SANS 61000-3-2-2009 Electromagnetic compatibility (EMC) Part 3-2 Limits - Limits for harmonic current emissions (equipment input current = 16 A per phase)《电磁兼容性(EMC) 第3-2部分 限值 谐波电流.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22961-0 SANS 61000-3-2:2009Edition 3.2IEC 61000-3-2:2009 Edition 3.2 SOUTH AFRICAN NATIONAL STANDARD Electromagnetic compatibility (EMC) P

4、art 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) This national standard is the identical implementation of IEC 61000-3-2:2009, and is adopted with the permission of the International Electrotechnical Commission. Published by SABS Standards Division 1 Dr

5、Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 61000-3-2:2009 Edition 3.2 IEC 61000-3-2:2009 Edition 3.2 Table of changes Change No. Date Scope IEC amdt 1 2008 Amended to add definitions for the repeatability, reproducibility

6、and variability of results of measurement, and provide additional test conditions for the measurement of harmonic currents associated with equipment such as vacuum cleaners and IT equipment. IEC amdt 2 2009 Amended to add two normative references, a definition for total harmonic distortion and a sim

7、plified test method for equipment that undergoes minor changes or updates, and to replace and add a new figure 2 and text relating to measurement procedure, limits for Class C equipment, and test conditions for audio amplifiers, lamps and washing machines. National foreword This South African standa

8、rd was approved by National Committee SABS TC 73, Electromagnetic compatibility, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in June 2009. This SANS document supersedes SANS 61000-3-2:2006 (editio

9、n 3 as modified by IEC amdt 1:2008). IEC 61000-3-2Edition 3.2 2009-04INTERNATIONAL STANDARD NORME INTERNATIONALEElectromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) Compatibilit lectromagntique (CEM) Partie 3-2: Limites L

10、imites pour les missions de courant harmonique (courant appel par les appareils 16 A par phase) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CGICS 33.100.10 PRICE CODECODE PRIXISBN 2-8318-1034-6 Registered trademark of the International Electrotechnical Commis

11、sion Marque dpose de la Commission Electrotechnique Internationale SANS 61000-3-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 2 61000-3-2 IEC:2005+A1:2008 +A2:2009 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references7

12、3 Definitions 8 4 General 12 5 Classification of equipment .12 6 General requirements .13 6.1 Control methods 13 6.2 Harmonic current measurement .14 6.3 Equipment in a rack or case.16 7 Harmonic current limits .17 7.1 Limits for Class A equipment .19 7.2 Limits for Class B equipment .19 7.3 Limits

13、for Class C equipment .19 7.4 Limits for Class D equipment .20 Annex A (normative) Measurement circuit and supply source.22 A.1 Test circuit.22 A.2 Supply source 22 Annex B (normative) Requirements for measurement equipment 25 Annex C (normative) Type test conditions.26 C.1 General26 C.2 Test condit

14、ions for television (TV) receivers .26 C.3 Test conditions for audio amplifiers 27 C.4 Test conditions for video-cassette recorders.28 C.5 Test conditions for lighting equipment 28 C.6 Test conditions for independent and built-in incandescent lamp dimmers29 C.7 Test conditions for vacuum cleaners 29

15、 C.8 Test conditions for washing machines 29 C.9 Test conditions for microwave ovens 29 C.10 Test conditions for information technology equipment (ITE) 30 C.11 Test conditions for induction hobs 31 C.12 Test conditions for air conditioners.31 C.13 Test conditions for kitchen machines as defined in I

16、EC 60335-2-14 31 C.14 Test conditions for arc welding equipment which is not professional equipment 32 SANS 61000-3-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .61000-3-2 IEC:2005+A1:2008 3 +A2:2009 Figure 1 Flowchart for determining

17、 conformity 18 Figure 2 Illustration of the relative phase angle and current parameters described in 7.3 b) 19 Figure A.1 Measurement circuit for single-phase equipment23 Figure A.2 Measurement circuit for three-phase equipment.24 Table 1 Limits for Class A equipment .20 Table 2 Limits for Class C e

18、quipment .21 Table 3 Limits for Class D equipment .21 Table 4 Test observation period .21 Table C.1 Conventional load for arc welding equipment tests32 SANS 61000-3-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 4 61000-3-2 IEC:2005+A

19、1:2008 +A2:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROMAGNETIC COMPATIBILITY (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardizat

20、ion comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internatio

21、nal Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in t

22、his preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the tw

23、o organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have th

24、e form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinter

25、pretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national

26、or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of t

27、his publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or i

28、ndirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for

29、 the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61000-3-2 has been

30、 prepared by sub-committee 77A: Low-frequency phenomena, of IEC technical committee 77: Electromagnetic compatibility. This consolidated version of IEC 61000-3-2 consists of the third edition (2005) documents 77A/503/FDIS and 77A/516/RVD, its amendment 1 (2008) documents 77A/625/FDIS and 77A/641/RVD

31、 and its amendment 2 (2009) documents 77A/674/FDIS and 77A/677/RVD. The technical content is therefore identical to the base edition and its amendments and has been prepared for user convenience. It bears the edition number 3.2. A vertical line in the margin shows where the base publication has been

32、 modified by amendments 1 and 2. SANS 61000-3-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .61000-3-2 IEC:2005+A1:2008 5 +A2:2009 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has d

33、ecided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, repla

34、ced by a revised edition, or amended. SANS 61000-3-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 6 61000-3-2 IEC:2005+A1:2008 +A2:2009 INTRODUCTION IEC 61000 is published in separate parts, according to the following structure: Part

35、1: General General considerations (introduction, fundamental principles) Definitions, terminology Part 2: Environment Description levels Classification of the environment Compatibility levels Part 3: Limits Emission limits Immunity limits (in so far as they do not fall under the responsibility of th

36、e product committees) Part 4: Testing and measurement techniques Measurement techniques Testing techniques Part 5: Installation and mitigation guidelines Installation guidelines Mitigation methods and devices Part 6: Generic standards Part 9: Miscellaneous Each part is further subdivided into sectio

37、ns which are to be published either as international standards, technical specifications, or as technical reports. These standards and reports will be published in chronological order and numbered accordingly (for example, 61000-6-1). This part is an international standard which gives emission limit

38、s for harmonic currents from equipment having an input current up to and including 16 A per phase. This part is a Product Family Standard. SANS 61000-3-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .61000-3-2 IEC:2005+A1:2008 7 +A2:200

39、9 ELECTROMAGNETIC COMPATIBILITY (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) 1 Scope This part of IEC 61000 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of th

40、e input current which may be produced by equipment tested under specified conditions. Harmonic components are measured according to Annexes A and B. This part of IEC 61000 is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to

41、 be connected to public low-voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from

42、 this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C. For systems with nominal voltages less than 220 V (line-to-neutral), the

43、 limits have not yet been considered. NOTE The words apparatus, appliance, device and equipment are used throughout this standard. They have the same meaning for the purpose of this standard. 2 Normative references The following referenced documents are indispensable for the application of this docu

44、ment. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050(131), International Electrotechnical Vocabulary (IEV) Chapter 131: Electric and magnetic circuits IEC 60050(161), Internatio

45、nal Electrotechnical Vocabulary (IEV) Chapter 161: Electro-magnetic compatibility IEC 60107-1, Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations Measurements at radio and video frequencies SANS 61000-3-2:2009This s tandard may only be used and

46、printed by approved subscription and freemailing clients of the SABS . 8 61000-3-2 IEC:2005+A1:2008 +A2:2009 IEC 60155, Glow-starters for fluorescent lamps IEC 60268-1:1985, Sound system equipment Part 1: General IEC 60268-3, Sound system equipment Part 3: Amplifiers IEC 60335-2-2, Household and sim

47、ilar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-14, Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines IEC 60974-1, Arc welding equipment Part 1:

48、Welding power sources IEC 61000-2-2, Electromagnetic compatibility (EMC) Part 2: Environment Section 2: Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems IEC/TS 61000-3-4, Electromagnetic compatibility (EMC) Part 3-4: Limits Limit

49、ation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A IEC 61000-3-12, Electromagnetic compatibility (EMC) Part 3-12: Limits Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase IEC 61000-4-7, Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmo