TIA J-STD-034-1997 Wireless Enhanced Emergency Services《(试用标准)无线增强紧急服务》.pdf

1、 J-STD-034 December 1997 Wireless Enhanced Emergency Services J-STD-034-1997 APPROVED: DECEMBER 1, 1997 REAFFIRMED: SEPTEMBER 28, 2012 JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Standards Institute (ANSI) patent policy. By such action, the T

2、elecommunications Industry Association (TIA) or the Alliance for Telecommunications Industry Solutions (ATIS) does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all s

3、afety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This standard was developed under

4、Project No. 3-3581-RF1, formulated under the cognizance of the TIA TR-45.8 Subcommittee on Core Networks and ATIS Wireless Technologies and Systems Committee (WTSC). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology Telephone (703)907-7700; Fax: (703)907-7727 or by email to receptionti

5、aonline.org. This document was coordinated between ATIS and TIA. A Word from TIA: TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstanding between manufacturers and purchasers, facilitating interchangeability and improvement of product

6、s, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his/her particular need. Existence of such Standards and Publications shall not be in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such

7、Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. TIA Documents contain information deemed to be of technical value to the ind

8、ustry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard (ANS). Further details of the development process are available in th

9、e TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm A Word from ATIS: As a leading technology and solutions development organization, ATIS brings together the top global ICT companies to advance the industrys most-pressing business priorities. Through AT

10、IS committees and forums, nearly 200 companies address cloud services, device solutions, emergency services, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more. These priorities follow a fast-track development lifecyclefrom desig

11、n and innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North American Organizational Partner for the 3rd Generati

12、on Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, visit www.atis.org.

13、 NOTICE FROM PATENT HOLDERS The users attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connec

14、tion therewith. The patent holder has, however, filed a statement of willingness to grant a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunications Industry Association, Allian

15、ce for Telecommunications Industry Solutions or the American National Standards Institute. Copyright Telecommunications Industry Association 2013 Copyright Alliance for Telecommunications Industry Solutions 2013 All rights reserved This document is subject to change. NOTICE OF COPYRIGHT This documen

16、t is issued under a joint copyright by the Telecommunications Industry Association and the Alliance for Telecommunications Industry Solutions, and may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited w

17、ithout copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organ

18、izations may obtain permission to reproduce a limited number of copies by entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (303) 397-7956 OR ATIS Document

19、Center: http:/www.atis.org/docstore/default.aspx Alliance for Telecommunications Industry Solutions 1200 G Street, NW Suite 500 Washington, DC 20005 (202) 628-6380 NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engine

20、ering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). In addition, the Document was balloted by ATIS Wireless Technologies and Systems Committee and ATIS Packet Technologies and Systems Committee. TIA is not the author of the Document contents, but publishes

21、and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of w

22、hich are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. The ATIS Wireless Technologies and Systems Committee is expected to conduct its affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/legal/op.asp TIAs function is to admin

23、ister the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Forums, is to administer the process ac

24、cording to its Operating Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATIS disclaim any undertaking to perfo

25、rm any duty owed to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or in any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no assurance th

26、at the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual

27、property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement fr

28、om the holder thereof is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor ATIS takes any position with refer

29、ence to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA or ATIS opine or judge wheth

30、er proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not enforce or monitor compliance with

31、the contents of the Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONC

32、ERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKE N

33、O REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. NEITHER TIA NOR ATIS SHALL BE

34、LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE)

35、, WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE

36、PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS.1 2 3 4 5 6 7 a 9 10 11 12 13 14 15 16 17 18 19 2l 2l P 23 a a a6 27 a3 29 3 3l 3? 3 34 35 z6 3 38 38 a) 41 42 43 44 45 46 4 48 49 50 51 9 53 54 55 56 $I SB 99 W - STD-EIA J-STD-034-ENGL 2777 W 3234b00 0588032 O22 J-STD-034.1 WIRELESS ENHANCED EMERGENCY SERV

37、ICES: FUNCTIONAL OVERVIEW CONTENTS LIST OF FIGURES . . . . . ._ II LIST OF TABLES ii . FOREWORD . . . . 111 REVISION HISTORY iv 1. INTRODUCTION. . . . . ._. . . _. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ._. . . . . . . . . . _. . . . . . . . . , . . 1 1.1 OBJECTIVE . . 1 1.2 SCOPE

38、 . 1 1.3 ORGANIZATION . 1 2. REFERENCES 2 3. FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . .3 3.1 DEFIMTZONS . 3 3.2 DOCUMENTATION CONVENTIONS . . .

39、 . . , . 3 4. SYMBOLS AND ABBREVLATIONS . 4 1 Contents 1 2 LIST OF FIGURES 3 4 None 5 6 7 8 LIST OF TABLES 9 10 11 None List of Figures 12 13 14 15 16 17 18 19 P 21 P P 24 a 26 27 28 0 3D 31 P 33 34 35 36 37 38 33 40 41 Q 43 44 6 46 47 43 43 50 51 9 53 54 5 96 57 56 93 a 1 2 3 4 5 6 7 8 9 10 11 12 1

40、3 14 15 16 17 18 19 a, 21 z P 24 a a6 27 aB 29 J) n 8 33 34 36 36 37 38 33 a) 41 a? 43 44 45 46 47 48 49 50 51 P 53 54 56 56 57 59 58 m STD-EIA J-STD-034-ENGL 1777 D 3234b00 0588034 7T5 D J-STD-034.1 FOREWORD This Foreword is not part of this Interim Standard. This is one of a series of recuamendati

41、ons titled “WIRELESS ENHANCED EMERGENCY SERVICES” which provides a solution for the limited capabilities of Wireless Enhanced Emergency Services. These capabilities include: subscriber identification callback reconnect provision of base station, cell site or sector identification information The rec

42、ommendations included in this series are: J-STD-034.1, J-STD-034.2, J-STD-034.3, J-STD-034.4, J-STD-034.5, J-STD-034.6, J-STD-034.7, J-STD-034.8, J-STD-034.9, Wireless Enhanced Emergency Services: Functional Overview Wireless Enhanced Emergency Services: PSAP Perspective Wireless Enhanced Emergency

43、Services: Emergency Services Stage 2 Wireless Enhanced Emergency Services: TZAEZA-41 Intersystem Handoff Modifications Wireless Enhanced Emergency Services: TlAEZA-41 Automatic Roaming Modifications Wireless Enhanced Emergency Services: ANSI J-STD-O23 Stage 2 Modifications Wireless Enhanced Emergenc

44、y Services: TIA/EIMS-93 Modifications Wireless Enhanced Emergency Services: TIAEZA-41 Stage 3 Modifications Wireless Enhanced Emergency Services: ANSI J-STD-O24 Modifications iii Foreword REVISION HISTORY Revision O Date Remarks October 1997 Initial Publication NOTE The unique numbering system assig

45、ned to these documents is intended to reflect their hierarchical structure. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 P 21 P P 24 0 aj 27 a) 29 3D 31 1 33 3 5 36 37 38 38 a) 41 42 43 44 45 a 47 e a3 9D 51 9 5 54 56 56 57 58 53 Q Revision History iv 1 2 3 4 5 6 7 8 9 10 11 12 u 14 15 16 n 18 19

46、 al 21 P P 24 a nj a 2B 29 30 3l 8 33 24 s 35 37 38 33 4) 41 Q 43 44 4s 46 47 48 49 5D 51 52 53 sd 55 56 n s 99 BD STD.EIA J-STD-034-ENGL L7 3234b00 058803b 778 I J-STD-034.1 1. INTRODUCTION 1.1 OBJECTIVE This is one of a series of recommendations titled WIRELESS ENHANCED EMERGENCY SERVICES” which p

47、rovides a solution for the limited capabilities of Wireless Enhanced Emergency Services. These capabilities include: subscriber identification provision of base station, cell site or sector identification information callback reconnect 1.2 SCOPE This document defines the range of application of the

48、current issue of the series. It focuses on overall objectives and basic assumptions. Procedural details are presented in the other recommendations. 1.3 ORGANIZATION This document is organized by the following sections: Sections 2, 3, and 4 titled “References”, “Functional Overview” and “Symbols and

49、Abbreviations” respectively provide a referral to terminology and acronyms used in this document. 1 Introduction STD-EIA J-STD-034-ENGL 1997 3234b00 0588037 bu4 J-STD-034.1 The TwEIA-41 recommendations are: ANSI/TwEIA-4 1, Cellular i2adiotelecommunicutions Intersystem Operations; 1997. The TMIMS-93 recommendations are: - ANSI/Iz4/EIA/IS-93, Cellular Radio Telecommunicationr Ai - Di lnterjiaces The ANSI J-STD-O23 recommendations are: ANSI J-STD-023, PCN to PCN Intersystem Operations based on PCS1900 Standard, approved for publicarion The ANS