SANS 62271-301-2010 High-voltage switchgear and controlgear Part 301 Dimensional standardisation of high-voltage terminals《高压开关设备和控制设备 第301部分 端子尺寸规格标准化》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-20632-1 SANS 62271-301:2010Edition 2IEC/TR 62271-301:2009Edition 2SOUTH AFRICAN NATIONAL STANDARD High-voltage switchgear and controlgear

4、Part 301: Dimensional standardisation of high-voltage terminals This national standard is the identical implementation of IEC/TR 62271-301:2009 and is adopted with the permission of the International Electrotechnical Commission. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Priva

5、te Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 62271-301:2010 Edition 2 IEC/TR 62271-301:2009 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS SC 67A, Electricity distri

6、bution systems and components High-voltage switchgear, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in January 2010. This SANS document supersedes SANS 62271-301:2005 (edition 1). IEC/TR 62271-301E

7、dition 2.0 2009-09TECHNICAL REPORT RAPPORT TECHNIQUEHigh-voltage switchgear and controlgear Part 301: Dimensional standardisation of high-voltage terminals Appareillage haute tension Partie 301: Normalisation dimensionnelle des bornes haute tension INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSIO

8、N ELECTROTECHNIQUE INTERNATIONALE HICS 29.130.10 PRICE CODECODE PRIXISBN 2-8318-1060-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale SANS 62271-301:2010This s tandard may only be used and printed by approved subscr

9、iption and freemailing clients of the SABS . 2 TR 62271-301 IEC:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 301: Dimensional standardisation of high-voltage terminals FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide orga

10、nization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,

11、 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt

12、with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by

13、 agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3)

14、 IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are

15、 used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and th

16、e corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they hav

17、e the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatso

18、ever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicat

19、ions is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC

20、 technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. IEC 62271-3

21、01, which is a technical report, has been prepared by subcommittee 17A: High-voltage switchgear and controlgear, of IEC technical committee 17: Switchgear and controlgear. This second edition cancels and replaces the first edition published in 2004 and constitutes a technical revision. The main chan

22、ges with respect to the previous edition are the addition of Clause 2, Terms and definitions, as well as Figures 2 through 7. SANS 62271-301:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .TR 62271-301 IEC:2009 3 The text of this technica

23、l report is based on the following documents: Enquiry draft Report on voting 17A/873/DTR 17A/882/RVCFull information on the voting for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO

24、/IEC Directives, Part 2. A list of all parts of IEC 62271series, published under general title High-voltage switchgear and controlgear, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated o

25、n the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. SANS 62271-301:2010This s tandard may only be used and printed by approved subscription and freem

26、ailing clients of the SABS . 4 TR 62271-301 IEC:2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 301: Dimensional standardisation of high-voltage terminals 1 Scope This technical report applies to high-voltage switchgear and controlgear such as circuit-breakers, disconnectors and switches. However,

27、 its application to other equipment is not excluded. No coordination between dimensions and the rated normal current can be given. 2 Terms and definitions For the purposes of this document, the following terms and definition apply. 2.1 high-voltage (HV) terminal conductive part of switchgear and con

28、trolgear to which a terminal connector is fastened 2.2 terminal connector part that joins a conductor to a HV terminal 3 HV terminals with cylindrical shape The following dimensions are recommended (see Figure 1): SANS 62271-301:2010This s tandard may only be used and printed by approved subscriptio

29、n and freemailing clients of the SABS .TR 62271-301 IEC:2009 5 Ld IEC 1382/04 Diameter d (mm) 20 30 30 30 32 32 40 40 50 50 50 60 80 Corresponding length L (mm) 80 80 125 130 80 130 80 125 40 80 100 125 125 Figure 1 Dimensions for HV terminals with cylindrical shape NOTE Solutions combining two cyli

30、ndrical terminals on the same plate can be used, for example two cylinders of 40 mm 80 mm with a centre distance of 200 mm. 4 HV terminals with rectangular shape The recommended dimensions for rectangular HV terminals should be restricted to the diameters of and the distances between the holes. The

31、dimensions are as follows: hole diameters: 14 mm, 16 mm, 17 mm, 18 mm 19 mm and 22 mm; distance between holes: 40 mm, 45 mm, 50 mm and 60 mm (centre-to-centre). NOTE A hole diameter of 14,3 mm and distance between holes of 44,5 mm exist in certain countries. Any possible combination of these dimensi

32、ons is permitted. The distance between holes should be applied to two adjacent holes, both along the abscissa or ordinate. Typical examples of hole arrangements are given in Figures 2 through 7. SANS 62271-301:2010This s tandard may only be used and printed by approved subscription and freemailing c

33、lients of the SABS . 6 TR 62271-301 IEC:2009 ACA mm C mm 32 14 40 14 44,5 14,3 Figure 2 Two hole HV terminals ABCA mm B mm C mm 40 40 14 44,5 44,5 14,3 45 45 14 45 45 16 50 50 14 Figure 3 Four hole HV terminals (2 2 hole pattern) IEC 1811/09 IEC 1812/09 SANS 62271-301:2010This s tandard may only be

34、used and printed by approved subscription and freemailing clients of the SABS .TR 62271-301 IEC:2009 7 ABBCA mm B mm C mm 44,5 44,5 14,3 45 45 14 45 45 16 Figure 4 Six hole HV terminal (2 3 hole pattern) A mm B mm C mm 44,5 44,5 14,3 45 45 14 45 45 16 Figure 5 Six hole HV terminal (3 2 hole pattern)

35、 IEC 1813/09 IEC 1814/09 SANS 62271-301:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 8 TR 62271-301 IEC:2009 A mm B mm C mm 50 50 14 Figure 6 Eight hole HV terminal (2 4 hole pattern) A mm B mm C mm 45 45 16 40 40 14 Figure 7 Nine hol

36、e HV terminal (3 3 hole pattern) _ IEC 1815/09 IEC 1816/09 SANS 62271-301:2010This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .SABS Standards Division The objective of the SABS Standards Division is to develop, promote and maintain South Afric

37、an National Standards. This objective is incorporated in the Standards Act, 2008 (Act No. 8 of 2008). Amendments and Revisions South African National Standards are updated by amendment or revision. Users of South African National Standards should ensure that they possess the latest amendments or edi

38、tions. The SABS continuously strives to improve the quality of its products and services and would therefore be grateful if anyone finding an inaccuracy or ambiguity while using this standard would inform the secretary of the technical committee responsible, the identity of which can be found in the

39、 foreword. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 The SABS offers an individual notification service, which ensures that subscribers automatically receive notification regarding amendments and revisions to South African National Standards. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928

40、 E-mail: salessabs.co.za Buying Standards Contact the Sales Office for South African and international standards, which are available in both electronic and hardcopy format. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: salessabs.co.za South African National Standards are also available

41、online from the SABS website http:/www.sabs.co.za Information on Standards The Standards Information Centre provides a wide range of standards-related information on both national and international standards, and is the official WTO/TBT enquiry point for South Africa. The Centre also offers an indiv

42、idual updating service called INFOPLUS, which ensures that subscribers automatically receive notification regarding amendments to, and revisions of, international standards. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za Copyright The copyright in a South African National S

43、tandard or any other publication published by the SABS Standards Division vests in the SABS. Unless exemption has been granted, no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means without prior written permission from the SABS Standards Division. Thi

44、s does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any purpose other than implementation, prior written permission must be obtained. Details and advice can be obtained from the Senior Manager. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za