SANS 50295-3-1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 3 Test methods《排水及污水用陶瓷粘土管、配件及管接头 第3部分 测试方法》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-19754-4 SANS 50295-3:1991Edition 1 and EN amdt 1, nat. amdt 1EN 295-3:1991Edition 1 and amdt 1Any reference to SABS EN 295-3 is deemedto b

4、e a reference to this standard(Government Notice No. 1373 of 8 November 2002)SOUTH AFRICAN NATIONAL STANDARD Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 3: Test methods This national standard is the identical implementation of EN 295-3:1991 and EN amendment 1, and is

5、 adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 50295-3:1991 Edition 1

6、 and EN amdt 1, nat. amdt 1 EN 295-3:1991 Edition 1 and amdt 1 Table of changes Change No. Date Scope EN amdt 1 1998 Amended to update referenced standards, to modify wording in titles and clauses and to insert a new clause on creep resistance of rigid fairing materials. Nat. amdt 2007 Amended to ch

7、ange the designation from SABS to SANS, with no technical changes. National foreword This South African standard was approved by National Committee StanSA TC 5120.61, Construction standards, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in June 2007. This SANS document supersedes SABS EN 295-3:1991 (edition 1). This page is intentionally left blank