SMPTE ST 292-0-2011 SMPTE Bit-Serial Interfaces at 1 5 Gb s C Roadmap for the 292 Document Suite.pdf

1、 Copyright 2011 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue., White Plains, NY 10601 (914) 761-1100 Approved March 30, 2011 Document Roadmap The SMPTE 292 suite of documents defines the mapping of various source image formats onto serial digital interfaces operating at

2、a nominal rate of 1.5 Gb/s. This informative “roadmap” describes the documents in the 292 suite. 1 SMPTE ST 292-1 SMPTE ST 292-1 defines a bit-serial data structure and the coaxial cable interface specifications for 1.5 Gb/s nominal Signal/Data Serial Interface to carry either 1280720, 19201080 or 2

3、0481080 active pixel formats mapped into the 1.5 Gb/s payload. This standard defines the method of serializing the parallel source format data to a serial bit stream. This interface may also carry packetized data mapped into the 1.5 Gb/s transport payload providing the constraints imposed by the ref

4、erence source image formats are observed. This standard specifies a coaxial cable interface suitable for application where the signal loss does not exceed an amount specified by the receiver manufacturer, typical loss amounts would be in the range of up to 20 dB at one-half the clock frequency. Page

5、 1 of 2 pages SMPTE 292-0:2011 SMPTE ROADMAP SMPTE Bit-Serial Interfaces at 1.5 Gb/s Roadmap for the 292 Document Suite SMPTE 292-0:2011 Page 2 of 2 pages 1.1 SMPTE ST 292-1 Document Road Map SMPTE ST 12-1/-2TimecodeSMPTE ST 352Payload IDSMPTE ST 299-1Audio DataSMPTE ST 291ANC Data PacketSMPTE ST 20

6、48-22048x1080 Digital Cinematography Production Image FS/709 Formatting for SDISMPTE ST 292-11.5 Gb/s-SDIReference DocumentsSMPTE ST 2048-12048x1080 and 4096x2160 Digital Cinematography Production Image Formats FS/709SMPTE RP 184JitterConnectorIEC 61169-8SMPTE RP 168Switching Point (Informative)SMPTE ST 292-1Reference DocumentsSMPTE ST 2741920x1080Image FormatsSMPTE ST 2961280x720Image Formats