TIA J-STD-036-C-1-2013 Enhanced Wireless 9-1-1 Phase II.pdf

1、 J-STD-036-C-1 (Addendum to ANSI/J-STD-036-C) October 2013 Enhanced Wireless 9-1-1 Phase II ANSI/J-STD-036-C-1-2013 APPROVED: OCTOBER 14, 2013 JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Standards Institute (ANSI) patent policy. By such actio

2、n, the Telecommunications Industry Association (TIA) or the Alliance for Telecommunications Industry Solutions (ATIS) does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to addre

3、ss all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This standard was develope

4、d under Project No. ANSI/TIA-PN-036-C-1, formulated under the cognizance of the TIA TR-45.8 Subcommittee on Core Networks, ATIS Emergency Services Interconnection Forum (ESIF) and ATIS Wireless Technologies and Systems Committee (WTSC). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology

5、 Telephone (703)907-7700; Fax: (703)907-7727 or by email to standardstiacomm.org. This document was coordinated between ATIS and TIA. A Word from TIA: TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstanding between manufacturers and p

6、urchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his/her particular need. Existence of such Standards and Publications shall not be in any respect preclude any member or nonmember

7、of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. TIA Doc

8、uments contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard

9、(ANS). Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm A Word from ATIS: As a leading technology and solutions development organization, ATIS brings together the top global ICT companies t

10、o advance the industrys most-pressing business priorities. Through ATIS committees and forums, nearly 200 companies address cloud services, device solutions, emergency services, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more.

11、 These priorities follow a fast-track development lifecyclefrom design and innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). A

12、TIS is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, an Associate Member of the National Public Sa

13、fety Telecommunications Council (NPSTC), and a member of the Inter-American Telecommunication Commission (CITEL). For more information, visit www.atis.org. NOTICE FROM PATENT HOLDERS The users attention is called to the possibility that compliance with this standard may require use of an invention c

14、overed by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith. The patent holder has, however, filed a statement of willingness to grant a license under these rights on reasonable and nondiscr

15、iminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunications Industry Association, Alliance for Telecommunications Industry Solutions or the American National Standards Institute. Copyright Telecommunications Industry Association 2013

16、 Copyright Alliance for Telecommunications Industry Solutions 2013 All rights reserved This document is subject to change. NOTICE OF COPYRIGHT This document is issued under a joint copyright by the Telecommunications Industry Association and the Alliance for Telecommunications Industry Solutions, an

17、d may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to th

18、e TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies by entering into a license agreement. For information, contact: Global Eng

19、ineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (303) 397-7956 OR ATIS Document Center: http:/www.atis.org/docstore/default.aspx Alliance for Telecommunications Industry Solutions 1200 G Street, NW Suite 500 Washington, DC 20

20、005 (202) 628-6380 NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). In addition, the Document was balloted by Alliance

21、 for Telecommunications Industry Solutions (“ATIS”) Wireless Technologies and Systems Committee (WTSC) and ATIS Emergency Services Interconnection Forum (ESIF). TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission gran

22、ted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manua

23、l.cfm. The ATIS Emergency Services Interconnection Forum (ESIF) and ATIS Wireless Technologies Systems Committee (WTSC) is expected to conduct its affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/legal/op.asp. TIAs function is to administer the proces

24、s, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Forums, is to administer the process according to its O

25、perating Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATIS disclaim any undertaking to perform any duty owed

26、 to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or in any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no assurance that the Document

27、will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights

28、(“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder th

29、ereof is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor ATIS takes any position with reference to, and dis

30、claims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA or ATIS opine or judge whether proposed lice

31、nsing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not enforce or monitor compliance with the contents of

32、the Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCUR

33、ACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKE NO REPRESENTATION

34、S OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. NEITHER TIA NOR ATIS SHALL BE LIABLE FOR ANY A

35、ND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED

36、UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA

37、 WITHOUT SUCH LIMITATIONS.ANSI/J-STD-036-C-1 Enhanced Wireless 9-1-1 Phase II Revision History Revision Date Remarks Rev. 0 August 2000 Initial publication Rev. 0 Addendum 1 December 2000 First addendum Rev. A March 2002 Publication of Revision A Rev. A Addendum 1 March 2003 Addendum to Revision A R

38、ev. B April 2005 Revision B Erratum December 2005 An erratum was published to correct the omission of the MEID parameter from several operations. ANSI/J-STD-036-B November 2006 Initial ANSI publication ANSI/J-STD-036-C September 2009 Support for cdma2000 Femto Cells ANSI/J-STD-036-C Addendum 1 Septe

39、mber 2013 New Class of Service Position Source indicators and associated Position Source codes Copyright 2013 by Alliance for Telecommunications Industry Solutions and Telecommunications Industry Association. All rights reserved. This document is subject to change. ANSI/J-STD-036-C-1 i Contents Enha

40、nced Wireless 9-1-1 Phase II Contents Foreword . ii 1 Introduction 1 1.1 Scope 1 1.2 Purpose .1 2 Modifications to J-STD-036-C2 2.1 Modifications to Chapter 7, Section 2 Emergency Services Protocol Abstract Syntax 2 2.2 Modifications to Chapter 8, Section 2.3.2.26 PositionSource MAP Parameter 8 ANSI

41、/J-STD-036-1 Foreword ii Foreword This foreword is not part of this Standard. This Addendum specifies text modifications to J-STD-036-C that define new Class of Service Position Source indicators and the associated Position Source codes needed for: Text to “911”; Emergency services calls originating

42、 from a small, semi-static wireless cell site; and Static wireless device at a residential address. This Addendum was developed by the WTSC-SN Subcommittee under the ATIS Wireless Technologies and Systems Committee (WTSC) and the TR-45.8 Subcommittee under the TIA Engineering Committee TR-45. ANSI/J

43、-STD-036-C-1 1 1 Introduction 1 Introduction 1.1 Scope This Addendum specifies new Class of Service Position Source (CoS) indicators, as well as the associated Position Source codes for the Mobile Positioning Center (MPC) and Positioning Determining Entity (PDE). The new CoS indicators will represen

44、t: Text message to “911”; Call originating from a small, semi-static wireless cell site; Static wireless device at a residential address. 1.2 Purpose This Addendum enables an MPC and PDE to assign the appropriate CoS indicator when delivering data to a Public Safety Answering Point (PSAP). ANSI/J-ST

45、D-036-1 2 Modifications to J-STD-036-C 2 2 Modifications to J-STD-036-C The following subsections specify the J-STD-036-C text modifications. The inserted text is shown in blue and is underscored (e.g., inserted). All the text modifications are shown with change bars. 2.1 Modifications to Chapter 7,

46、 Section 2 Emergency Services Protocol Abstract Syntax The following text modifications to the J-STD-036-C Emergency Services Protocol Abstract Syntax add new Class of Service Position Sources values for the PositionSource parameter: The Emergency Services Protocol is composed of one ASN.1 module de

47、aling with operations, errors and data types. EmergencyServicesProtocol iso (1) memberbody (2) usa (840) emergencyServicesProtocol (1) DEFINITIONS := BEGIN EXPORTS Digits, GeographicPosition, IMSI, MobileIdentificationNumber, PositionInformation, PositionRequestType; IMPORTS ERROR, OPERATION FROM TC

48、APPackage iso (1) memberbody (2) usa (840) T1.114 (10013) ; - Operations Definitions - The Emergency Services Position Request operation is used to request the initial, - updated or last known position of an MS. The default value of the Emergency Services Position Request - Timer (ESPRT) is beyond t

49、he scope of this Standard. EmergencyServicesPositionRequest := OPERATION - Timer ESPRT PARAMETER esprArg EmergencyServicesPositionRequestArgument RESULT esprRes EmergencyServicesPositionRequestResponse ANSI/J-STD-036-C-1 3 2 Modifications to J-STD-036-C ERRORS SystemFailure, UnauthorizedRequest, UnexpectedDataValue, UnrecognizedKey - Emergency Services Position Request operation code family and specifier emergencyServicesPositionRequest EmergencyServicesPositionRequest := localValue 1, 1 - Emergency Services errors and error codes Sy