SANS 60794-3-10-2009 Optical fibre cables Part 3-10 Outdoor cables - Family specification for duct directly buried and lashed aerial optical telecommunication cables《光缆 第3-10部分 户外光.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22553-7 SANS 60794-3-10:2009Edition 2IEC 60794-3-10:2009Edition 2SOUTH AFRICAN NATIONAL STANDARD Optical fibre cables Part 3-10: Outdoor c

4、ables Family specification for duct, directly buried and lashed aerial optical telecommunication cables This national standard is the identical implementation of IEC 60794-3-10:2009 and is adopted with the permission of the International Electrotechnical Commission. Published by SABS Standards Divis

5、ion 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 60794-3-10:2009 Edition 2 IEC 60794-3-10:2009 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Comm

6、ittee SABS SC 74A, Communication technology Fibre optics, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in March 2009. This SANS document supersedes SANS 60794-3-10:2003 (edition 1). IEC 60794-3-10E

7、dition 2.0 2009-01INTERNATIONAL STANDARD Optical fibre cables Part 3-10: Outdoor cables Family specification for duct, directly buried and lashed aerial optical telecommunication cables INTERNATIONAL ELECTROTECHNICAL COMMISSION UICS 33.180.10 PRICE CODEISBN 2-8318-1023-5 Registered trademark of the

8、International Electrotechnical Commission SANS 60794-3-10:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 2 60794-3-10 IEC:2009(E) CONTENTS FOREWORD.3 1 Scope.5 2 Normative references .5 3 Symbols .6 4 Optical fibre, cable construction a

9、nd tests applicable for optical telecommunication cables to be used in ducts, direct buried or lashed aerial applications 7 4.1 Optical fibres.7 4.1.1 Common single-mode fibre requirements.8 4.1.2 Single-mode dispersion unshifted (B1.1) optical fibre 8 4.1.3 Single-mode dispersion unshifted (B1.2) o

10、ptical fibre 8 4.1.4 Single-mode dispersion unshifted (B1.3) optical fibre 9 4.1.5 Single-mode dispersion shifted (B2) optical fibre .9 4.1.6 Single-mode non-zero dispersion (B4) optical fibre9 4.1.7 Single-mode non-zero dispersion shifted (B5) optical fibre 9 4.1.8 Single-mode (B6.a) optical fibre.

11、10 4.2 Cable element .10 4.3 Installation and operating conditions .10 4.4 Mechanical and environmental tests11 4.4.1 Tests applicable 11 4.4.2 Details of family requirements and test conditions for optical fibre cable tests.12 Annex A (normative) Family specification for optical telecommunication c

12、ables to be used in ducts, directly buried or lashed aerial application17 Annex B (informative) Lashed aerial applications.23 Table 1 Common single-mode fibre requirements 8 Table 2 Single-mode dispersion unshifted (B1.1) optical fibre 8 Table 3 Single-mode dispersion unshifted (B1.2) optical fibre

13、8 Table 4 Single-mode dispersion unshifted (B1.3) optical fibre 9 Table 5 Single-mode dispersion shifted (B2) optical fibre.9 Table 6 Single-mode non-zero dispersion (B4) optical fibre9 Table 7 Single-mode non-zero dispersion shifted (B5) optical fibre 9 Table 8 Single-mode (B6.a) optical fibre 10 T

14、able 9 Cable element.10 Table 10 Tests applicable 10 Table 11 Mechanical and environmental applicable tests .11 SANS 60794-3-10:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60794-3-10 IEC:2009(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMIS

15、SION _ OPTICAL FIBRE CABLES Part 3-10: Outdoor cables Family specification for duct, directly buried and lashed aerial optical telecommunication cables FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechn

16、ical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

17、 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, gov

18、ernmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions

19、 or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internatio

20、nal use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order t

21、o promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly

22、 indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall a

23、ttach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal f

24、ees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publica

25、tion. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60794-3-10 has been prepared by subcommittee 86A: Fibres a

26、nd cables, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 2002. It constitutes a technical revision. The main changes are listed below: the title of the specification has been updated to include lashed applications; the fibres spe

27、cification clause (Clause 4) has been enlarged to include fibre Types B5 and B6.a; an annex has been added for additional requirements according to the MICE table. SANS 60794-3-10:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 4 60794-3

28、-10 IEC:2009(E) The text of this standard is based on the following documents: FDIS Report on voting 86A/1245/FDIS 86A/1252/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in acc

29、ordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 60794 series, published under the general title Optical fibre cables, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indic

30、ated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. SANS 60794-3-10:2009

31、This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60794-3-10 IEC:2009(E) 5 OPTICAL FIBRE CABLES Part 3-10: Outdoor cables Family specification for duct, directly buried and lashed aerial optical telecommunication cables 1 Scope This part of IEC

32、 60794 which is a family specification covers optical telecommunication cables to be used in ducts or direct buried applications. The cable may also be used for lashed aerial applications. Requirements of the sectional specification IEC 60794-3 for duct, buried and aerial cables are applicable to ca

33、bles covered by this standard. Clause A.2 contains requirements that supersede the normal requirements in case the cables are intended to be used in installation governed by the MICE table of ISO/IEC 24702. Annex B gives information on the lashed aerial application. The parameters specified in this

34、standard may be affected by measurement uncertainty arising either from measurement errors or calibration errors due to lack of suitable standards. Acceptance criteria shall be interpreted with respect to this consideration (see IEC 60794-3 Clause 8). The number of fibres tested shall be representat

35、ive of the cable design and shall be agreed between the customer and the supplier. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the

36、 referenced document (including any amendments) applies. IEC 60304, Standard colours for insulation for low-frequency cables and wires IEC 60654-4, Operating conditions for industrial-process measurement and control equipment Part 4: Corrosive and erosive influences IEC 60721-1, Classification of en

37、vironmental conditions Part 1: Environmental parameters and their severities IEC 60721-3-3, Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities Stationary use at weatherprotected locations IEC 60793-1-20, Optical fibres Part

38、1-20: Measurement methods and test procedures Fibre geometry IEC 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation IEC 60793-1-44, Optical fibres Part 1-44: Measurement methods and test procedures Cut-off wavelength SANS 60794-3-10:2009This s tandard may only

39、be used and printed by approved subscription and freemailing clients of the SABS . 6 60794-3-10 IEC:2009(E) IEC 60793-1-48, Optical fibres Part 1-48: Measurement methods and test procedures Polarization mode dispersion IEC 60793-2-50, Product specifications Sectional specification for class B single

40、-mode fibres IEC 60794-1-1, Optical fibre cables Part 1: Generic specification General IEC 60794-1-2, Optical fibre cables Part 1-2: Generic specification Basic optical cable test procedures IEC 60794-3, Optical fibre cables Part 3: Sectional specification Outdoor cables IEC 60811-1-1, Common test m

41、ethods for insulating and sheathing materials of electric cables and optical cables Part 1-1: Methods for general application Measurement of thickness and overall dimensions Tests for determining the mechanical properties IEC 60811-5-1, Insulating and sheathing materials of electric and optic cables

42、 Common test methods Part 5-1: Methods specific to filling compounds Drop-point Separation of oil Lower temperature brittleness Total acid number Absence of corrosive components Permittivity at 23 C DC resistivity at 23 C and 100 C IEC 61000-2-5, Electromagnetic compatibility (EMC) Part 2: Environme

43、nt Section 5: Classification of electromagnetic environments. Basic EMC publication IEC 61000-6-2, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments IEC 61326-1, Electrical equipment for measurement, control and laboratory use EMC requirements Part

44、1: General requirements IEC 62363, Radiation protection instrumentation Portable photon contamination meters and monitors ISO/IEC 24702, Information technology Generic cabling Industrial premises 3 Symbols For the purposes of this standard the following symbols apply. ccCabled fibre cut-off waveleng

45、th. d Nominal outer diameter of the cable. DS Detail specification. TLThe acceptable amount of long term tensile load which is expected that the cable may experience during operation (i.e. after installation is completed). This load may be due to residual loading from the installation process and/or

46、 environmental effect. TMThe acceptable amount of short term tensile load which is expected that the cable experience during installation and/or handling . TA1Temperature cycling test temperature limit according to IEC 60794-1-2, Method F1. TA2Temperature cycling test temperature limit according to

47、IEC 60794-1-2, Method F1. TB1Temperature cycling test temperature limit according to IEC 60794-1-2, Method F1. SANS 60794-3-10:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60794-3-10 IEC:2009(E) 7 TB2Temperature cycling test temperatur

48、e limit according to IEC 60794-1-2, Method F1. t1Temperature cycling test dwell time. n d A value, n, times cable outer diameter, d, used for bends, mandrels, etc. 4 Optical fibre, cable construction and tests applicable for optical telecommunication cables to be used in ducts, direct buried or lash

49、ed aerial applications 4.1 Optical fibres Attenuation at the wavelength 1 625 nm is optionally specified by the customer. SANS 60794-3-10:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 8 60794-3-10 IEC:2009(E) 4.1.1 Common single-mode fibre requirements Table 1 Common single-mode fibre requirements Characteristics (9) IEC 60794-3 clause/sub