SMPTE ST 2067-21-2014 Interoperable Master Format - Application #2 Extended.pdf

1、 Copyright 2014 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue, White Plains, NY 10601 (914) 761-1100 Approved July 14, 2014 Table of Contents Page Foreword . 2 Intellectual Property 2 1 Scope . 3 2 Conformance Notation . 3 3 Normative References . 3 4 Overall 4 5 Image Es

2、sence 4 6 Image Track Files . 5 7 Composition . 6 Annex A Bibliography (Informative) 7 Annex B ITU-R BT.2020 Transfer Characteristic Label (Informative) 8 Page 1 of 8 pages SMPTE ST 2067-21:2014 SMPTE STANDARD Interoperable Master Format Application #2 Extended SMPTE ST 2067-21:2014 Page 2 of 8 page

3、s Foreword SMPTE (the Society of Motion Picture and Television Engineers) is an internationally-recognized standards developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents. SMPTEs Engineering Documents, includ

4、ing Standards, Recommended Practices, and Engineering Guidelines, are prepared by SMPTEs Technology Committees. Participation in these Committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organizations, including ISO, IEC and ITU

5、. SMPTE Engineering Documents are drafted in accordance with the rules given in its Standards Operations Manual. SMPTE ST 2067-21:2014 was prepared by Technology Committee 35PM. Intellectual Property At the time of publication no notice had been received by SMPTE claiming patent rights essential to

6、the implementation of this Engineering Document. However, attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. SMPTE shall not be held responsible for identifying any or all such patent rights. SMPTE ST 2067-21:2014 Page 3 of 8 pages 1

7、 Scope This specification extends IMF Application #2 with support for image frames with colorimetry specified in IEC 61966-2-4 and Recommendation ITU-R BT.2020; and a maximum width and height of 3840 and 2160 pixels, respectively. 2 Conformance Notation Normative text is text that describes elements

8、 of the design that are indispensable or contains the conformance language keywords: “shall“, “should“, or “may“. Informative text is text that is potentially helpful to the user, but not indispensable, and can be removed, changed, or added editorially without affecting interoperability. Informative

9、 text does not contain any conformance keywords. All text in this document is, by default, normative, except: the Introduction, any section explicitly labeled as “Informative“ or individual paragraphs that start with “Note:” The keywords “shall“ and “shall not“ indicate requirements strictly to be f

10、ollowed in order to conform to the document and from which no deviation is permitted. The keywords, “should“ and “should not“ indicate that, among several possibilities, one is recommended as particularly suitable, without mentioning or excluding others; or that a certain course of action is preferr

11、ed but not necessarily required; or that (in the negative form) a certain possibility or course of action is deprecated but not prohibited. The keywords “may“ and “need not“ indicate courses of action permissible within the limits of the document. The keyword “reserved” indicates a provision that is

12、 not defined at this time, shall not be used, and may be defined in the future. The keyword “forbidden” indicates “reserved” and in addition indicates that the provision will never be defined in the future. A conformant implementation according to this document is one that includes all mandatory pro

13、visions (“shall“) and, if implemented, all recommended provisions (“should“) as described. A conformant implementation need not implement optional provisions (“may“) and need not implement them as described. Unless otherwise specified, the order of precedence of the types of normative information in

14、 this document shall be as follows: Normative prose shall be the authoritative definition; Tables shall be next; followed by formal languages; then figures; and then any other language forms. 3 Normative References The following standards contain provisions which, through reference in this text, con

15、stitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the standards indicated bel

16、ow. SMPTE ST 2067-20:2013, Interoperable Master Format Application #2 Recommendation ITU-R BT.2020 (08/2012), Parameter Values for Ultra-High Definition Television Systems for Production and International Programme Exchange SMPTE ST 2067-21:2014 Page 4 of 8 pages IEC 61966-2-4 Edition 1.0 (2006-01),

17、 Multimedia Systems and Equipment Colour Measurement and Management Part 2-4: Colour Management Extended-Gamut YCC Colour Space for Video Applications xvYCC 4 Overall 4.1 General The normative provisions of SMPTE ST 2067-20 shall apply in addition to those specified herein unless specified otherwise

18、. 4.2 Shim Parameters Track Files conforming to this specification shall be associated with the shim parameter values specified in SMPTE ST 2067-20 with the exception of those specified in Table 1. Table 1 Shim Parameter Values Definitions Shim Parameter Value shim_id http:/www.smpte- ra.org/schemas

19、/2067-21/2014 picture_bitrate ST 2067-21 picture_format ST 2067-21 5 Image Essence 5.1 Constraints Implementations shall support the combinations of image frame characteristics listed in Table 2. SMPTE ST 2067-21:2014 Page 5 of 8 pages Table 2 Image Characteristics Characteristic Constraint Image Fr

20、ame Width 13840 Image Frame Height 12160 Colorimetry COLOR.3 COLOR.4 COLOR.5 Pixel Bit Depth 8 10 10 Frame Structure Progressive Stereoscopy Monoscopic Stereoscopic Frame Rate 24 24000/1001 25 30 30000/1001 Sampling 4:2:2 Quantization QE.1 Color Components YCBCR Note 1: QE.1 and COLOR.3 are defined

21、in SMPTE ST 2067-20. Note 2: This specification does not support the YCCBCCRC (constant luminance) color components specified in Recommendation ITU-R BT.2020. Note 3: IEC 61966-2-4 uses YCBCR and YCC (luma-chroma-chroma) interchangeably. 5.2 Colorimetry Implementations shall support the mappings of

22、component signals to red, green and blue tristimulus values listed in Table 3. Table 3 Colorimetry Systems System Description COLOR.4 Mapped using method xvYCC709 as specified in IEC 61966-2-4 COLOR.5 Mapped as specified in Recommendation ITU-R BT.2020 6 Image Track Files 6.1 Generic Picture Essence

23、 Descriptor 6.1.1 Transfer Characteristic The value of the Transfer Characteristic item shall be equal to: SMPTE ST 2067-21:2014 Page 6 of 8 pages 06.0E.2B.34.04.01.01.0D.04.01.01.01.01.08.00.00 “IEC 61966-2-4 xvYCC Transfer Characteristic“ in SMPTE RP 224 if the COLOR.4 system is used. 06.0E.2B.34.

24、04.01.01.0E.04.01.01.01.01.09.00.00 “ITU-R.BT2020 Transfer Characteristic“ in SMPTE RP 224 (see Annex B) if the COLOR.5 system is used. 6.1.2 Coding Equations The value of the Coding Equations item shall be equal to 06.0E.2B.34.04.01.01.01.04.01.01.01.02.02.00.00 “Identifies ITU BT-709 Coding Equati

25、ons“ in SMPTE RP 224 if COLOR.4 or COLOR.5 system is used. 6.1.3 Color Primaries The value of the Color Primaries item shall be equal to: 06.0E.2B.34.04.01.01.06.04.01.01.01.03.03.00.00 “ITU-R.BT709 Color Primaries“ in SMPTE RP 224 if the COLOR.4 system is used. 06.0E.2B.34.04.01.01.0D.04.01.01.01.0

26、3.04.00.00 “ITU-R.BT2020 Color Primaries“ in SMPTE RP 224 if the COLOR.5 system is used. 6.1.4 CDCI Picture Essence Descriptor If COLOR.4 or COLOR.5 are used, the values of the Black Ref Level, White Ref level and Color Range items shall be set according to Table 4. Table 4 Black Ref Level, White Re

27、f level and Color Range values for COLOR.4 Colorimetry COLOR.4 COLOR.5 Pixel Bit Depth 8 10 10 Black Ref Level 16 64 64 White Ref level 235 940 940 Color Range 254 1013 897 Note: The White Ref level item applies only to the Y component and the Color Range item to the CB and CR components. 7 Composit

28、ion The ApplicationIdentification element (see SMPTE ST 2067-2 as referenced by SMPTE ST 2067-20) shall include the value listed in Table 5. Table 5 Application Identification http:/www.smpte-ra.org/schemas/2067-21/2014 SMPTE ST 2067-21:2014 Page 7 of 8 pages Annex A Bibliography (Informative) SMPTE

29、 RP 224, SMPTE Labels Register SMPTE ST 2067-21:2014 Page 8 of 8 pages Annex B ITU-R BT.2020 Transfer Characteristic Label (Informative) Table B.1 ITU-R BT.2020 Transfer Characteristic Label Byte No. Description Value (hex) Meaning 1-13 Transfer Characteristic 8 Version Number 0Eh Registry Version at the point of registration of this label 9-13 Transfer Characteristic 14 ITU-R BT.2020 Transfer Characteristic 09h Identifies ITU-R BT.2020 transfer characteristic