1、TIAIEIA INTERIM STANDARD Data Service Options for Wideband Spread Spectrum Systems TIA/EIA/IS-707-A (Revision of TIA/EIA/IS707) APRIL 1999 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Electronic Industries Alliance NOTICE TIAEIA Engineering Standards and Publications are designed to serve the public inte
2、rest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publicat
3、ions shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIAEIA members, whether the
4、standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIAEIA does not assume any liability to any patent owner, nor does it assume any obligat
5、ion whatever to parties adopting the Standard or Publication. TIA/EIA INTERIM STANDARDS TIA/EIA Interim Standards contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public revie
6、w and resolution of comments which is a procedural part of the development of a TLARIA Standard. TIAEIA Interim Standards should be reviewed on an annual basis by the formulating Committee and a decision made on whether to proceed to develop a TIA/EIA Standard on this subject. TIAEIA Interim Standar
7、ds must be cancelled by the Committee and removed from the TIA/EIA Standards Catalog before the end of their third year of existence. Publication of this TIA/EIA Interim Standard for trial use and comment has been approved by the Telecommunications Industry Association. Distribution of this TIAEIA I
8、nterim Standard for comme: shall not continue beyond 36 months from the date of publication. It is expected that following this 36 month period, this TIA/EIA Interim Standard, revised as necessary, will be submitted to the American National Standards Institute for approval as an American National St
9、andard. Suggestions for revision should be directed to: Standards that a certain course of action is preferred but not necessarily required; or that (in the negative form) that a certain possibility or course of action is discouraged but not prohibited. May and may not indicate a course of action pe
10、rmissible within the limits of the standard. Can and cannot are used for statements of possibility and capability, whether material, physical, or causal. 1.2 Revision History Revision A includes corrections in chapters 3 and 4. In addition, it supports the following new capabilities: 0 Chapter 2 con
11、tains procedures to support multiple user data encryption modes. 0 Chapter 3 contains support for procedures supporting service switching as described in chapter 4. 0 Chapter 4 contains procedures to support service switching fi-om a service option other than async data or fax to an async data or fa
12、x service option. Chapter 5 contains support for packet zone reconnection control. Chapters 7, 8, and 9 are new. 1.3 Terms Each chapter contains a section defining the terms used in the chapter. The following defines terms used in this chapter. AT Command. Any of the commands in the command set inte
13、rface between data terminal equipment TE) and data circuit terminating equipment CE). Base Station S). A station that provides the means for MSs to access network services using radio. BS/MSC. The base station and mobile switching center considered as a single functional entity. W. An interworking f
14、unction provides information conversion. A data service IWF provides functions needed for a mobile station to communicate with data terminal equipment connected to the network. Mobile Switching Center (MSC). The MSC switches MS originated or MS terminated traffic. An MSC is usually connected to at l
15、east one BS. It may connect to the other public networks (PSTN, ISDN, etc.), other MSCs in the same network, or MSCs in different networks. Mobile Station (MS). A wireless terminal used by subscribers to access network services over a radio interface. MSs include portable units (e.g., hand-helds), u
16、nits installed in 1-2 1 2 3 4 5 6 ? 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 TIA/EIA/IS-707-A. 1 vehicles, and somewhat paradoxically, fixed location MSs. The MS is the interface equipment used to terminate the radio path at the subscriber. Mobile Termination O
17、(MTO). A self-contained data capable mobile termination that does not support an external interface. Mobile Termination 2 (“TZ). A mobile termination that provides a non-ISDN (Rd user interface (e.g., CCITT V series or CCIlT X series). Terminal Equipment 2 (TEZ). A data terminal that provides a non-
18、ISDN (Rd user- network interface (e.g., CCITT V series or CCK“ X series). 1.4 References In this standard, any reference to a procedure defined in another standard will cite the earliest version of the referenced standard in which the procedure is defined. Each chapter contains a references section
19、which identifies the documents referenced in the chapter. The following applies to this chapter. 1.4.1 Informative References The following references do not contain provisions of this standard. At the time of publication, the editions indicated were valid. ANSI/TIA/EIA-617 Inband DCE Control for As
20、ynchronous DTE-DCE Interfaces. TIA/EIA/IS-634-A MSC-BS Interface for Public Wireless Communications Systems, 1998. TIA/EIA/IS-658 Data Services Interworking Function Interface for Wideband Spread Spectrum Systems, 1996. TIA/EIA/IS-728 Intersystem fink Protocol (ISLP), 1997. TIA/EIA/IS-737 Intersyste
21、m Operations Support for Data Services, 1997. “SB100 TR-45 Wireless Network Reference Model. 1.4.2 Normative References The following references contain provisions which, through reference in this text, constitute provisions of this standard. TIA/EIA-95-B Mobile Station-Base Station Compatibility St
22、andard for Dual-Mode Spread Spectrum System. TIA/EIA/IS-99 Data Services Option Standard for Wideband Spread Spectrum Digital Cellular System, 1995. TIA/EIA/IS-657 Packet Data Service Options for Wideband Spread Spectrum Systems, 1996. =B58 Administration of Parameter Value Assignments for TL4/EL4 S
23、pread Spectrum Standards. 1-3 STD-EIA TIA/IS-707-A-ENGL 1997 m 3234b00 ObL4bLL Ab m TIA/EIA/IS-707-A. 1 1 1.5 Stylistic Conventions z Subcommittee TIA TR-45.5 has developed and enhanced this standard over a number of 3 years, using multiple versions of word processing tools and guidelines. Because o
24、f this, 4 there may be stylistic inconsistencies between some of the chapters in the standard. 5 6 7 8 9 10 11 12 In particular, in TIA/EIA/IS-707-A, the editor has used the automatic table and figure numbering capabilities of the word processing software in the new chapters. This allows automatic u
25、pdate of references to those tables and figures without manual intervention. The editor has also used the ability of the word processing software to automatically begin a major section on an odd page. This may cause the word processing software to produce a blank page before the major section, when
26、the previous sections text ends on an odd page. However, it allows text insertion and deletion without requiring corresponding manual insertion or deletion of manually produced blank pages preceding a major section. 13 1-4 ! 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 2 NETWORK REFERENC
27、E MODEL, 2.1 Simplified Network Reference Model The simplified network reference model shown in Figure 2.1 - 1 applies to all CDMA data services described herein. See the TR-45 Wireless Network Reference Model for a more complete model. D BSIMSC o rl SpecificNetmrkEntity “.T , . Cd I ecti ve (Compos
28、 te E nti ty) -(J Interface Reference Poi nt Figure 2.1 -1. Simplified Network Reference Model for CDMA Data Services In general, an MS may be implemented as an MT0 or MT2/TE2 pair. Where this standard differs for the two implementations, the standard uses the terms MT0 and MT2. Otherwise, the stand
29、ard refers to either an MS or a mobile station. 2.2 Network Entities The only network entity that is by definition a physical device is the MS. Each of the others may be a physical device, it may form part of a physical device, or it may be distributed over a number of physical devices. BS/MSC The b
30、ase station and mobile switching center considered as a single functional entity. See base station and mobile switching center. Interworking Function (IWF) An intenvorking function provides information conversion for one or more network entities. It may have an interface to a single network entity,
31、providing 2- 1 1 2 3 4 5 6 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 TIA/EIA/IS-707-A. 1 Mobile Station (MS) Mobile Switching Center (“SC) 2.3 Reference Points Reference Point U, Reference Point x services to that entity, or it may have interfaces to each of two network entities
32、 that interface to each other, providing services to both. A wireless terminal used by subscribers to access network services over a radio interface. MSs include portable units (e.g., hand-helds), units installed in vehicles, and somewhat paradoxically, fmed location MSs. The MS is the interface equ
33、ipment used to terminate the radio path at the subscriber. The MSC switches MS originated or MS terminated traffic. An MSC is usually connected to at least one BS. It may connect to the other public networks (PSTN, ISDN, etc.), other MSCs in the same network, or MSCs in different networks. Reference
34、 point Um is the interface between the base station and the mobile station, which corresponds to the air interface. Reference point x represents any of a number of interfaces between an interworking function 0 and network entity. The following lists interface specifications which support CDMA data s
35、ervices. TIA/EIA/IS-658 Data SenSces Interworking Function Interface for Wideband Spread Spectrum Systems TIA/EIA/IS-634-A MSC-BS Interface for Public Wireless Communications Systems 2-2 1 2 3 3 CDMA DATA SERVICES 3.1 Service Options For Data Services 3. l. 1 Service Option Format CDMA data services
36、 are identifed by Service Options. A Service Option is composed of three fields, the Proprietary Indicator, the Service Option Revision, and the Base Service Option Number (see TSB58), as shown in Figure 3. l. 1-1. The base data service (e.g fax) is identified by the Base Service Option Number. The
37、data service feature set is identified by the Service Option Revision. The first feature set for any base data service is assigned Service Option Revision O, the next is assigned Service Option Revision 1, and so on, up to Service Option Revision 7. 11 Service Option Proprietary Base Service Service
38、 Option Indicator Option Number Revision 1 bit 3 bits 12 bits Figure 3. l. 1 -1. Service Option Format 3.1.2 Assigned Service Options Table 3.1.2-1 lists the Service Options used by CDMA data services. 3- 1 TIA/EIA/IS-707-A. 1 1 2 3 Table 3.1.2-1. Service Options for CDMA Data Services 3.2 Async and
39、 Fax Services Base Service Option Numbers 4, 5, 12, and 13 provide a modem emulation service for async and fax applications. Base Service Option Numbers 4 and 12 support async applications. Base Service Option Numbers 5 and 13 support fax applications. Chapter 4 presents the procedures and requireme
40、nts for these services. 3-2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 I8 19 20 21 22 23 24 25 26 27 3.2.1 Service Revision Guide Table 3.2.1-1 provides a guide for the various async service revisions. Table 3.2.1-2 provides a guide for the various fax service revisions. Table 3.2.1-1. Async Service
41、Revision Guide Base Service Option Number 4 4 12 Option Number No tes I , Service Chapters Revision IS-707 Option Companion O 1 None - 1 12.3 O 12,3 f Yn Table 3 2.1-2. Fax Service Revision Guide MM Service N G C I 2 1 2 1 Chapters Revision O I E R S S X X IS-707 Option S S S P R R P P Companion O y
42、YyYYnnn 2, 3 O YyYyYnny 2, 3 1 YnYnYnyy None N Notes l. Speaker on operation using signaling traffic to carry RLP frames is no longer allowed. Instead, RLP frames are carried as secondary traffic during the time that voice service uses primary traffic. Legend MPXl MPX2 RS 1 RS2 PRI SEC SIG SN SON Y
43、n 2. Handling of multi-line responses that are carried using ANSI/TIA/ELA-617 has been clarified. Examples illustrating the handling of multi-line responses when using AT command reflection are included in Chapter 3, Appendix A. Multiplex Option 1 Multiplex Option 2 Rate Set 1 (9600, 4800, 2400, 120
44、0) Rate Set 2 (14400, 7200, 3600, 1800) Primary Traffic Secondary Traffic Signaling Traffic Service Negotiation Service Option Negotiation Attribute supported Attribute not supported 3-3 1 2 STD-EIA TIA/IS-707-A-ENGL 2777 W 3234b00 Ob14bL7 LT4 TIA/EIA/IS-707-A. 1 Y Attribute supported and the defaul
45、t 3-4 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 STD-EIA TIA/IS-707-A-ENGL L799 S 3234bUU ObL4bLB 030 m TIA/EIA/IS-707-A. 1 3.3 Packet Data Bearer Service Base Service Option Numbers 7.8, 15, and 16 provide a packet data bearer service compatible with many packet data networks.
46、 Base Service Option Numbers 7 and 15 support Internet Protocol (IP) and Connectionless Network Protocol (CLNP) networks. Base Service Option Numbers 8 and 16 support the Cellular Digital Packet Data (CDPD) network. Chapter 5 presents the procedures and requirements for these services. 3.3.1 Service
47、 Revision Guide Table 3.3.1-1 provides a guide for the various packet data bearer service revisions. Table 3.3.1-1. Packet Data Bearer Service Revision Guide Base Service Option Service Option Number Revision 7,8 O 7, 8 1 15, 16 O Companion Chapters IS-707 None 2, 3 2, 3 M P X 1 Y Y Y - - M P X 2 n
48、Y Y - - YY Notes l. Includes optional zone-based reconnection and optional BS control of a packet data dormant timer. 2. Established the packet data service type concept. 3. Packet data inactivity timer mandatory within MS with a minimum value Legend MPXl Multiplex Option 1 MPX2 Multiplex Option 2 R
49、S 1 Rate Set 1 (9600, 4800, 2400, 1200) RS2 Rate Set 2 (14400, 7200, 3600, 1800) SEC Secondary TrafEc SIG Signaling Traffic SN Service Negotiation SON Service Option Negotiation n Attribute not supported of 20 seconds. PH Primary Traffic Y Attribute supported Y Attribute supported and the default 3-5 TIA/EIA/IS-707-A. 1 I 3.4 STU-III Service 2 Base Service Option Numbers 10 and 1 1 provide a secure traffic bearer service for digital 3 US. Government STU-III terminals. Chapter 6 presents the procedures and requirements 4 for these services. 5 3.4.1 Service Revision
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1