SANS 5621-2009 Determination of total ash content of leather《皮革总灰分测定》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22522-3 SANS 5621:2009Edition 3SOUTH AFRICAN NATIONAL STANDARD Determination of total ash content of leather Published by SABS Standards D

4、ivision 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 5621:2009 Edition 3 Table of changes Change No. Date Scope Foreword This South African standard was approved by National Committee SABS SC 1016A, Test methods leather

5、 and footwear Test methods for leather and footwear, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in July 2009. This document supersedes SABS SM 621:1972 (first revision). SANS 5621:2009 Edition 3 1 Det

6、ermination of total ash content of leather 1 Scope This standard specifies a method for the determination of total ash content of leather. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited ap

7、plies. For undated references, the latest edition of the referenced document (including any amendments) applies. Information on currently valid national and international standards can be obtained from the SABS Standards Division. ISO 4684, Leather Chemical tests Determination of volatile matter. SA

8、NS 5616 (SABS SM 616), Preparation of samples (leather, elastomeric material and other footwear materials). 3 Principle The sample is carbonized and then weighed repeatedly in an open crucible. 4 Apparatus Ordinary laboratory apparatus and in particular: a) Crucibles or dishes that are of glazed por

9、celain, platinum or quartz. b) A muffle furnace that is capable of being maintained at a temperature of 600 C 20 C. c) Dessicator. 5 Preparation of test pieces Prepare the final sample as given in SANS 5616. 6 Procedure 6.1 Weigh out accurately 5 g of the final sample (see clause 5), into a tarred c

10、rucible and place in the furnace at room temperature. SANS 5621:2009 Edition 3 2 6.2 Raise the temperature to 600 C 20 C and maintain this temperature until all the carbon is burnt off. 6.3 Transfer the crucible to a dessicator, cool and weigh. 6.4 Repeat the heating, cooling and weighing until the

11、mass remains constant. 7 Calculation Calculate the total ash content as follows: mAm21= 100 where A is the total ash content, expressed as a percentage; m1is the mass of the test sample, in grams; and m2is the mass of the residue, in grams. To express the result on a 14 % leather moisture basis, mul

12、tiply this value by the factor 86100 cwhere c is the percentage moisture content as determined in ISO 4684. SABS SABS Standards Division The objective of the SABS Standards Division is to develop, promote and maintain South African National Standards. This objective is incorporated in the Standards

13、Act, 2008 (Act No. 8 of 2008). Amendments and Revisions South African National Standards are updated by amendment or revision. Users of South African National Standards should ensure that they possess the latest amendments or editions. The SABS continuously strives to improve the quality of its prod

14、ucts and services and would therefore be grateful if anyone finding an inaccuracy or ambiguity while using this standard would inform the secretary of the technical committee responsible, the identity of which can be found in the foreword. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 The SABS o

15、ffers an individual notification service, which ensures that subscribers automatically receive notification regarding amendments and revisions to South African National Standards. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: salessabs.co.za Buying Standards Contact the Sales Office for

16、South African and international standards, which are available in both electronic and hardcopy format. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: salessabs.co.za South African National Standards are also available online from the SABS website http:/www.sabs.co.za Information on Standa

17、rds The Standards Information Centre provides a wide range of standards-related information on both national and international standards, and is the official WTO/TBT enquiry point for South Africa. The Centre also offers an individual updating service called INFOPLUS, which ensures that subscribers

18、automatically receive notification regarding amendments to, and revisions of, international standards. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za Copyright The copyright in a South African National Standard or any other publication published by the SABS Standards Divisi

19、on vests in the SABS. Unless exemption has been granted, no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means without prior written permission from the SABS Standards Division. This does not preclude the free use, in the course of implementing the sta

20、ndard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any purpose other than implementation, prior written permission must be obtained. Details and advice can be obtained from the Senior Manager. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za