TIA EIA IS-839-2000 R-UIM Overview Operation and File Structure Support in TIA EIA-136-A《TIA EIA-136-A的R-UIM概述 操作 及文件结构支持》.pdf

1、 TIA/EIAINTERIM STANDARDR-UIM Overview, Operation, and FileStructure Support in TIA/EIA-136-ATIA/EIA/IS-839NOVEMBER 2000TELECOMMUNICATIONS INDUSTRY ASSOCIATIONThe Telecommunications Industry Associationrepresents the communications sector of TIA/EIA/IS-839NOTICETIA/EIA Engineering Standards and Publ

2、ications are designed to serve the public interest through eliminatingmisunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement ofproducts, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for hisparticular nee

3、d. Existence of such Standards and Publications shall not in any respect preclude any member ornonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications,nor shall the existence of such Standards and Publications preclude their voluntary use by thos

4、e other than TIA/EIAmembers, whether the standard is to be used either domestically or internationally.Standards and Publications are adopted by TIA/EIA in accordance with the American National Standards Institute(ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any pate

5、nt owner, nor does itassume any obligation whatever to parties adopting the Standard or Publication. TIA/EIA INTERIM STANDARDSTIA/EIA Interim Standards contain information deemed to be of technical value to the industry, and are published atthe request of the originating Committee without necessaril

6、y following the rigorous public review and resolution ofcomments which is a procedural part of the development of a TIA/EIA Standard.TIA/EIA Interim Standards should be reviewed on an annual basis by the formulating Committee and a decisionmade on whether to proceed to develop a TIA/EIA Standard on

7、this subject. TIA/EIA Interim Standards must becancelled by the Committee and removed from the TIA/EIA Standards Catalog before the end of their third year ofexistence.Publication of this TIA/EIA Interim Standard for trial use and comment has been approved by theTelecommunications Industry Associati

8、on. Distribution of this TIA/EIA Interim Standard for comment shall notcontinue beyond 36 months from the date of publication. It is expected that following this 36 month period, thisTIA/EIA Interim Standard, revised as necessary, will be submitted to the American National Standards Institute forapp

9、roval as an American National Standard. Suggestions for revision should be directed to: Standards Specification of the Subscriber Identity22Module - Mobile Equipment (SIM - ME) interface (GSM 11.11 version 7.3.0 Release 1998)2324GSM 11.12 Digital cellular telecommunications system (Phase 2); Specifi

10、cation of the 3 Volt Subscriber Identity25Module - Mobile Equipment (SIM - ME) interface (GSM 11.12 version 4.3.1Release 1998)2627GSM 11.14 Digital cellular telecommunications system (Phase 2+); Specification of the SIM Application Toolkit28for the Subscriber Identity Module - Mobile Equipment (SIM

11、- ME) interface (GSM 11.14 version297.3.1 Release 1998)3031GSM 11.17 Digital cellular telecommunications system (Phase 2+); Subscriber Identity Module (SIM)32conformance test specification (GSM 11.17 version 7.0.2 Release 1998)3334GSM 11.18 Digital cellular telecommunications system (Phase 2+); Spec

12、ification of the 1.8V Subscriber Identity35Module - Mobile Equipment (SIM - ME) interface (GSM 11.18 version 7.0.1 Release 1998)3637In addition to the existing GSM files operation in a TIA/EIA-136 environment requires additional commands and38responses and new Elementary Files (EFs) for storage of p

13、arameters for this environment which are specified in this39document. This standard specifies security-related procedures and commands, along with data and information40storage items that permit basic operation in the TIA/EIA-136 and TIA/EIA-41 environment.41TIA/EIA/IS-83922. List of SIM Files1Table

14、 1 is a general outline of the SIM files.231. All values are sized in Bytes unless otherwise noted.42. Default Values are specified when available and are intended to be guidelines only. In some cases, operators must5specify explicit parameter values as no logical default exists. In the case where t

15、he parameter values are necessary, valid6values and/or ranges are listed.73. Default and Parameter values are for general quick reference only and not intended to specify details. Refer to the8corresponding file for details.94. Default Values and Parameter Values are specified in Hexadecimal, unless

16、 otherwise noted.105. GSM-specific files are not included, but may be used by mobile stations supporting GSM and TIA/EIA-136.116. The directory file (DF) 5F40 and the elementary files (EF) under it are standardized by ETSI SMG9 and provided here12for information only.1314Table 1 Summary of SIM Files

17、15File Name File ID FileTypeAccess -ReadAccess -UpdateAccess -OTASize inBytesMandatoryor OptionalDefault Values (D)and/or ParameterValues (P) in NibblesNAM Information EIA/TIA-553/TIA/EIA-136MIN (MobileIdentificationNumber)3F00/7F20/5F40/4F88TR CHV1 CHV2 Yes 5 M D = 00 00 00 00 00 orD = 03 FF FF FF

18、FFACCOLC (AccessOverload Class)3F00/7F20/5F40/4F89TR CHV1 CHV2 Yes 1 M P = 00 to 0FSID (System ID) 3F00/7F20/5F40/4F80TR CHV1 CHV2 Yes 2 M P = 00 01 to 7F FFHome SOC and MCC(Home SystemOperator Code andMobile CountryCode)3F00/7F24/6FB0TR CHV1 ADM Yes 4 O P = SOC = 00 01 to 07FFOr 08 01 to 0F FFP = M

19、CC = 00 00 to3F FFD = 00 00 00 00Initial PagingChannel3F00/7F20/5F40/4F82TR CHV1 CHV2 Yes 2-4 M Specified by OperatorGroup ID 3F00/7F20/5F40/4F81TR CHV1 CHV2 Yes 1 M D = 0A for NorthAmericaP = 00 to 0FS-ESN (SIMElectronic SerialNumber)3F00/7F20/5F40/4F8BTR CHV1 Never No 4 M D = 00 00 00 00AMPS Usage

20、Indicators3F00/7F20/5F40/4F93TR CHV1 ADM Yes X =2O Specified by OperatorNAM Information TIA/EIA-136ANSI-136 Usage 3F00/7F24/ TR ALW ADM Yes X = M Specified by OperatorTIA/EIA/IS-8393File Name File ID FileTypeAccess -ReadAccess -UpdateAccess -OTASize inBytesMandatoryor OptionalDefault Values (D)and/o

21、r ParameterValues (P) in NibblesIndicators6FB12Alpha Tags 3F00/7F24/6FB2TR CHV1 CHV2 Yes 125 O D:Encoding Identifier =03 (Latin 1)Home_Alpha_Tag =HOMEPartner_Alpha_Tag =ROAMFavored_Alpha_Tag =ROAMNeutral_Alpha_Tag =ROAMAuthentication EIA/TIA-553/TIA/EIA-136A-Key Never UpdatebyalgorithmNo 8 M Specifi

22、ed by OperatorSSD (Shared SecretData)Never UpdatebyalgorithmNo 16 MCOUNTs-p(CallCount)3F00/7F20/5F40/4F83CY CHV1 ADM Yes 3 *N M D = 00 00 00Network Selection EIA/TIA-553/TIA/EIA-136Positive/Favored SIDList3F00/7F20/5F40/4F85TR CHV1 ADM Yes 2*N ONegative/ForbiddenSID List3F00/7F20/5F40/4F84TR CHV1 AD

23、M Yes 2*N ONetwork Selection EIA/TIA-553/TIA/EIA-136CSL (CooperativeSOC List)3F00/7F24/6FB3TR CHV1 ADM Yes 4*N OIRDB Version Table 3F00/7F24/6FB4TR CHV1 ADM Yes 18 M D:SOC = 00 00MCC = 00 00Versions = 00 00Partner SID List 3F00/7F24/6FB5TR CHV1 ADM Yes 2*N OPartner SOC List 3F00/7F24/6FB6TR CHV1 ADM

24、 Yes 2*N OFavored SOC List 3F00/7F24/6FB7TR CHV1 ADM Yes 2*N OForbidden SOC List 3F00/7F24/6FB8TR CHV1 ADM Yes 2*N OTIA/EIA/IS-8394File Name File ID FileTypeAccess -ReadAccess -UpdateAccess -OTASize inBytesMandatoryor OptionalDefault Values (D)and/or ParameterValues (P) in NibblesIRDB Parameter 3F00

25、/7F24/6FB9TR CHV1 ADM Yes 8 M D = 00 00 10 00 07 0600 00, whereIRDB Control DataWord = 00NUM_CELLULAR =00 10NUM_PCS = 00 07HISTORY_THRESHOLD = 06NUM_DHT = 00NUM_BHT = 00Band and Sub-BandPriority Order3F00/7F24/6FBATR CHV1 ADM Yes 4X19MNAM PSIDs/RSIDs(Private andResidential SystemIDs)3F00/7F24/6FBBTR

26、 CHV1 CHV1 Yes 1+102*NO Default value for N = 5Test RegistrationPSIDs/RSIDs(Private andResidential SystemIDs)3F00/7F24/6FBCTR CHV1 CHV1 Yes 1+102*NO Default value for N = 5Reg AcceptPSIDs/RSIDs(Private andResidential SystemIDs)3F00/7F24/6FBDTR CHV1 CHV1 Yes 1+102*NO Default value for N = 5Supplement

27、ary Features EIA/TIA-553/TIA/EIA-136SS Feature CodeTable3F00/7F24/6FBELF CHV1 ADM Yes 18 OTiming Information EIA/TIA-553/TIA/EIA-136Triggered ScanTimers3F00/7F24/6FBFTR CHV1 ADM Yes 5 M D = 00 00 00 00 04,whereRescan Count InitialValue = 00RESCAN_COUNT = 0000RESCAN_LOOP = 0004Registration Informatio

28、n EIA/TIA-553/TIA/EIA-136RegistrationThreshold3F00/7F20/5F40/4F8DTR CHV1 CHV1 Yes 3 O D = 00 00 00Additional SIM Files EIA/TIA-553/TIA/EIA-136GSM-ANSI-136 SIMPhase ID3F00/7F24/6FC0TR ALW ADM Yes 1 MTIA/EIA/IS-8395File Name File ID FileTypeAccess -ReadAccess -UpdateAccess -OTASize inBytesMandatoryor

29、OptionalDefault Values (D)and/or ParameterValues (P) in NibblesTeleservice ServerAddress Info3F00/7F24/6FC1LF CHV1 CHV1 Yes N * (Y+35)OBand History Table(BHT)3F00/7F24/6FC2TR CHV1 CHV1 Yes 3N ODCCH History Table(DHT)3F00/7F24/6FC3TR CHV1 CHV1 Yes 3N OAdditional UserRegistrationParameters3F00/7F24/6F

30、C4TR ALW CHV1 Yes (3+x) OUser Group ID Info 3F00/7F24/6FC5TR CHV1 CHV2 Yes (8N +1)M1TIA/EIA/IS-8396Figure 1 depicts the path for the SIM files. The directory file (DF) 5F40 and the elementary files (EF) under it are provided for1information2Figure 1 File identifiers and directory structures for GSM/

31、ANSI-136 SIM files3MF3F00DFGSMDFTIA/EIA-1367F20 7F24EFH-S0C-MCCEFANSI-UIEFA-TAGEFCSLEFIRDB-VEREFPART-SID6FB0 6FB1 6FB2 6FB3 6FB4 6FB5EFPART-SOCEFFAV-SOCEFFORB-SOCEFIRDB-PARAMEFBAND-PRIOEFNAM-PSID-RSID6FB6 6FB7 6FB8 6FB9 6FBA 6FBBEFTSTREG-PSID-RSIDEFREGACC-PSID-RSIDEFSSFCEFTS-TIMEREFGA-PHASEEFTSAI6FB

32、C 6FBD 6FBE 6FBF 6FC0 6FC1EFBHTEFDHTEFAURPEFUGIDI6FC2 6FC3 6FC4 6FC5DFEIA/TIA-5535F40EFSIDEFGPIEFIPCEFCOUNTEFNSIDEFPSID4F80 4F81 4F82 4F83 4F84 4F85EFMINEFACCOLCEFS-ESNEFREG-THRESHEFAMPS-UI4F88 4F89 4F8B 4F8D 4F934TIA/EIA/IS-83973. Coding of EFs for NAM and Operational Parameters1The default for the

33、 INVALIDATE and REHABILITATE access conditions for all EFs shall be ADM.2All quantities shown in the EF descriptions abide by the following rules unless otherwise specified:3 All unused bits of allocated parameters should be set by default to 04 All unused bytes in a series of values (eg., Partner,

34、Favored, or Forbidden SID List) should be set by default to FF5 All EFs marked with an * are standardized by ETSI SMG9 and are provided here for information only63.1 MOBILE IDENTIFICATION NUMBER (MIN)*7This file contains the Mobile Identification Number (MIN). The MIN is a 34-bit number used to addr

35、ess the mobile station8across the EIA/TIA-553, TIA/EIA-136and other TIA/EIA-41 based air interfaces. See TIA/EIA-136-005 for further details9on MIN.1011Identifier: 4F88 File Type: Transparent MandatoryFile size: 5 bytes Update Activity: LowAccess Conditions:READ CHV1UPDATE CHV2OTA ALLOWEDBytes Descr

36、iption M/O Length1 - 2 MIN2 M 2 bytes3 - 5 MIN1 M 3 bytes12The MIN field is coded as follows:13 6 most significant bits are unused14 next 10 bits are MIN215 24 least significant bits are MIN116 Default MIN is 00 00 00 00 00 or 03 FF FF FF FF. In either case the mobile station shall interpret this as

37、 MIN invalid17and shall not transmit this value over the air interface.1819TIA/EIA/IS-83983.2 ACCESS OVERLOAD CLASS (ACCOLC)*1This file contains the Access Overload Class (ACCOLC). The ACCOLC is a 4-bit indicator used to identify which overload2class field controls the access attempts by the mobile

38、station. See TIA/EIA-136-140 for further details on ACCOLC.34Identifier: 4F89 File Type: Transparent MandatoryFile size: 1 bytes Update Activity: LowAccess Conditions:READ CHV1UPDATE CHV2OTA ALLOWEDBytes Description M/O Length1 ACCOLC(possible values from 00 to 0F)M 1 byte5Byte 1:6b8 b7 b6 B5 b4 b3

39、b2 b1ACCOLC07TIA/EIA/IS-83993.3 SYSTEM ID OF HOME SYSTEM (SID)*1This file contains the system identity of the home system. The SID is a 15-bit number that uniquely identifies an EIA/TIA-2553, TIA/EIA-136 or other TIA/EIA-41 based systems. See TIA/EIA-136-005 for further details on Home SID.34Identif

40、ier: 4F80 File Type: Transparent MandatoryFile size: 2 bytes Update Activity: LowAccess Conditions:READ CHV1UPDATE CHV2OTA ALLOWEDBytes Description M/O Length1-2 System ID of Home System (SID)( Most significant bit = 0)M 2 bytes5Coding of the System ID of Home System field (2-byte coding)67Byte 1:8b

41、8 b7 b6 B5 b4 b3 b2 b1:MS bit of System ID of Home System09Byte 2:10b8 b7 b6 B5 b4 b3 b2 b1LS bit of System ID of Home System:11TIA/EIA/IS-839103.4 HOME SYSTEM OPERATOR CODE (SOC) AND MOBILE COUNTRY1CODE (MCC)2This file contains information to identify the home system operator code and the mobile co

42、untry code. The SOC is a 12-bit3number that uniquely identifies an TIA/EIA-136 service provider. See TIA/EIA-136-020 for SOC assignments and TIA/EIA-4136-005 for further details on SOC and MCC.56Identifier: 6FB0 File Type: Transparent OptionalFile size: 4 bytes Update Activity: LowAccess Conditions:

43、READ CHV1UPDATE ADMOTA ALLOWEDBytes Description M/O Length1 - 2 System Operator Code (SOC) M 2 bytes3-4 Mobile Country Code (MCC) M 2 bytes7 Values for the SOC range from 00 01 to 0F FF8 The 4 most significant bits of the SOC = 09 MCC is specified as in ITU-T Recommendation E.21210 The 3 decimal dig

44、its of the MCC are expressed as the corresponding decimal number (000 = d id jd k = 999) coded11in binary bits using a normal decimal to binary conversion (0 to 999)12 The 6 most significant bits of the MCC = 013 If this file is not present, the mobile station shall interpret the Home SOC and MCC (i

45、n ANSI-136 mode) to be 00 0014TIA/EIA/IS-839113.5 INITIAL PAGING CHANNEL *1The Initial (First) Paging Channel contains two 11-bit first paging channels (FIRSTCHP p-pri and FIRSTCHP p-sec) used to2identify the channel number of the first paging channel when the mobile station is home. See TIA/EIA-136

46、-140 for further3details on First (Initial) Paging Channel.45Identifier: 4F82 File Type: Transparent MandatoryFile size: 2-4 bytes Update Activity: LowAccess Conditions:READ CHV1UPDATE CHV2OTA ALLOWEDBytes Description M/O Length1 - 2 FIRSTCHPpri (Initial Paging Channel) M 2 bytes3 4 FIRSTCHPp-sec O

47、2 bytes6 In the absence of the FIRSTCHPp-sec, the mobile station shall default to 708 (decimal) if the primary channel = 3337(decimal) or 737 (decimal) if the primary channel = 334 (decimal)8 A file size of 4 bytes may not be backwards compatible with the current dual-mode mobile equipment9TIA/EIA/I

48、S-839123.6 GROUP ID *1This file defines a subset of the most significant bits of the system identification (SID) that is used to identify a group of2cellular systems for local control purposes. If the local control option is enabled within the mobile station and the bits of the3home system identification that comprise the group identification match the corresponding bits of the SID read by the mobile4station over the air, then the Local Control status must be enabled. Otherwise, the Local Control status must be disabled.5Refer to TIA/EIA-136-005 and E