1、 TSB-102.CBAF April 2009 Project 25 Compliance Assessment Summary Test Report Guidelines Trunking Interoperability NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating inte
2、rchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or
3、 selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American N
4、ational Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use o
5、r all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0358, formulated under the cognizance of th
6、e TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee onCompliance Assessment). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNIC
7、ATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS USA and Canada (1-800-525-7052 ) International (303-790-0600) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TI
8、A. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for det
9、ails on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any ot
10、her form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more p
11、arties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and d
12、isclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditi
13、ons are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another
14、organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thed
15、ition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s)
16、 and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor com
17、pliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIE
18、S CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO
19、REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY
20、AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED
21、 UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TI
22、A WITHOUT SUCH LIMITATIONS. TSB-102.CBAF Foreword (This foreword is not part of this bulletin.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that
23、APCO/NASTD/FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA Project 25 Interface Commi
24、ttee (APIC), the APIC Compliance Assessment Process and Procedures Task Group, and TIA Industry members. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describe
25、s formatting guidelines for summary test reports submitted to document Project 25 compliance. As other documents associated with the Compliance Assessment Program are developed, this document will be subject to change. This TSB includes one annex. TSB-102.CBAF 1 Table of Contents 1 Introduction2 1.1
26、 Scope2 1.2 Revision History.3 1.3 Conventions3 1.4 Informative References3 1.5 Abbreviations and Acronyms4 2 Summary Test Report Contents5 2.1 P25 CAP Letterhead, Title, and Page Count.5 2.2 Test Item Description.6 2.3 Test Information.6 2.4 References7 2.5 Subscriber Units Tested7 2.6 Test Cases a
27、nd Results.8 2.7 Result Definitions.9 2.8 Result Comments.9 ANNEX A Trunked System Summary Test Report Format (Informative).11 List of Figures Figure 1. First Page P25 CAP Letterhead, Title, and Report Number.5 Figure 2. P25 CAP Letterhead, Title Header, and Report Number5 Figure 3. Page Count6 Figu
28、re 4. Test Item Description.6 Figure 5. Test Location6 Figure 6. Informative References7 Figure 7. Subscriber Units Tested.7 Figure 8. Test Cases and Results8 Figure 9. Test Case Result Definitions9 Figure 10. Test Case Result Comments9 TSB-102.CBAF 2 1 Introduction The intent of the Project 25 (P25
29、) Compliance Assessment Program (P25 CAP) at NIST/OLES at the time of this writing is to facilitate land mobile radio (LMR) communications services identified in the P25 Statement of Requirements (SoR) and addressed in Telecommunications Industry Association (TIA) published standards documents inter
30、operate between manufacturers due to those manufacturers adhering to the published standards describing these services. Numerous documents discuss the P25 CAP tests deemed necessary by the industry and user members participating in the work of the P25 Compliance Assessment Process and Procedures Tas
31、k Group (CAPPTG). The CAPPTG includes TIA members and representatives of Federal, State and Local Public Safety agencies and organizations. This group, being familiar with the relevant published standards, available P25 equipment and test equipment and the general intentions of the P25 CAP, reviews
32、all tests and performance recommendations. This Telecommunications Systems Bulletin (TSB) outlines the content format for summary test reports submitted to document P25 compliance. This document was drafted and reviewed within the APCO/TIA Project 25 Interface Committee (APIC), Compliance Assessment
33、 Process and Procedures Task Group. 1.1 Scope To suggest uniform format guidelines for use in preparation of a summary test report submitted to the P25 CAP office and other relevant agencies where such LMR summary test reports are intended to document the evaluation of compliance with relevant P25 C
34、AP requirements. TSB-102.CBAF 3 1.2 Revision History Version Date Description Informal drafts March September, 2008 Determination of the Summary Test Report content guidelines. Draft 1.0 November XX, 2008 Document containing the approved Summary Test Report forms content guidelines in a format appro
35、priate for publication as a TIA Telecommunications Systems Bulletin. Draft 1.1 June, 2008 Resolution of comments. Draft 1.2 July, 2008 Second round of comment resolution. Draft 1.3 July, 2008 Third round of comment resolution. Draft 1.4 July, 2008 Third round of comment resolution with document iden
36、tifiers made consistent. Draft 1.5 July, 2008 Fourth round of comment resolution with MOTs further comments addressed. Draft 1.7 August, 2008 Tyco/MOT comment resolution proposal. Draft 1.8 August, 2008 MOT comment resolution proposal. Release October, 2008 Consensus reached. Release 2 January, 2009
37、 NIST/OLES comment resolution. 1.3 Conventions Throughout this TSB and its annex, gray text is illustrative to represent variable content. 1.4 Informative References 1 NIST Handbook 153:2007, Laboratory Recognition Process for Project 25 Compliance Assessment1 2 DHS P25 CAP Charter:2008, Charter and
38、 Requirements for the Project 25 Compliance Assessment Program2 3 P25-CAB-TEST_REQ August 20083 1 Available at: http:/www.eeel.nist.gov/oles/Publications/Office_of_Law_Enforcement_Standards.pdf. Cited March 2008. 2 Available at: https:/www.safecomprogram.gov/NR/rdonlyres/D295A545-44A4-4226-AAF7-56A3
39、3684908E/0/Project25ComplianceAssessmentProgramCharter.pdf. Cited May 2008 3 Available at: http:/www.safecomprogram.gov/SAFECOM/currentprojects/project25cap/ TSB-102.CBAF 4 1.5 Abbreviations and Acronyms APCOAssociation of Public-Safety Communications Officials APICAPCO Project 25 Interface Committe
40、e CAPCompliance Assessment Program CAPPTGCompliance Assessment Process and Procedures Task Group DHSDepartment of Homeland Security DTRDetailed Test Report LMRLand Mobile Radio NISTNational Institute of Standards and Technology P25Project 25 SoRStatement of Requirements SUSubscriber Unit TIATelecomm
41、unications Industry Association TSBTelecommunications Systems Bulletin TSB-102.CBAF 5 2 Summary Test Report Contents This section of the TSB describes each major element or section of the summary test report in a separate subsection. 2.1 P25 CAP Letterhead, Title, and Page Count The first page of th
42、e summary test report begins with the P25 logo, about 1.5 inches wide, in the top left corner of the page. The P25 CAP label, followed by the summary test title and report identification number4 should appear to the right of the P25 logo. The title of the report always begins with the words Summary
43、Test Report, followed by an em-dash (), followed by the subject of the title. Prrojjectt 25 Complliiance Assessmentt Prrogrram Summary Test Report Trunking Interoperability Trunked Voice Mode STR-LMR-123456 Figure 1. First Page P25 CAP Letterhead, Title, and Report Number Each page following the fir
44、st page in the summary test report carries the P25 CAP letterhead, title, device under test, and report identification number3 as a header. The P25 logo is proportionately smaller, as is the font size of the P25 CAP letterhead and title. The layout of these elements is the same as on the first page.
45、 Prrojjjeecctt 2255 Compllliiiaanccee Asssseessssmeentt Prrogrraam Summary Test Report Trunking Interoperability Trunked Voice Mode Wokytoky Trunk 25 STR-LMR-123456 Figure 2. P25 CAP Letterhead, Title Header, and Report Number 4 The Summary Test Report identification code format is as follows: STR-.
46、 The manufacturer unique identifier is selected by the manufacturer that is issuing the STR, and should be unique so as not to be confused with another manufacturers STRs. Additionally, the manufacturer document identification # is a number that is chosen by the manufacturer issuing the STR, and is
47、unique to other STRs issued by that same manufacturer. TSB-102.CBAF 6 Each page of the summary test report includes the current page number and the total number of pages (Page # of #). Page 1 of 6 Figure 3. Page Count 2.2 Test Item Description A description of the item tested appears at the top of t
48、he document, just below the P25 CAP logo, letterhead, and summary test report title. It includes the name of the manufacturer, manufacturer contact, product name, and installed options. Test Item Description Manufacturer LMR Equipment Corporation Manufacturer Contact Ima Manufacturer - (303) 555-121
49、2 Product Name Trunked Radio System Installed Options LMR Equipment Corp. Version 4.35 Figure 4. Test Item Description 2.3 Test Information Laboratory information for the item tested appears following the description of the test item. It includes the P25 CAP laboratory code assigned by DHS based on the recognition process, the date of the test (might be a single date, two or more dates, or a date range), and the date the test report was issued. If multiple laboratories were involved in testing the specified product, this table will be reproduced
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1