1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21132-5 SANS 53998:2008Edition 1ENV 13998:2001Edition 1SOUTH AFRICAN NATIONAL STANDARD Road transport and traffic telematics Public transp
4、ort Non-interactive dynamic passenger information on ground This national standard is the identical implementation of ENV 13998:2001 and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 preto
5、ria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 53998:2008 Edition 1 ENV 13998:2001 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA SC 71H, In
6、formation technology Intelligent transport systems, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in April 2008. EUROPEAN PRESTANDARDPRNORME EUROPENNEEUROPISCHE VORNORMENV 13998April 2001ICS 03.220.01Eng
7、lish versionRoad transport and traffic telematics - Public transport - Non-interactive dynamic passenger information on groundApplication tlmatique pour le transport routier et lacirculation routire - Transports publics - Informationdynamique et non interactive des voyageurs pour letransport de surf
8、aceThis European Prestandard (ENV) was approved by CEN on 7 March 2001 as a prospective standard for provisional application.The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit theircomments, particularly on the quest
9、ion whether the ENV can be converted into a European Standard.CEN members are required to announce the existence of this ENV in the same way as for an EN and to make the ENV available promptlyat national level in an appropriate form. It is permissible to keep conflicting national standards in force
10、(in parallel to the ENV) until the finaldecision about the possible conversion of the ENV into an EN is reached.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portu
11、gal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN natio
12、nal Members.Ref. No. ENV 13998:2001 ESANS 53998:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Page 2ENV 13998:2001CONTENTSCONTENTS 2FOREWORD 3INTRODUCTION 31SCOPE 42 NORMATIVE REFERENCES 53 TERMS AND DEFINITIONS 63.1 non-interactive dyn
13、amic passenger information VMS 63.2 audio communicator 63.3 interactive information devices 63.4 route 63.5 stop points 63.6 terminus 63.7 schedule 63.8 non-continuous location system 74 LOCATION 84.1 General 84.2 Avoiding obstruction 85 MECHANICAL DESIGN OF THE SIGN 95.1 General 95.2 Method of fixi
14、ng 95.3 Size 95.4 Environmental conditions 96 ELECTRICAL SUPPLY TO SIGN 106.1 Mains supply 106.2 General 107 TYPES OF VMS 117.1 Class 1: Text based 117.2 Class 2: String of pearls display 127.3 Class 3: Graphic/mimic 137.4 General requirements 138 DISPLAY TECHNOLOGY 13ANNEX A (INFORMATIVE) EXAMPLES
15、OF DISPLAY LAYOUTS 14A.1 General 14A.2 Lines display order 14SANS 53998:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Page 3ENV 13998:2001FOREWORDThis European Prestandard has been prepared by Technical Committee CEN/TC278 “Road transpo
16、rt and traffic telematics“, the secretariat of which is held by NEN.According to the CEN/CENELEC Internal Regulations, the national standardsorganizations of the following countries are bound to announce this EuropeanPrestandard: Austria, Belgium, Czech Republic, Denmark, Finland, France,Germany, Gr
17、eece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.INTRODUCTIONThis specification outlines the requirements for electronic variable message signs(VMSs) for the presentation of non-interactive dynamic passenger information onpubl
18、ic road transport (buses and tramways) at different points (mainly stop points).SANS 53998:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Page 4ENV 13998:20011 SCOPEThe passenger information Variable Message Sign (VMS) in this standard i
19、s definedas the non-interactive dynamic man machine interface between a Vehicle Schedulingand Control System, usually including an Automatic Vehicle Monitoring (AVM)system, and the passenger at a stop point or other location. This interface is basicallyvisual. It may also incorporate an audio commun
20、icator to give audio information ondemand for visually impaired users.This standard covers information content, presentation and location.The audio information presentation is not part of this standard. The standard doesnot cover interactive information devices and does not specify display technolog
21、y.The VMS receives the necessary information through transmission means that arenot defined in this standard.SANS 53998:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Page 5ENV 13998:20012 NORMATIVE REFERENCESThis European Prestandard in
22、corporates by dated and undated reference, provisionsfrom other publications. These normative references are cited at the appropriateplaces in the text and publications are listed below. For dated references,subsequent amendments to or revisions of any of these publications apply to thisEuropean Pre
23、standard only when incorporated in it by amendment or revision. Forundated references the latest edition of the publication referred to applies.ISO 31-1 Quantities and units Part 1: Space and timeSANS 53998:2008This s tandard may only be used and printed by approved subscription and freemailing clie
24、nts of the SABS .Page 6ENV 13998:20013 Terms and definitionsFor the purposes of this Prestandard, the following terms and definitions apply.3.1 non-interactive dynamic passenger information VMSequipment which displays real time public road transport arrival information forintending passengers withou
25、t any particular dialogue with the passengers.3.2 audio communicatorprovides the speech output of the visual information, particularly for the partiallysighted and blind.3.3 interactive information devicesdisplay unit and input device that allows the passenger to obtain information on thepublic tran
26、sport service (including or not real time information) through a dialoguewith the device, possibly in a more specific or detailed form than that shown on anon-interactive dynamic passenger information VMS.3.4 routeordered list of points (mainly stop points) defining one single path through the road(
27、or rail) network. A Route may pass through the same point more than once3.5 stop pointsplace where passengers can board or alight from vehicles3.6 terminusend of a route3.7 scheduleword used to characterize the theoretical passage times of a vehicle at the differentstop points along a routeSANS 5399
28、8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Page 7ENV 13998:20013.8 non-continuous location systemcontrary to a continuous location system which allows to get the location of thevehicle at any time if necessary, a non continuous loc
29、ation system is a system whichcan only detect the passage of a vehicle at some specially equipped points(equipped with special detectors for example) and which knows nothing about thelocation of the vehicle between two such points.SANS 53998:2008This s tandard may only be used and printed by approve
30、d subscription and freemailing clients of the SABS .Page 8ENV 13998:20014 LOCATION4.1 GeneralA passenger information VMS should be placed at a location on, or adjacent to, thebus route so that intending passengers can view information concerning the journeythey wish to make. Such places include:Stop
31、 points (at or adjacent to)Terminus pointsTransport interchangesPark and ride terminalsCommercial centresOther areas of high passenger usage4.2 Avoiding obstructionThe location of the passenger information VMS shall be chosen such that:1. it does not disrupt current waiting behaviour, queue formatio
32、n;2. it is not obscured by other passengers;3. it does not form an obstruction to general pedestrian flows.SANS 53998:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Page 9ENV 13998:20015 MECHANICAL DESIGN OF THE SIGN5.1 GeneralAs part of
33、 the “street furniture“, the passenger information VMS shall be designedand manufactured with sufficient robustness for protection against vandalism. It maybe fixed to bus shelters or other structures.The equipment shall be capable of operating to recognised environmental standardsof at least IP 54
34、with the appropriate certificate of compliance.5.2 Method of fixingMechanical fixing guidelines shall be issued to manufacturers of the structures towhich a passenger information VMS is to be attached. These guidelines shall ensureeasy disconnection and access for maintenance purposes. Materials for
35、 these fixingsshall afford substantial protection against vandalism.5.3 SizeThe size and design of the housing shall be designed to blend in with any associatedon-street structure, and shall not present any safety hazards to the public wheninstalled. In some locations, the physical size of the passe
36、nger information VMS maybe critical, especially where street furniture with restricted headroom is used.National safety standards shall be complied with.5.4 Environmental conditionsThe equipment shall comply with national environmental standards.SANS 53998:2008This s tandard may only be used and pri
37、nted by approved subscription and freemailing clients of the SABS .Page 10ENV 13998:20016 ELECTRICAL SUPPLY TO SIGN6.1 Mains supplyIf the passenger information VMS is to be mains supplied, it shall be fed by a 230Vac 5OHz (or EC standard) public utility mains supply, via a fuse and a double poleswit
38、ch to a connector type to mate with sign connector.6.2 GeneralElectrical interfaces shall follow existing national regulations on:Safety requirementsIsolation characteristicsWiring sizesConnectorSolar powerSANS 53998:2008This s tandard may only be used and printed by approved subscription and freema
39、iling clients of the SABS .Page 11ENV 13998:20017 TYPES OF VMSThe types of VMS are grouped in the following classes:1. Class 1: Text based2. Class 2: String of pearls3. Class 3: Graphic / mimic7.1 Class 1: Text based7.1.1 Mandatory information1. Route number2. End destination if more than one for th
40、e considered line3. Number of minutes to arrival (if more than 60 min, an indication in hours-minutes is acceptable) or clock time of arrival to the stop point to which theVMS refers. If this information is theoretical schedule information instead ofreal time, this shall be indicated specifically;4.
41、 Vehicle approaching , indication corresponding to the situation where thevehicle is too close to the stop point to allow to display a sufficiently accuratenumeric information (a symbolic presentation is preferred and, in that case, itshould be a square preferably blinking ). If the system cannot di
42、fferentiateapproaching, at stop or just departed vehicle, the same indication shall bedisplayed;5. When there is no vehicle information to be displayed (it could be, for example,during night when there is no Public transport service), the VMS shall displaya positive indication that it is still worki
43、ng (for example: no bus service );6. If there is a disruption of the data link providing real time information to theVMS, if there exists a valid time table in the VMS then this information shallbe displayed with the specific indication mentioned above, if there is no validtime table information the
44、n the display shall reverse to a backup indicationwhich can be blank or a special message indicating the faulty situation;7. If the public transport to a specific stop is interrupted or blocked for anyreason (accident, etc), the display of the arrival time shall be blanked orreplaced by a textual in
45、dication (like “accident” for example)7.1.2 Optional (recommended) information1. Order of arrival2. Operator identity3. Via intermediate destination, remarkable station or any information helpingthe clear identification of the route4. Stop point location (when the VMS is located away from the stop p
46、oint)5. Real-time free-form text messages6. Length of train (in case of tramways or light rail systems)7. Last service indication8. Vehicle equipped for passengers with special needs (handicapped)9. Current timeSANS 53998:2008This s tandard may only be used and printed by approved subscription and f
47、reemailing clients of the SABS .Page 12ENV 13998:20017.1.3 Presentation of the information:Information may be grouped by route or other criteria.In a group, information shall “mirror“ the order of arrival of buses at the stop:in a row format: in order of bus arrival, the first arrival shall be on th
48、e top line.in column format: in order of bus arrival, the first arrival shall be in theleft-hand column.For mandatory information, a line representation is recommended with the routeidentification on the left, then the destination and then the waiting time or time ofarrival.If waiting times are used
49、 the information shall be presented in minutes. Theabbreviations for minutes shall be “min” as specified in ISO 31-1.7.1.4 Alternating rates of mandatory informationThis refers to the alternate display of different information on the same line of theVMS.It is not recommended to alternate between more than 4 different informationmessages,The length of time a frame is held before scrolling or changing to another subset ofthe core bus information shall be:at least 8 seconds for one line of displayat least 8 seconds for two lines of displayat least 10 seconds for three lin
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1