for the purposes of ISRC from then on. 4 Structure and format of the ISRC 4.1 General An ISRC consists of 12 characters and is alphanumeric, using the arabic numerals 0 to 9 and letters of the Roman alphabet. It is divided into four elements in the followi

32、ng order: a) country code (see 4.2); b) registrant code (see 4.3; c) year of reference element (see 4.4); d) designation code (see 4.5). When an International Standard Recording Code is written, printed or otherwise visually presented, it shall be preceded by the letters ISRC and the four elements o

33、f the ISRC shall be separated from each other by a hyphen. EXAMPLE ISRC FR-Z03-97-00212 Code identifier: ISRC Country code: FR (i.e. France) Registrant code: Z03 (i.e. Mercury France) Year of reference: 97 (i.e. 1997) Designation code: 00212 (i.e. 212th recording assigned an ISRC by Mercury France i

34、n 1997) 4.2 Country code The country code identifies the country in which the registrants home office is located at the time the ISRC is assigned. The country code shall consist of two letters and shall be in accordance with the codes specified in ISO 3166-1. EXAMPLES GB United Kingdom DE Germany SE

35、 Sweden SANS 3901:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 3901:2001(E) ISO 2001 All rights reserved 3 4.3 Registrant code The registrant code identifies the producer (or subsequent owner) of the recording at the time the ISRC wa

36、s allocated. Since ISRCs are normally assigned at the point at which the full mastering process is finalized (see A.1.2), the registrant code usually reflects the original producer of the audio recording or music video recording. However, if the original producer sells a recording, with all rights,

37、before its ISRC is assigned, the subsequent owner would be the registrant for the purposes of the ISRC. The registrant code shall consist of three alphanumeric characters (A to Z and 0 to 9). EXAMPLES A83 BMG (Han Kook) Music Co. Ltd. 8G5 77 Productions 28R Inca Productions 191 Sony Music Entertainm

38、ent AG WP0 Warner Music Japan Inc. RIP Riptide Productions Producers shall use the registrant codes assigned to them by the appointed ISRC agency for their country or region (see annex A). 4.4 Year of reference element The year of reference element identifies the year in which the ISRC is allocated

39、to the recording (see A.1.2). The year of reference element shall consist of two characters representing the last two digits of the year in which the ISRC was allocated. It shall be assigned by the registrant. EXAMPLES: 98 1998 01 2001 4.5 Designation code The designation code identifies each record

40、ing or part of a larger recorded work that may be used as a separate unit and that is identified as such by the registrant (e.g. in documentation such as the lists of tracks included with the physical carrier). The designation code shall consist of 5 digits. It shall be assigned by the producer (or

41、subsequent owner) indicated in the registrant code. Numbers for the designation code should be assigned sequentially and shall not be reassigned within the same year indicated by the year of reference element. To ensure that the designation code contains 5 digits, zeros shall be used as fill charact

42、ers at the start of the numerical sequence. EXAMPLES 00476 00477 SANS 3901:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 3901:2001(E) 4 ISO 2001 All rights reserved 5 Administration The ISRC system shall be administered by the Interna

43、tional ISRC Agency appointed for this purpose and by the appropriate ISRC agencies for national, regional or other groupings. SANS 3901:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 3901:2001(E) ISO 2001 All rights reserved 5 Annex A

44、(normative) Guidelines for the application of ISRC A.1 General principles for the allocation of ISRC A.1.1 Each recording shall have its own unique ISRC. A.1.2 An ISRC should be allocated at the point at which the decision to release a recording is taken and before the full mastering process for the

45、 recording is completed. However, backstock created prior to implementation of the ISRC system may also be assigned ISRC. Further details are provided in the ISRC Practical Guide issued by the International ISRC Agency. A.1.3 Any new or changed recording shall be provided with a new ISRC. Any change

46、 in sound or image of a recording which affects the intellectual property rights involved requires the allocation of a new ISRC. A.1.4 If the original registrant sells the recording in unchanged form after it is released, the ISRC for the recording shall remain the same. A.1.5 A separate ISRC shall

47、be assigned to each recorded item which constitutes a separate unit of a larger work (e.g. for each track on an album of recordings). If a registrant intends to exploit part(s) of a larger work separately from the larger work an ISRC should be assigned to each such part of the larger work. When a re

48、cording is re-issued in its entirety as part of another work (e.g. a compilation album), the ISRC for the recording shall remain the same. A.1.6 Re-use of an ISRC that has already been allocated for another recording is not permitted. A.1.7 Designation codes should be assigned sequentially. However,

49、 producers may use other schemes compatible with the 5-digit format of the designation code provided there is no possibility that this will lead to duplicate ISRC being created. A.1.8 The ISRC should be included in all relevant documentation concerning a recording. A.1.9 The issuance of an ISRC shall in no way be related to the process of copyright registration. A.2 Modified versions A.2.1 For the purposes of ISRC assignment, a recording shall be considered as a modified version only if its recorded content has b