1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-23281-8 SANS 61243-1:2010Edition 2.1 (incorporating IEC corr. 1) IEC 61243-1:2009Edition 2.1(incorporating corr. 1) SOUTH AFRICAN NATIONAL
4、 STANDARD Live working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. This national standard is the identical implementation of IEC 61243-1:2009 (which incorporates IEC corrigendum 1), and is adopted with the permission of the International Electrotechnical Com
5、mission. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 61243-1:2010 Edition 2.1 (incorporating IEC corr. 1) IEC 61243-1:2009 Edition 2.1 (incorporating corr. 1) Table of changes Chang
6、e No. Date Scope IEC corr. 1 2005 Changed to replace a figure that illustrates the connection of the V-shape bars. IEC amdt 1 2009 Amended to update referenced standards; to change the terms and definitions, the functional requirements and the minimum lengths of the insulating elements of voltage de
7、tectors; to add an item of marking, test procedures and a new table on the classification of defects in annex D. National foreword This South African standard was approved by National Committee SABS SC 67E, Electricity distribution systems and components Electricity distribution, in accordance with
8、procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in March 2010. This SANS document supersedes SANS 61243-1:2007 (edition 2 as modified by IEC corr. 1:2005). IEC 61243-1Edition 2.1 2009-06INTERNATIONAL STANDARD NORME INTE
9、RNATIONALELive working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. Travaux sous tension Dtecteurs de tension Partie 1: Type capacitif pour usage sur des tensions alternatives de plus de 1 kVINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQU
10、E INTERNATIONALE CLICS 29.240.99 PRICE CODECODE PRIXISBN 2-8318-1043-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale SANS 61243-1:2010This s tandard may only be used and printed by approved subscription and freemai
11、ling clients of the SABS . 2 61243-1 IEC:2003+A1:2009 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms and definitions .8 4 Requirements .12 4.1 General requirements12 4.1.1 Safety12 4.1.2 Indication.12 4.2 Functional requirements 12 4.2.1 Clear indication .12 4.2.2 Cle
12、ar perceptibility.13 4.2.3 Temperature and humidity dependence of the indication .14 4.2.4 Frequency dependence .14 4.2.5 Response time 14 4.2.6 Power source dependability.14 4.2.7 Testing element.14 4.2.8 Non-response to d.c. voltage .15 4.2.9 Time rating 15 4.3 Electrical requirements15 4.3.1 Insu
13、lating material .15 4.3.2 Protection against bridging 15 4.3.3 Resistance against sparking 15 4.4 Mechanical requirements.15 4.4.1 Design.15 4.4.2 Dimensions, construction.16 4.4.3 Grip force and deflection .17 4.4.4 Vibration resistance.17 4.4.5 Drop resistance .17 4.4.6 Shock resistance .17 4.5 Ma
14、rkings .17 4.6 Instructions for use18 5 Specific requirements .18 5.1 For insulating element of a voltage detector as a complete device.18 5.1.1 Dielectric strength .18 5.1.2 Leakage current 18 5.2 For indicator casing of voltage detector as a separate device18 6 Tests 18 6.1 General .18 6.1.1 Tests
15、 under wet conditions 19 6.1.2 Type test .19 6.1.3 Test methods.20 SANS 61243-1:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .61243-1 IEC:2003+A1:2009 3 6.2 Function tests20 6.2.1 Clear indication .20 6.2.2 Clear perceptibility of visua
16、l indication.23 6.2.3 Clear perceptibility of audible indication.24 6.2.4 Frequency dependence .25 6.2.5 Response time 26 6.2.6 Power source dependability.26 6.2.7 Check of testing element .26 6.2.8 Non-response to d.c. voltage .27 6.2.9 Time rating 27 6.3 Dielectric tests 27 6.3.1 Protection agains
17、t bridging for indoor/outdoor type voltage detector 27 6.3.2 Protection against bridging for outdoor type voltage detector.29 6.3.3 Spark resistance30 6.4 Mechanical tests .31 6.4.1 Visual and dimensional inspection .31 6.4.2 Grip force and deflection (only applicable for voltage detector as a compl
18、ete device)31 6.4.3 Vibration resistance.32 6.4.4 Drop resistance .32 6.4.5 Shock resistance .32 6.4.6 Climatic dependence .33 6.4.7 Durability of markings33 7 Specific tests34 7.1 Leakage current for voltage detector as a complete device34 7.1.1 Leakage current under dry conditions 34 7.1.2 Leakage
19、 current under wet conditions (for outdoor type only) 34 8 Conformity assessment of voltage detectors having completed the production phase 35 Annex A (normative) Suitable for live working; double triangle .51 Annex B (normative) Instructions for use .52 Annex C (normative) Chronology of type tests
20、.53 Annex D (normative) Classification of defects and tests to be allocated .55 Annex E (normative) Mechanical shock tests Pendulum method .57 Annex F (Deleted)59 Annex G (informative) In-service care 60 Bibliography62 SANS 61243-1:2010This s tandard may only be used and printed by approved subscrip
21、tion and freemailing clients of the SABS . 4 61243-1 IEC:2003+A1:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIVE WORKING VOLTAGE DETECTORS Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organiza
22、tion for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC
23、 publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
24、 may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agr
25、eement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC
26、 Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are use
27、d or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the co
28、rresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have th
29、e latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever
30、, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications
31、 is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard I
32、EC 61243-1 has been prepared by IEC technical committee 78: Live working. This edition includes the following major technical changes from the previous edition: a) the Scope has been extended to cover the use on electrical systems for voltages up to 765 kV a.c.; b) the notion of family of voltage de
33、tectors which are identical in terms of design and dimensions and only differ by their nominal voltages (or nominal voltage ranges) has been included; c) the classification in terms of the setting of the threshold voltage to give a clear indication has been eliminated; d) a new test set-up with bars
34、 has been introduced. Depending on the nominal voltage of the voltage detector, it is required or becomes an alternative test set-up for checking the influence of interference fields, the influence of interference voltages, the protection against bridging and the spark resistance; SANS 61243-1:2010T
35、his s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .61243-1 IEC:2003+A1:2009 5 e) the revision of specific dielectric tests has been included; f) some test procedures (clear perceptibility of audible indication, drop resistance, climatic dependenc
36、e) have been improved and completed. This consolidated version of IEC 61243-1 consists of the second edition (2003) documents 78/527/FDIS and 78/537/RVD, its amendment 1 (2009) documents 78/751/CDV and 78/794/RVC and its corrigendum of October 2005. The technical content is therefore identical to th
37、e base edition and its amendment and has been prepared for user convenience. It bears the edition number 2.1. A vertical line in the margin shows where the base publication has been modified by amendment 1. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 6124
38、3 consists of the following parts, under the general title Live working Voltage detectors: Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. Part 3: Two-pole low-voltage type Part 5: Voltage detecting systems (VDS
39、) The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfir
40、med, withdrawn, replaced by a revised edition, or amended. SANS 61243-1:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 6 61243-1 IEC:2003+A1:2009 INTRODUCTION This International Standard has been prepared according to the requirements o
41、f IEC 61477, where applicable. SANS 61243-1:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .61243-1 IEC:2003+A1:2009 7 LIVE WORKING VOLTAGE DETECTORS Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. 1 Scope This part of
42、 IEC 61243 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 765 kV a.c., and frequencies of 50 Hz and/or 60 Hz. This part applies only to voltage detectors of capacitive type used in contact with the part to
43、 be tested, as a complete device including its insulating element or as a separate device, adaptable to an insulating stick which, as a separate tool, is not covered by this standard (see 4.4.1 for general design). Other types of voltage detectors are not covered by this part of the standard. Some r
44、estrictions on their use are applicable in the case of factory-assembled switchgear and on overhead systems of electrified railways (see Annex B, instructions for use). NOTE Except where otherwise specified, all the voltages defined in this standard refer to values of phase-to-phase voltages of thre
45、e-phase systems. In other systems, the applicable phase-to-phase or phase-to-earth (ground) voltages should be used to determine the operating voltage. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi
46、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60060-1:1989, High-voltage test techniques Part 1: General definitions and test requirements IEC 60068-1, Environmental testing -Part 1: General and guidance IEC 60068-2-
47、6:1995, Environmental testing Tests Test Fc and guidance: Vibration (sinusoidal) IEC 60068-2-14:1984, Environmental testing Tests Test N: Change of temperature Amendment 1 (1986) IEC 60068-2-32:1975, Environmental testing Tests Test Ed: Free fall Amendment 2 (1990) IEC 60071-1:2006, Insulation co-or
48、dination Part 1: Definitions, principles and rules IEC 60417-DB:20021, Graphical symbols for use on equipment IEC 60942, Electroacoustics Sound calibrators IEC 61260:1995, Electroacoustics Octave-band and fractional-octave-band filters _ 1“DB” refers to the IEC on-line database. SANS 61243-1:2010Thi
49、s s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 8 61243-1 IEC:2003+A1:2009 IEC 61318:2007, Live working Conformity assessment applicable to tools, devices and equipment IEC 61477:2001, Live working Minimum requirements for the utilization of tools, devices and equipment Amendment 1 (2002)2IEC 61672-1:2002, Electroacoustics Sound level meters Part 1: Specifications ISO 286-1:1988, ISO system of limits and fit
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1