TIA EIA IS-807-1-2000 TIA EIA-41-D Enhancements for Internationalization (Addendum No 1)《TIA EIA-41-D增强国际1号补充件》.pdf

1、3 c TIA/EIA INTERIM STANDARD TIMEIA-41-D Enhancements for Internationalization TIMEIA/IS-807- 1 (Addendum No. 1 to TIA/EMS-807) MARCH 2000 , TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications indushy in association with the Electronic Industries Aiance Elsctrrrnr industrim A

2、lliance NOTICE TMIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with mi

3、nimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TMIA fi-om manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards

4、and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TMIA in accordance with the American National Standards Institute (ANSI) patent policy. By such acti

5、on, TMIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. TMIA INTERIM STANDARDS TMIA Interim Standards contain information deemed to be of technical value to the industry, and are published at the request

6、of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a TMIA Standard. TMIA Interim Standards should be reviewed on an annual basis by the formulating Committee and a decision made on whether

7、to proceed to develop a TMIA Standard on this subject. TMIA Interim Standards must be cancelled by the Committee and removed fi-om the TMIA Standards Catalog before the end of their third year of existence. Publication of this TMIA Interim Standard for trial use and comment has been approved by the

8、Telecommunications Industry Association. Distribution of this TMIA Interim Standard for comment shall not continue beyond 36 months fi-om the date of publication. It is expected that following this 36 month period, this TMIA Interim Standard, revised as necessary, will be submitted to the American N

9、ational Standards Institute for approval as an American National Standard. Suggestions for revision should be directed to: Standards & Technology Department, Telecommunications Industry Association, 2500 Wilson Boulevard, Arlington, VA 22201. (From Project No. 4733, formulated under the cognizance o

10、f the TIA TR-45.2 Subcommittee on Wireless Intersystem Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2000 Standards & Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEE

11、RING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. IS-807-1 Documentation Conventions The published version of IS-807, TIAEIA-41-D Enhancements for Internationalization, contains technical errors

12、and omissions. The following problem has been noted 1. Translation Type 9 is no longer recommended for “ANSI SS7 - E.212 Global Title”. This erratum consists of page replacements to the published document. Changes from the published version are noted by double-underlining, t&+k&w& and double change

13、bars. The page number of the following sheet identifies the page that it replaces in IS-807. TINEINIS-807 Addendum 1 I TINEIA-IS-807-1 Global Title Translation on IMSI ITU-T E.2 12 International Mobile Subscriber Identity) can be used for communication from a Serving: Svstem MSC or VLR) to an HLR on

14、 the same. or a different, national SS7 network using: the IMSI of a roaming: mobile. It mav also be used for communication to anv network element that is identified bv an E.212 formatted address on the same. or a different national SS7 network. The following: encoding: can be used: Table 5.1.2 ANSI

15、 SS7 - E.212 Global Title Field Sub-field I Value Address Indicator SSN Indicator I1 Point Code Indicator loor1 Global Title Indicator 12 (00102) Routing Indicator lo National or International Indicator I 1 (National use) Subsystem Number I Include applicable value ifknown or zero Global Title Trans

16、lation Type 16 “CellularPCS 1ntenvorking”l M?W PCS P- . 99 Address Information I IMSI or other E.212 formatted address Global Title Translation on an E.164 number e.g:. Mobile Directory Number) can be used for communication to an HLR on the same. or a different. national SS7 network based on the Mob

17、ile Directory Number. The following: encoding: can be used Table 5.1.2d ANSI SS7 - MDN to HLR (E.1641 Global Title Field Sub-field Value I Address Indicator SSN Indicator 1 Point Code Indicator O or 1 I Global Title Indicator 2 (00102) I Routing Indicator O National or International Indicator 1 (Nat

18、ional use) I Subsystem Number Include applicable value ifknown or zero I Global Title Translation Type 14 (O0001 1102) “Mobile Subscriber Addressing” Address Information E.164 Mobile Directoy Number I Translation Type 9 may already be in use by networks implemented prior to the standard. II Stage-3 Signaling Protocol 10 TINEIA-41-D Chapter 5 Modifications