SMPTE RP 225-2005 Registered Private Information in KLV《KLV中的注册保密信息》.pdf

1、 Table of contents Foreword Introduction 1 Scope 2 Normative references 3 Universal label format for registered private information 4 ISO format_identifier registry Annex A Bibliography Foreword SMPTE (the Society of Motion Picture and Television Engineers) is an internationally-recognized standards

2、 developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents. SMPTEs engineering documents, including standards, recommended practices and engineering guidelines, are prepared by SMPTEs technology committees. Parti

3、cipation in these committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organizations, including ISO, IEC, and ITU. SMPTE engineering documents are drafted in accordance with the rules given in Part XIII of its Administrative prac

4、tices. This SMPTE practice was prepared by the Committee on Metadata and Wrapper Technology (W25). Introduction This introduction is informative and does not form a part of this practice. This practice provides a mechanism to carry registered private information using KLV encoding. The primary initi

5、al purpose of this work is to provide a key definition and compatible KLV encoding and bridge to MPEG-2 transport metadata, including the ISO/IEC 13818-1:2000, AMD1, content_labelling_descriptor, and the ATSC A/53B, AMD2, Private Information Descriptor. In its first-defined form here, the registered

6、 private information may be used by any organization by first obtaining a registered format_identifier from the SMPTE Registration Authority as authorized and defined further in ISO/IEC 13818-1. This format_identifier field provides an unambiguous scope for the payload the “private information“. Fur

7、ther, because it is defined as KLV, it allows the information to be carried using standard KLV encoding techniques. The universal label-based key defined in this practice is not intended to be used alone as a label. Page 1 of 4 pages RP 225-2005 Copyright 2005 by THE SOCIETY OF MOTION PICTURE AND TE

8、LEVISION ENGINEERS 595 W. Hartsdale Ave., White Plains, NY 10607 (914) 761-1100 Approved March 9, 2005SMPTE RECOMMENDED PRACTICE Registered Private Information in KLV RP 225-2005 Page 2 of 4 pages 1 Scope This practice defines a mechanism for the carriage of registered private information encoded as

9、 KLV (key-length-value) in conformance with SMPTE 336M. 2 Normative references The following standards contain provisions that, through reference in this text, constitute provisions of this practice. At the time of publication, the editions indicated were valid. All standards are subject to revision

10、, and parties to agreements based on this practice are encouraged to investigate the possibility of applying the most recent edition of the standards indicated below. SMPTE 336M-2004, Television Data Encoding Protocol Using Key-Length-Value ISO/IEC 8825-1:1995 (ITU-T X.690), Information Technology A

11、SN.1 Encoding Rules Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER), and Distinguished Encoding Rules (DER), Pars. 8.1.3.4 and 8.1.3.5 ISO/IEC 13818-1:2000, Information Technology Generic Coding of Moving Pictures and Associated Audio Information: Systems, Section 2.10, A

12、nnex O and Annex P 3 Universal label format for registered private information SMPTE 336M defines the syntax of KLV coding. This practice defines how registered private KLV coded information may be carried when the registry category is set to the “registered private information“ value of 0x05. This

13、practice defines the Universal label (UL) as a key for the KLV coding for all registered private information. Table 1 summarizes the UL field values. The UL key shall be 16 bytes and not prematurely terminated with a zero byte. Table 1 Field descriptions for the UL key for the KLV encoding of privat

14、e information No. Field Description Length Content/Format Ul header 1 OID Object identifier 1 byte Always 6 2 UL size 16-byte size of the UL 1 byte Always 0Eh UL designators 3 UL code Concatenated sub-identifiers ISO, ORG 1 byte Always 2Bh 4 SMPTE designator SMPTE sub-identifier 1 byte Always 34h 5

15、Registry category designator Registry category designator identifying this as a key for the KLV coding of registered private information as per SMPTE 336M 1 byte Always 5 6 Registry designator Registry designator identifying the specific registry 1 byte As defined in table 2 The registry designator

16、field shall be set to one of the defined registries listed in table 2. Values indicated as prohibited or SMPTE reserved shall not be used. The remaining UL fields are set depending on the value of the registry designator. RP 225-2005 Page 3 of 4 pages Table 2 Registry designator values Registry desi

17、gnator value Description 0 Prohibited 1 Indicating that the registry is the ISO format_identifier 2 7FhSMPTE reserved 80h FFhProhibited The SMPTE reserved values (2 7Fh) are intended to allow for the definition of other registries. These values may be assigned in a future version of this practice; f

18、or example the IEEE OUI or similarly managed number spaces. The sections that follow define the remainder of the key UL value and any further constraints of the KLV length and value fields for each registry designator value. 4 ISO format_identifier registry This section only applies when the registr

19、y designator field (byte 6) is set to 1 from table 2, indicating the ISO format_identifier registry. This key construction uses a registered ISO format_identifier value as defined in ISO 13818-1. (For registration of values, see http:/www.smpte-ra.org/mpegreg.html). Use of unregistered format_identi

20、fier values is prohibited here in this use. A summary of bytes 6 through 16 of the key UL, when the ISO format_identifier registry is used, is summarized in table 3. Table 3 Field descriptions for the UL key for the KLV encoding of private information No. Field Description Length Content/Format 6 Re

21、gistry designator Registry designator identifying the ISO/SMPTE format_identifier 1 byte 1 7 Structure designator Designator of the structure variant within the given registry as further defined in this practice indicating that the item designator is set to one of two mappings of the format_identifi

22、er 1 byte 1 or 2 8 Version number Version of the given registry which first defines the item specified by the item designator version 1 defined here 1 byte 1 9-16 Item designator Unique identification of the particular item within the context of the UL designator set to a mapping of the registered f

23、ormat_identifier value 8 bytes See below The structure designator shall be set to either 1 or 2 to indicate which type of mapping of the format_identifier is used in the item designator field. Structure designator values of 0, and 80hthrough FFhinclusive are prohibited; and values of 3 through 7Fhin

24、clusive are SMPTE reserved and shall not be used. When the structure designator is set to 1, this first indicates that the value of the format_identifier is constrained to individual byte values between 0x01 and 0x7F inclusive (such as ASCII text, for example). Second, the item designator shall be c

25、onstructed by mapping the format_identifier value into the first 4 bytes RP 225-2005 Page 4 of 4 pages directly, left-most byte first. For example, if there were a format_identifier value, “ABCD“ (hex 41-42-43-44), the item designator bytes 9-12 would be set to: hex 41-42-43-44. The item designator

26、bytes 13-16 are SMPTE reserved and shall be set to 7Fh. When the structure designator is set to 2, the format_identifier shall be encoded into the first 5 bytes (9-13) according to ISO 8825 BER OID. For example, if there were a format_identifier value, “ABCD“ (hex 41-42-43-44), the item designator b

27、ytes 9-13 would be set to: hex 84-8A-89-86-44. Bytes 14-16 are SMPTE reserved and shall be set to 7Fh. This encoding shall be used whenever any byte of the format_identifier value is outside the range of 01h through 7Fhinclusive. For structure designator values 1 or 2, the version number field is se

28、t to 1 indicating the format defined in this practice. 4.1 KLV length For structure designator values 1 or 2, the KLV length field shall be constructed according to SMPTE 336M, and may be BER short or long form encoded. Values of the length field should be less than 252 bytes in order to permit inte

29、roperability with some transports. 4.2 KLV value For structure designator values 1 or 2, the KLV value field is defined privately by the registrant of the format_identifier value being used and is outside the scope of this practice. Any byte values may be used. Annex A (informative) Bibliography ATS

30、C A/53B, ATSC Digital Television Standard, Amendment #2:2003, Section 5.7.3.4, ATSC Private Information Descriptor IEEE 802-1990, IEEE Standards for Local and Metropolitan Area Networks: Overview and Architecture (http:/standards.ieee.org/regauth/oui/) ISO/IEC 13818-1:2000, Information Technology Generic Coding of Moving Pictures and Associated Audio Information: Systems, Amendment #1, Carriage of Metadata over ITU-T Rec H.222 | ISO/IEC 13818-1 Streams, Section 2.6.54