SANS 740-2-2008 General methods of test for pigments and extenders Part 2 Determination of matter volatile at 105 C《颜料及添加剂测试一般方法 第2部分 在105℃下的挥发性物质测定》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21219-3 SANS 740-2:2008Edition 1ISO 787-2:1981Edition 1SOUTH AFRICAN NATIONAL STANDARD General methods of test for pigments and extenders

4、Part 2: Determination of matter volatile at 105 C This national standard is the identical implementation of ISO 787-2:1981 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 preto

5、ria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 740-2:2008 Edition 1 ISO 787-2:1981 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA SC 5140.11

6、D, Paints and varnishes Industrial coatings, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in April 2008. International Standard 78712 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(L1YHAPOflHAR OPl-AHM3

7、AL Calculate differ by the mean more than of the 10 % is the mass, in grams, of the residue. two determinations, of the higher value, if they do and report not the result to the nearest 0,l %. 0,l % as “Iess than 0, 1 %“. 7 Test report Report results between 0 and The test report shall contain at le

8、ast the following information : a) the type and identification of the product tested; b) a reference to this International Standard (ISO 787/2); c) the result of the test as indicated in clause 6; d) any deviation, bY agreement or otherwise, from the procedure specified 1 Pa rticularly another test temperature; e) the date of the test. 2 SANS 740-2:2008 Standards South AfricaThis s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .