SANS 9097-2008 Small craft - Electric fans《小艇 电扇》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21978-9 SANS 9097:2008 Edition 1 ISO 9097:1991 Edition 1SOUTH AFRICAN NATIONAL STANDARD Small craft Electric fans This national standard i

4、s the identical implementation of ISO 9097:1991, and is adopted with the permission of the International Organization for Standardization. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS Th

5、is standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 9097:2008 Edition 1 ISO 9097:1991 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS TC 188, Small craft, in

6、accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in September 2008. This standard may only be used and printed by approved subscription and freemailing clients of the SABS.INTERNATIONAL STANDARD First edi

7、tion 1991-09-15 Small traft - Electric fans Navires de plaisance - Ventilateurs 6lectriques .- - _- -T-p - - -. - - -I - .-_- -. _-_- - Reference number ISO 9097: 199 1 (E) SANS 9097:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 9097:

8、1991(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for w

9、hich a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on a

10、ll matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Inter- national Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard

11、ISO 9097 was prepared by Technical Committee ISO/TC 188, Small traft. 0 ISO 1991 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publishe

12、r. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 + Switzerland Printed in Switzerland ii SANS 9097:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.- - - INTERNATIONAL STANDARD ISO 9097:1991 (E) Small tra

13、ft - Electric fans 1 Scope This International Standard specifies requirements and describes test methods for measuring the airflow of fans intended for use in engine compart- ments, galley areas and other spaces on small traft in which mechanical Ventilation is desirable. lt applies to electrically

14、operated fans rated for less than 50 Volts direct current (d.c.). Fans may be of the centrifugal or axial flow type. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- ca

15、tion, the editions indicated were valid. All stan- dards are subject to revision, and Parties to agreements based on this International Standard are encouraged to investigate the possibility of ap- plying the most recent editions of the Standards in- dicated below. Members of IEC and ISO maintain re

16、gisters of currently valid International Standards. ISO 8846:1990, Small traft - Electrical devices - Protection against ignition of surrounding flammable gases. AMCA Standard 210-85/ASHRAE Standard 51-1985, Laborstory Methods of Testing Fans for Rating? BS 848-1:1980, Faris for general purposes - P

17、art ?: Methods of testing Performance. DIN 24163-1:1985, Ventilatoren - Leistungsmes- sung - Normkennlinien. DIN 24163-2:1985, Ventilatoren - Leistungsmes- sung - Normprfstnde. NF X IO-200:1986, RGgles dessais a - BS 848-1, figures 27 a) to d); 5 Electrical requirements - DIN 24163-1, Bild 1, Prfsta

18、ndsanordnung 2, Einbauart C; 5.1 Fans shall be of the 2-wire type, with both the power and return lines insulated from the motor and fan housing. - NF X 10-200. 6.2.2 Fans with ducted inlet, free outlet (category C), see the following Standards: 5.2 Conductors used for connection to the power supply

19、 shall be stranded topper. - AMCA 210-85/ASHRAE 51-1985, figures 13 to 15; NOTE 1 A future International Standard will speci fy re- quirements for extra-low-voltage electrical inst allations. - BS 848-1, figures 28 a) to d); 5.3 If external terminals are provided, they shall be designed or shielded

20、to prevent short-circuiting that could result from accidental contact by a conductive Object. - DIN 24163-1, Bild A, Prfstandsanordnung 1, . Einbauart B; - DIN 24163-2, Bild 4. 5.4 If external motor leads are provided with the fan, they shall be sized in accordance with the power requirement but not

21、 less than a nominal 1 mm? Conductor insulation shall be rated to be used in damp places and be suitable for 60 OC am- bient temperature at 120 % of nominal voltage. 6.2.3 Fans with ducted inlet, ducted outlet (category D), see the following Standards: - AMCA 210.85/ASHRAE 51-1985, figures 9 to 15;

22、- BS 848-1, figures 29 a) to e); - DIN 24163-2, Bild 4. 5.5 A fan shall be protected against continuous locked rotor conditions by NOTE 3 Fans with free inlet and free outlet (category A) are not used in small traft. - integral overcurrent protection; or, - overcurrent protection in the circuit size

23、d to pro- tect the fan motor-; or, 6.3 The procedure for rating a fan is as foilows. Mount the fan to be tested making certain that all mating surfaces are sealed. - being capable of sustaining Operation with a locked rotor for 7 h without generating surface temperatures in excess of 150 OC at an am

24、bient temperature of 60 OC, and without evidente of charring, burning or melting. Run the fan at 120 % of nominal voltage for a break-in period of 3 h Prior to testing. Maintai n the fan oper ,ating voltage throughou t the test. voltage at its nominal 6 Fan rating Correct the airflow readings taken

25、during the test to a Standard density of 1,2 kg/m? 6.1 Fans shall be rated electrically in Volts and in amperes or Watts. Vary the total pressure in sufficient Steps to develop a Performance curve. 2 SANS 9097:2008This standard may only be used and printed by approved subscription and freemailing cl

26、ients of the SABS.ISO 9097:1991(E) 7 Marking c) year of manufacture (may be coded); 7.1 Fans shall be permanently and legibly marked with at least the following information: d) electrical rating in Volts and amperes or alterna- tively in Volts and Watts. a) manufacturers or private labellers name or

27、 trademark; b) model or type identifkation; 7.2 Evidente of compliance with this International Standard shall be indicated by the marking ISO 9097 together with the word “MARINE”, arranged in any suitable manner. SANS 9097:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.