TIA EIA-136-123-I-2014 TDMA Third Generation Wireless Digital Control Channel Layer 3 (ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf

1、 ANSI/TIA/EIA-136-123-I-2014 APPROVED: AUGUST 27, 2014 WITHDRAWN: JUNE 12, 2015 TIA/EIA-136-123-I (Revision of TIA/EIA-136-123-H) September 2014TDMA Third Generation Wireless Digital Control Channel Layer 3 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest t

2、hrough eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publicat

3、ions shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or inte

4、rnationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publicat

5、ion. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitation

6、s before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.123-I-WD, formulated under the cognizance of the TIA TR-45 Mobile (b) ther

7、e is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the

8、use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement

9、from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions,

10、which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the

11、Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whethe

12、r such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative

13、 Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other

14、 SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any

15、claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINF

16、RINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFE

17、CTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY A

18、ND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY

19、 OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA/EIA-136-123-I-2014 vContents 1. Foreword This foreword is not part of TIA/EIA-136-123 ii 2. Scope 1 3. G

20、eneral 2 4. Mobile Station State Diagram . 3 5. Mobile Station State Descriptions . 4 5.1 Null State (D1) . 4 5.2 Control Channel Scanning and Locking State (D2) . 4 5.3 DCCH Camping State (D3) . 5 5.4 Registration Proceeding (D4) 13 5.5 Origination Proceeding (D5) . 15 5.6 Waiting for Order (D6) 19

21、 5.7 Terminated Point-to-Point Teleservice Proceeding (D7) . 22 5.8 SSD Update Proceeding (D8) 24 5.9 Originated Point-to-Point Teleservice Proceeding (D9) 26 5.10 User Group Alerting (D10) 28 6. Procedures 30 6.1 DCCH Scanning and Locking . 30 6.1.1 Overview . 30 6.1.2 Definitions . 31 6.1.2.1 Acce

22、ptable and Unacceptable Service Provider (SP) Categories . 31 6.1.2.2 Historic Search Database (HSDB) . 31 6.1.2.3 Intelligent Roaming (IR) 32 6.1.2.4 IR Control Data Word . 32 6.1.2.5 Intelligent Roaming Database (IRDB) . 34 6.1.2.6 Minimum Received Signal Strength when Looking for a DCCH 35 6.1.2.

23、7 Probability Block . 36 6.1.2.8 Service Provider (SP) 36 6.1.2.9 Sub-band 37 6.1.2.10 Service Provider Determination Indicator (SPDI) . 37 6.1.3 Digital Control Channel Assignments . 37 6.1.3.1 Regulatory Configuration Identifier = 0 38 6.1.3.2 Regulatory Configuration Identifier = 1 40 6.1.3.3 Reg

24、ulatory Configuration Identifier = 2 44 6.1.3.4 Regulatory Configuration Data Identifier = 3 44 6.1.4 Means to Identify a DCCH 44 6.1.5 Service Provider Determination from the SID and SOC . 45 6.1.5.1 Service Provider Determination Using PLMN 45 6.1.6 Intelligent Roaming Scanning Procedures 46 6.1.6

25、.1 Call Release . 46 6.1.6.2 Intelligent Roaming Restart Procedure 47 6.1.6.3 Power-up Scan . 47 6.1.6.4 Wide-band Scan . 51 ANSI/TIA/EIA-136-123-I-2014 vi 6.1.6.5 Triggered Scans 51 6.1.6.5.1 Conditions Under which Triggered Scans are Disallowed 51 6.1.6.5.2 Initiating a Triggered Scan . 52 6.1.6.5

26、.2.1 Triggered Scanning in the 800 MHz Bands Only . 54 6.1.6.5.3 Triggered Partial Scan 54 6.1.6.5.4 Triggered Wide-band Scan . 55 6.1.6.5.5 Additional Triggered Scan Requirements . 55 6.1.6.6 Band Scanning Procedures . 56 6.1.6.6.1 Scanning in the 1900 MHz Bands 56 6.1.6.6.1.1 Sub-Band Search . 56

27、6.1.6.6.1.2 1900 MHz (and Partial 800 MHz) Band Scan Algorithm . 57 6.1.6.6.2 Scanning in the 800 MHz Bands 60 6.1.6.7 Emergency Call Procedure . 63 6.1.6.8 Analog Fax and Data Service . 63 6.1.6.9 GSM Scanning Procedures . 64 6.2 Control Channel Selection . 64 6.2.1 Signal Strength Aspects Determin

28、ation . 66 6.2.2 Basic DCCH Service Determination . 66 6.2.3 Packet Data Service Determination . 67 6.2.3.1 GPRS-136 Packet Data Service Determination 67 6.2.3.2 EGPRS-136 Packet Data Service Determination 68 6.2.4 DCCH Service Determination . 69 6.2.5 Signal Strength Measurements 70 6.3 Control Cha

29、nnel Reselection . 71 6.3.1 Control Channel Locking 71 6.3.2 Optional Enhancements . 72 6.3.3 Signal Strength Measurement and Processing . 73 6.3.4 Reselection Criteria . 73 6.3.4.1 Reselection Trigger Conditions (RTC) . 74 6.3.4.2 Candidate Eligibility Filtering (CEF) . 75 6.3.4.3 Candidate Reselec

30、tion Rules 80 6.3.4.3.1 CAND_1 Determination . 81 6.3.4.3.2 CAND_1 Examination 82 6.3.4.3.3 Suitable CAND_1 Found 84 6.3.4.3.4 Suitable CAND_1 Not Found . 85 6.4 Termination 86 6.5 Origination . 90 6.6 Originated Point-to-Point Teleservice 91 6.7 Registration 92 6.8 Registration Update . 95 6.9 Peri

31、odic Registration Determination 95 6.10 Registration Success 96 6.11 Registration Reject . 97 6.12 Subaddressing Procedures 100 6.12.1 BMI to Mobile Station Subaddressing . 100 6.12.2 Mobile Station to BMI Subaddressing . 100 ANSI/TIA/EIA-136-123-I-2014 vii6.13 Non-Public System Registration 101 6.1

32、4 Non-Public Reselection Based on System Priority 102 6.14.1 Autonomous System Reselection 102 6.14.2 User Initiated System Reselection . 102 6.15 User Group Addressing Procedures . 102 6.15.1 Local User Group Addressing . 103 6.15.2 SOC User Group Addressing 103 6.15.3 National User Group Addressin

33、g 103 6.15.4 International User Group Addressing 103 6.16 Mobile Assisted Channel Allocation . 103 6.16.1 General 103 6.16.2 MACA Broadcast Information 104 6.16.3 MACA Report Information Contents 105 6.16.4 Procedures . 105 6.16.4.1 LTM Measurements 105 6.16.4.1.1 LTM Measurement Units . 105 6.16.4.

34、1.2 LTM Measurement Time Interval 106 6.16.4.1.3 LTM Measurement Techniques . 106 6.16.4.1.3.1 BER and WER Measurement Techniques 106 6.16.4.1.3.2 LT_RSS Measurement Technique . 107 6.16.4.2 STM Measurements . 107 6.16.4.2.1 STM Measurement Units . 107 6.16.4.2.2 STM Measurement Time Interval 108 6.

35、16.4.2.3 STM Measurement Techniques . 108 6.17 BCCH Update 109 6.18 Non-Public Mode Search . 111 6.18.1 New PSID/RSID Search 112 6.18.2 Manual System Search 113 6.19 Test Registration 116 6.19.1 Alphanumeric Updating 116 6.20 PSP and POF Determination . 116 7. Layer 3 Message Set . 119 7.1 BCCH Mess

36、ages 121 7.1.1 F-BCCH Messages 122 7.1.1.1 Mandatory F-BCCH Messages 122 7.1.1.1.1 DCCH Structure . 122 7.1.1.1.2 Access Parameters . 123 7.1.1.1.3 Control Channel Selection Parameters . 125 7.1.1.1.4 Registration Parameters . 126 7.1.1.1.5 System Identity 127 7.1.1.2 Optional F-BCCH Messages . 128

37、7.1.1.2.1 BSMC Message Delivery 128 7.1.1.2.2 Beacon PCCH Parameters . 128 7.1.1.2.3 EGPRS-136 Parameters . 129 7.1.1.2.4 Mobile Assisted Channel Allocation . 129 ANSI/TIA/EIA-136-123-I-2014 viii 7.1.1.2.5 Overload Class 130 7.1.1.2.6 Service Menu 130 7.1.1.2.7 SOC / BSMC Identification 132 7.1.1.2.

38、8 SOC Message Delivery . 132 7.1.1.2.9 Mobile Assisted Channel Allocation (Multi Hyperband) . 133 7.1.2 E-BCCH Messages 134 7.1.2.1 Mandatory E-BCCH Messages 134 7.1.2.1.1 Neighbor Cell . 134 7.1.2.1.2 Regulatory Configuration . 135 7.1.2.2 Optional E-BCCH Messages 135 7.1.2.2.1 BSMC Message Deliver

39、y . 135 7.1.2.2.2 EGPRS-136 Non-public System Information . 136 7.1.2.2.3 Emergency Information Broadcast . 136 7.1.2.2.4 Mobile Assisted Channel Allocation 136 7.1.2.2.5 Service Menu 136 7.1.2.2.6 SOC / BSMC Identification 136 7.1.2.2.7 SOC Message Delivery . 137 7.1.2.2.8 Time and Date 137 7.1.2.2

40、.9 Neighbor Service Info . 137 7.1.2.2.10 Alternate RCI Info 138 7.1.2.2.11 Neighbor Cell (Multi Hyperband) 138 7.1.2.2.12 Neighbor Service Info (Multi Hyperband) 140 7.1.2.2.13 Mobile Assisted Channel Allocation (Multi Hyperband) . 140 7.1.2.2.14 SAMPS Parameters 141 7.1.3 S-BCCH Messages 141 7.2 R

41、eserved Slots Messages . 141 7.3 SPACH Messages 142 7.3.1 Analog Voice Channel Designation 143 7.3.2 Audit Order 143 7.3.3 Base Station Challenge Order Confirmation . 144 7.3.4 BSMC Message Delivery 144 7.3.5 Capability Request . 145 7.3.6 Digital Traffic Channel Designation 146 7.3.7 Directed Retry

42、 148 7.3.8 Message Waiting . 148 7.3.9 Page . 149 7.3.10 Parameter Update 150 7.3.11 R-DATA 151 7.3.12 R-DATA ACCEPT 152 7.3.13 R-DATA REJECT . 153 7.3.14 Registration Accept . 154 7.3.15 Registration Reject 155 7.3.16 Release . 156 7.3.17 Reorder/Intercept . 157 7.3.18 SOC Message Delivery 157 ANSI

43、/TIA/EIA-136-123-I-2014 ix7.3.19 SPACH Notification 158 7.3.20 SSD Update Order . 159 7.3.21 Test Registration Response . 159 7.3.22 Unique Challenge Order 160 7.3.23 User Alert 160 7.3.24 Queue Disconnect Ack 161 7.3.25 Queue Update 162 7.4 RACH Messages 163 7.4.1 Audit Confirmation . 164 7.4.2 Aut

44、hentication . 164 7.4.3 Base Station Challenge Order . 165 7.4.4 BSMC Message Delivery 165 7.4.5 Capability Report 166 7.4.6 MACA Report . 169 7.4.7 Origination 170 7.4.8 Page Response . 173 7.4.9 R-DATA 175 7.4.10 R-DATA ACCEPT 176 7.4.11 R-DATA REJECT . 176 7.4.12 Registration . 177 7.4.13 Serial

45、Number . 178 7.4.14 SOC Message Delivery 179 7.4.15 SPACH Confirmation 179 7.4.16 SSD Update Order Confirmation 180 7.4.17 Test Registration . 180 7.4.18 Unique Challenge Order Confirmation . 181 7.4.19 Queue Disconnect 181 8. Information Element Description . 182 8.1 800 MHz Analog Speech Support .

46、 182 8.2 Access Burst Size 182 8.3 ADVICE Support 183 8.4 Additional DCCH Information 183 8.5 Address Info 184 8.6 Alphanumeric PSID/RSID List . 186 8.7 Alphanumeric System ID 187 8.8 ALT_SOC_LIST . 187 8.9 ALT_SOC_Support . 188 8.10 Async Data Support . 189 8.11 ATS 189 8.12 AUTH 189 8.13 AUTH Map

47、190 8.14 AUTHBS . 190 8.15 AUTHR . 190 ANSI/TIA/EIA-136-123-I-2014 x 8.16 AUTHU . 190 8.17 Bandwidth 191 8.18 BSMC 191 8.19 BSMC Support . 191 8.20 C-Number 192 8.21 C-Number Request . 192 8.22 Called Party 192 8.23 Called Party Number 193 8.24 Called Party Subaddress. 193 8.25 Calling Party Number

48、193 8.26 Calling Party Number Presentation Indicator 193 8.27 Calling Party Subaddress . 194 8.28 Capability Request . 194 8.29 Cause 195 8.30 Cause Extension . 195 8.31 CBN_High . 196 8.32 Cell Barred . 196 8.33 CELLTYPE . 197 8.34 CELL_SYNC . 197 8.35 CHAN 197 8.36 Complete Model Number. 197 8.37

49、Confirmed Message Type 197 8.38 COUNT 198 8.39 Custom Control 198 8.40 DADS Support . 198 8.41 DADS Support Info . 198 8.42 Data Mode 198 8.43 Data Privacy Mode Map 200 8.44 DCCH Identity Information . 200 8.45 Debug Display Allowed . 200 8.46 DELAY 201 8.47 Delay Interval Compensation Mode (DIC) 201 8.48 Delta Time . 201 8.49 DEREG 202 8.50 Dial String 202 8.51 Directed Retry Channel 202 8.52 Directory Address 202 8.53 Directory Subaddress . 202 8.54 Display . 203 8.55 DMAC . 203 8.56 Double Rate DTC Support . 203 8.57 Downlink Power Control Info 203 8.58 DTX Support 204 8.59 DVCC 204 ANS