1、 JOINT INTERIM STANDARD GMR-1 Series 01 (01.004) General Specifications Sub-Abbreviations and Acronyms IS-J-STD-782-Series 1 IS-J-STD-782-Series 1 NOVEMBER 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance
2、 EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE NOTICE FROM THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeabilit
3、y and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling product
4、s not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/E
5、IA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. Note: The users attention is called to the poss
6、ibility that compliance with this document may require use of one or more inventions covered by patent rights. By publication of this standard, Interim Standard, or TSB, no position is taken with respect to the validity of those claims or of any patent rights in connection therewith. The patent hold
7、er(s) so far identified have, however, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. Details may be obtained from the standards developer. TIA/EIA AND JOINT INTERIM STANDAR
8、DS Joint Interim Standards contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of an Americ
9、an National Standard (ANS). Interim Standards should be reviewed on a periodic basis by the formulating Committee and a decision made on whether to proceed to develop a TIA/EIA Standard on this subject. Interim Standards must be upgraded or cancelled by the Committee before the end of their third ye
10、ar of existence. Publication of this Joint Interim Standard for trial use and comment has been approved by the Telecommunications Industry Association. Distribution of this Joint Interim Standard for comment shall not continue beyond 36 months from the date of publication. It is expected that follow
11、ing this 36 month period, this Joint Interim Standard, revised as necessary, will be submitted to the American National Standards Institute for approval as an American National Standard. Suggestions for revision should be directed to: Standards & Technology Department, Telecommunications Industry As
12、sociation, 2500 Wilson Boulevard, Arlington, VA 22201 U.S.A. EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE (ETSI) ETSI (the European Telecommunications Standards Institute) is a non-profit making organization whose mission is to produce the telecommunications standards that will be used for decade
13、s to come throughout Europe and beyond. Based in Sophia Antipolis (France), ETSI unites 789 members from 52 countries inside and outside Europe, and represents manufacturers, network operators, administrations, service providers, research bodies and users. The Institutes work programme is determined
14、 by its members, who are also responsible for approving its deliverables. As a result, ETSIs activities are maintained in close alignment with the market needs expressed by its members. ETSI plays a major role in developing a wide range of standards and other technical documentation as Europes contr
15、ibution to world-wide standardization in telecommunications, broadcasting and information technology. ETSIs prime objective is to support global harmonization by providing a forum in which all the key players can contribute actively. ETSI is officially recognized by the European Commission and the E
16、FTA secretariat. (From Project No. 3-4387-S1, formulated under the cognizance of the TIA TR-34.1 Subcommittee on communications & Interoperability.) Published by g211TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards & Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE:
17、 Please refer to current Catalog of EIA (ELECTRONIC INDUSTRIES ALLIANCE) STANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY T
18、he document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and claims copyright to the document pursuant to licenses and permission granted b
19、y the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. TIAs function is to a
20、dminister the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE OF CONTENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RI
21、GHTS (“IPR”), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED TO TIAS ATTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, A
22、LL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE
23、ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS
24、OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCI
25、DENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOIN
26、G NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without permission. Organizations may obtain pe
27、rmission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 U.S.A. or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 TIA/EIA/IS-782.01004iConten
28、tsContents.iIntroduction .ii1 Scope 12 References 13 Abbreviations and acronyms .1History26TIA/EIA/IS-782.01004iiIntroductionGMR stands for GEO (Geostationary Earth Orbit) Mobile Radio interface, which is used for mobile satellite services (MSS)utilising geostationary satellite(s). GMR is derived fr
29、om the terrestrial digital cellular standard GSM and supports access toGSM core networks.Due to the differences between terrestrial and satellite channels, some modifications to the GSM standard are necessary.Some GSM specifications are directly applicable, whereas others are applicable with modific
30、ations. Similarly, some GSMspecifications do not apply, while some GMR specifications have no corresponding GSM specification.Since GMR is derived from GSM, the organisation of the GMR specifications closely follows that of GSM. The GMRnumbers have been designed to correspond to the GSM numbering sy
31、stem. All GMR specifications are allocated a uniqueGMR number as follows:GMR-n xx.zyywhere :xx.0yy (z=0) is used for GMR specifications that have a corresponding GSM specification. In this case, the numbers xx andyy correspond to the GSM numbering scheme.xx.2yy (z=2) is used for GMR specifications t
32、hat do not correspond to a GSM specification. In this case, only the number xxcorresponds to the GSM numbering scheme and the number yy is allocated by GMR.n denotes the first (n=1) or second (n=2) family of GMR specifications.A GMR system is defined by the combination of a family of GMR specificati
33、ons and GSM specifications as follows: If a GMR specification exists it takes precedence over the corresponding GSM specification (if any). This precedencerule applies to any references in the corresponding GSM specifications.Note: Any references to GSM specifications within the GMR specifications a
34、re not subject to this precedence rule.For example, a GMR specification may contain specific references to the corresponding GSM specification. If a GMR specification does not exist, the corresponding GSM specification may or may not apply. The applicabilityof the GSM specifications is defined in GM
35、R-n 01.201. TIA/EIA/IS-782.0100411 ScopeThis document describes abbreviations and acronyms to be used throughout the GMR-1 specifications. All abbreviationsare presented in the singular, but are equally applicable to the plural.2 ReferencesThis document has no references.3 Abbreviations and acronyms
36、AA3 Authentication algorithm A3A38 A single algorithm performing the functions of A3 & A8A5/1 Encryption algorithm A5/1A5/2 Encryption algorithm A5/2A5-GMR-1 Signaling data AND user data encryption algorithmA5/X Encryption algorithm A5/0-7A8 ciphering key generating algorithm A8 session key generati
37、ng algorithm, used in security schemesAB Access BurstABM Asynchronous Balance Mode Asymmetric Balance ModeAC Access Class (C0 to C15) Application ContextACC Automatic Congestion Control ACCeptACCH Associated Control CHannelACCH/FA Associated Control CHannel/Full AllocationACK Acknowledgment ACKnowle
38、dgeACM Accumulated Call Meter Address Complete MessageACU Antenna Combining UnitADC Administration center Analog to Digital ConverterTIA/EIA/IS-782.010042AAND Abbreviated Dialing NumberADPCM Adaptive Differential Pulse Code ModulationAE Application EntityAEC Acoustic Echo ControlAEF Additional Eleme
39、ntary FunctionsAGCH Access Grant ChannelAi Action indicatorANM ANswer MessageAoC Advice of ChargeAOC Advanced Operation CenterAoCC Advice of Charge Charging supplementary serviceAoCI Advice of Charge Information supplementary serviceASE Application Service ElementASN.1 Abstract Syntax Notation OneAR
40、FCN Absolute Radio Frequency Channel NumberARQ Automatic ReQuest for retransmissionASD Accelerated Special DensityASFC Alerting Signaling Failure CounterAT Access TerminalAta Access terminal, country aAtb Access terminal, country bAtc Access terminal, country cAT-BSS Access Terminal-Base Station Sub
41、systemAT-GSS Access Terminal-Gateway Station SubsystemATI Any Time InterrogationAT(o) Access Terminal, Originating (TtT)AT(t) Access Terminal, Terminating (TtT)ATT (flag) ATTachAU Access UnitAuC Authentication CenterAUT(H) AUThenticationBTIA/EIA/IS-782.010043BBA BCCH AllocationBACH Broadcasting Aler
42、t CHannel Broadcast Alerting CHannel Basic Alerting ChannelBAIC Barring of All Incoming Calls supplementary serviceBAOC Barring of All Outgoing Calls supplementary serviceBCC Base transceiver station (BTS) Color CodeBCCH Broadcast Control ChannelBCD Binary Coded DecimalBCF Base station Control Funct
43、ionBCIE Bearer Capability Information ElementBCS Binary Coded SignalingBER Bit Error RateBFI Bad Frame IndicationBI all Barring of Incoming call supplementary servicesBIC-Roam Barring of Incoming Calls when Roaming outside thehome PLMN Country supplementary serviceBIIC Barring of Incoming Internatio
44、nal CallBm Full-rate traffic channelBN Bit NumberBO All Barring of Outgoing call supplementary servicesBOIC Barring of Outgoing International Calls supplementaryserviceBOIC-exHC Barring of Outgoing International Calls except thosedirected to the Home PLMN Country supplementaryserviceBS Bearer Servic
45、es Base Station Basic Service (group)BSC Base Station ControllerBSG Basic Service GroupBSIC Base Transceiver Station Identity CodeBSIC-NCELL BSIC of an adjacent cellBSS Base Station SystemBSSAP Base Station System Application PartBSSMAP Base Station Subsystem Management Application PartTIA/EIA/IS-78
46、2.010044BBSSOMAP Base Station System Operation and MaintenanceApplication PartBTS Base Transceiver StationCC ConditionalCA Cell AllocationCAI Common Air Interface Charge Advice InformationCB Call BarringCBC Cell Broadcast CenterCBCH Cell Broadcast Channel Call Broadcast ChannelCBMI Cell Broadcast Me
47、ssage IdentifierCC Country Code Circuit-switched Calls Call ControlCC/NDC Country Code Network Destination CodeCCBS Completion of Calls to Busy Subscriber supplementaryserviceCCCH Common Control ChannelCCF Conditional Call ForwardingCCH Control ChannelCCITT (ITU) Consultative Committee for Internati
48、onal Telegraphyand Telephony (F Comit Consultatif InternationaleTlphonique et Tlgraphique) Use ITUCCM Current Call MeterCCP Capability/Configuration ParameterCCPE Control Channel Protocol EntityCCS7 CCITT Signalling System No. 7Cct CircuitCDR Call Data RecordCDUR Chargeable DURationCED CallED statio
49、n identifierCEIR Central Equipment Identity RegisterTIA/EIA/IS-782.010045CCEND END of charge pointCEPT Confrence des administrations Europennes desPostes at TelecommunicationsCF Conversion Facility all Call Forwarding servicesCFB Call Forwarding on mobile subscriber Busysupplementary serviceCFNRc Call Forwarding on mobile subscriber Not Reachablesupplementary serviceCFNRee Call Forwarding on mobile subscriber Not usableCFNRep Call Forwarding on mobile subscriber Not usableCFNRy Call Forward
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1