1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22264-2 SANS 60745-2-9:2009Edition 2.1IEC 60745-2-9:2008Edition 2.1SOUTH AFRICAN NATIONAL STANDARD Hand-held motor-operated electric tools
4、 Safety Part 2-9: Particular requirements for tappers This national standard is the identical implementation of IEC 60745-2-9:2008 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in conjunction with SANS 60745-1. Published by SABS Standar
5、ds Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 60745-2-9:2009 Edition 2.1 IEC 60745-2-9:2008 Edition 2.1 Table of changes Change No. Date Scope IEC amdt 1 2008 Amended to add to the scope and to change require
6、ments for mechanical strength and construction, and requirements in annexes K and L. National foreword This South African standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordance with procedures of the SABS Standards Division, in
7、 compliance with annex 3 of the WTO/TBT agreement. This SANS document, by reference, forms part of the Compulsory specification for electrical and electronic apparatus, as published by Government Notice No. R. 89 (Government Gazette 31844) of 6 February 2009. This SANS document was published in July
8、 2009. This SANS document supersedes SANS 60745-2-9:2003 (edition 2). IEC 60745-2-9Edition 2.1 2008-06INTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated electric tools Safety Part 2-9: Particular requirements for tappers Outils lectroportatifs moteur Scurit Partie 2-9: Rgles particu
9、lires pour les taraudeuses INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CAICS 25.140.20 PRICE CODECODE PRIXISBN 2-8318-9702-5SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 2 60745-2
10、-9 IEC:2003+A1:2008 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references .5 3 Terms and definitions .5 4 General requirements.5 5 General conditions for the tests 5 6 Void5 7 Classification5 8 Marking and instructions.5 9 Protection against access to live parts6 10 Starting 6 11 Input and current 6
11、12 Heating 6 13 Leakage current .6 14 Moisture resistance 6 15 Electric strength .6 16 Overload protection of transformers and associated circuits .6 17 Endurance7 18 Abnormal operation 7 19 Mechanical hazards7 20 Mechanical strength .7 21 Construction.7 22 Internal wiring.7 23 Components .7 24 Supp
12、ly connection and external flexible cords 7 25 Terminals for external conductors.7 26 Provision for earthing .7 27 Screws and connections.7 28 Creepage distances, clearances and distances through insulation8 29 Resistance to heat, fire and tracking.8 30 Resistance to rusting8 31 Radiation, toxicity
13、and similar hazards8 Annexes .9 Annex K (normative) Battery tools and battery packs .9 Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources.9 Bibliography9 SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription an
14、d freemailing clients of the SABS .60745-2-9 IEC:2003+A1:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-9: Particular requirements for tappers FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for sta
15、ndardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes I
16、nternational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may partici
17、pate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement betwe
18、en the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publication
19、s have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
20、 misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding
21、national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edi
22、tion of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether di
23、rect or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispen
24、sable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This part of International Standard
25、IEC 60745 has been prepared by subcommittee 61F: Safety of hand-held motor-operated electric tools, of IEC technical committee 61: Safety of household and similar electrical appliances. This consolidated version of IEC 60745-2-9 consists of the second edition (2003) documents 61F/464/FDIS and 61F/48
26、8/RVD and its amendment 1 (2008) documents 61F/674/CDV and 61F/724/RVC. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. It bears the edition number 2.1. A vertical line in the margin shows where the base publication has b
27、een modified by amendment 1. The French version of this standard has not been voted upon. SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 4 60745-2-9 IEC:2003+A1:2008 This publication has been drafted in accordance with th
28、e ISO/IEC Directives, Part 2. This part 2 is to be used in conjunction with the latest edition of IEC 60745-1, Hand-held motor-operated electric tools Safety Part 1: General requirements, and its amendments. It was established on the basis of the third edition (2001) of that standard. NOTE 1 When “P
29、art 1” is mentioned in this standard, it refers to IEC 60745-1. This part 2 supplements or modifies the corresponding clauses of IEC 60745-1, so as to convert that publication into the IEC standard: Safety requirements for electric tappers. When a particular subclause of Part 1 is not mentioned in t
30、his part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 1
31、01 are additional to those in Part 1; additional annexes are lettered AA, BB, etc. NOTE 3 In this standard, the following print types are used: requirements: in roman type; test specifications: in italic type; notes: in smaller roman type. Words in bold in the text are defined in Clause 3. When a de
32、finition concerns an adjective, the adjective and the associated noun are also in bold. The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the da
33、ta related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60745-2-9 IEC:2003+A1:2008 5 H
34、AND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-9: Particular requirements for tappers 1 Scope This clause of Part 1 is applicable except as follows: Addition: This standard applies to tappers. 2 Normative references This clause of Part 1 is applicable. 3 Terms and definitions This clause of Pa
35、rt 1 is applicable except as follows: 3.101 tapper tool intended for cutting internal screw threads 4 General requirements This clause of Part 1 is applicable. 5 General conditions for the tests This clause of Part 1 is applicable. 6 Void 7 Classification This clause of Part 1 is applicable. 8 Marki
36、ng and instructions This clause of Part 1 is applicable, except as follows: SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 6 60745-2-9 IEC:2003+A1:2008 8.1 Addition: In addition the tool shall have the following marking:
37、maximum diameter, in millimetres, of thread which can be cut. The diameter shall refer to a unified ISO thread to be cut into steel having a tensile strength of 390 N/mm and a thickness of twice the thread diameter, unless otherwise indicated on the tool. 9 Protection against access to live parts Th
38、is clause of Part 1 is applicable. 10 Starting This clause of Part 1 is applicable. 11 Input and current This clause of Part 1 is applicable. 12 Heating This clause of Part 1 is applicable, except as follows: 12.4 Replacement: The tool is operated intermittently for 30 cycles or until temperatures s
39、tabilise, whichever is achieved first, each cycle comprising a period of continuous operation of 30 s and a rest period of 90 s with the tool switched off, the tool being loaded during the periods of operation by means of a brake adjusted so as to attain rated input or rated current. The temperature
40、 rises are measured at the end of the “on” period. At the manufacturers option the tool may be operated continuously until thermal stabilisation. 13 Leakage current This clause of Part 1 is applicable. 14 Moisture resistance This clause of Part 1 is applicable. 15 Electric strength This clause of Pa
41、rt 1 is applicable. 16 Overload protection of transformers and associated circuits This clause of Part 1 is applicable. SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60745-2-9 IEC:2003+A1:2008 7 17 Endurance This clause o
42、f Part 1 is applicable. 18 Abnormal operation This clause of Part 1 is applicable. 19 Mechanical hazards This clause of Part 1 is applicable. 20 Mechanical strength This clause of Part 1 is applicable, except as follows: 20.5 This subclause is not applicable. 21 Construction This clause of Part 1 is
43、 applicable, except as follows: 21.32 This subclause is not applicable. 22 Internal wiring This clause of Part 1 is applicable. 23 Components This clause of Part 1 is applicable. 24 Supply connection and external flexible cords This clause of Part 1 is applicable. 25 Terminals for external conductor
44、s This clause of Part 1 is applicable. 26 Provision for earthing This clause of Part 1 is applicable. 27 Screws and connections This clause of Part 1 is applicable. SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 8 60745-2
45、-9 IEC:2003+A1:2008 28 Creepage distances, clearances and distances through insulation This clause of Part 1 is applicable. 29 Resistance to heat, fire and tracking This clause of Part 1 is applicable. 30 Resistance to rusting This clause of Part 1 is applicable. 31 Radiation, toxicity and similar h
46、azards This clause of Part 1 is applicable. SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60745-2-9 IEC:2003+A1:2008 9 Annexes The annexes of Part 1 are applicable except as follows. Annex K (normative) Battery tools and
47、battery packs K.1 Addition: All clauses of this Part 2 apply unless otherwise specified in this annex. K.12.4 This subclause of Part 2 is not applicable. Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources L.1 Addition: All clauses of this Part
48、2 apply unless otherwise specified in this annex. Bibliography The bibliography of Part 1 is applicable. _ SANS 60745-2-9:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .This page has been left blank intentionally SABS Standards Division
49、The objective of the SABS Standards Division is to develop, promote and maintain South African National Standards. This objective is incorporated in the Standards Act, 2008 (Act No. 8 of 2008). Amendments and Revisions South African National Standards are updated by amendment or revision. Users of South African National Standards should ensure that they possess the latest amendments or editions. The SABS continuously strives to improve the quality of its products and s
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1