TIA TSB-102 CBBH-A-2015 Project 25 Recommended Compliance Assessment Tests Performance- Trunked Mode Fixed Station Transceiver and Related Infrastructure.pdf

1、 TSB-102.CBBH-A May 2015Project 25 Recommended Compliance Assessment Tests Performance- Trunked Mode Fixed Station Transceiver and Related Infrastructure NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufact

2、urers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or

3、non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted b

4、y TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all sa

5、fety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this docum

6、ent are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project Proposal No. TIA-PN-102.CBBH-A, formulated under the cognizance of the TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee

7、on Compliance Assessment). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIO

8、NS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft c

9、opy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: h

10、ttp:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or chan

11、ged in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When

12、IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the

13、 scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warr

14、ant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, deve

15、lopment or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or oblig

16、ation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pend

17、ing patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the co

18、ntents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE AC

19、CURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR

20、WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DI

21、RECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CON

22、TRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMI

23、TATIONS. TSB-102.CBBH-A Foreword (This foreword is not part of this bulletin.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that APCO/NASTD/FED wi

24、ll devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA Project 25 Interface Committee (APIC), the

25、APIC Compliance Assessment Process and Procedures Task Group, and TIA Industry members. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes a subset of tes

26、ts appropriate for consideration by the P25 Compliance Assessment Program Governance Board for inclusion in the Compliance Assessment Program testing associated with Trunked Mode Fixed Station Transceiver Performance. As other documents associated with compliance assessment are developed, this docum

27、ent will be subject to change. The P25 Compliance Assessment Program uses a subset of published standard tests to “assess” compliance and is not intended to imply an exhaustive standard compliance verification. Standardized Measurement Methods and Performance Recommendations for the tests identified

28、 here can be found in the normative references to this document. TSB-102.CBBH-A 1 Table of Contents 1 INTRODUCTION 2 1.1 Scope 2 1.2 Revision History 3 1.3 References 3 2 TESTS 4 List of Tables Table 1-1 Revision History 3 Table 2-1 Trunked Mode Fixed Station Receiver Tests 4 Table 2-2 Trunked Mode

29、Fixed Station Transmitter Tests 4 Table 2-3 Trunked Mode Infrastructure Tests 4 TSB-102.CBBH-A 2 1 Introduction The purpose of this Telecommunications Systems Bulletin is to identify the subset of tests appropriate for consideration by the P25 Compliance Assessment Program Governance Board for inclu

30、sion in the P25 Compliance Assessment Program testing of Trunked Mode Fixed Station Transceiver (and related infrastructure) Performance. The P25 Compliance Assessment Program intends to demonstrate that the equipment from different manufacturers will interoperate with respect to P25 defined feature

31、s, services and interfaces. The P25 Compliance Assessment Program uses a subset of published standard tests to “assess” compliance and is not intended to imply an exhaustive standard compliance verification. The full set of Trunked Mode Fixed Station Transceiver Measurement Methods and Performance R

32、ecommendations published by TIA for P25 may be found in references 1 and 2. This document does not substitute or override any of the tests in reference 1 or 2. This document identifies a subset of the full set of tests in references 1 and 2 appropriate for P25 Compliance Assessment performance testi

33、ng for a fixed station transceiver (and related infrastructure) operating in the Trunking mode. This document was drafted and reviewed within the APCO/TIA Project 25 Interface Committee (APIC), Compliance Assessment Process and Procedures Task Group (CAPPTG), and represents the consensus achieved wi

34、thin the CAPPTG once the comment review period was concluded. The draft was subsequently updated to reflect the CAPPTG agreements in preparation for publication. 1.1 Scope This Bulletin identifies the tests appropriate for consideration by the P25 Compliance Assessment Program Governance Board for C

35、ompliance Assessment testing in the area of Performance of a Trunked Mode Fixed Station and related Infrastructure. These tests were deemed appropriate by the industry and user members participating in the work of the Compliance Assessment Process and Procedures Task Group (CAPPTG). The CAPPTG inclu

36、des TIA members and representatives of Federal, State and Local Public Safety agencies and organizations. This group, being familiar with the relevant published standards, available P25 equipment and test equipment and the general intentions of the P25 Compliance Assessment Program, reviewed all tes

37、ts and performance recommendations described in references 1 and 2. The P25 Compliance Assessment Program confirms that the equipment of different manufacturers will interoperate with respect to the P25 defined features, services and interfaces. P25 Compliance Assessment testing of the Common Air In

38、terface is expected to eventually include; Performance Tests ensuring the Common Air Interface endpoints are legitimate P25 devices for Trunking mode operation, Conventional mode operation, or both. TSB-102.CBBH-A 3 Conformance Tests ensuring the Common Air Interface endpoints exchange the proper me

39、ssages under the proper circumstances for Trunking mode operation, Conventional mode operation, or both. Interoperability Tests ensuring that Common Air Interface endpoints from different manufacturers do functionally interoperate for Trunking mode operation, Conventional mode operation, or both. In

40、 determining the tests appropriate for P25 Compliance Assessment Program testing in this area, the group considered whether tests in references 1 and 2 were important for achieving interoperability between equipment of different manufacturers versus tests important for product design and/or certific

41、ation. In general, tests that were determined to be more oriented towards product design and/or certification were deemed unnecessary for inclusion in this list. The resulting list therefore represents tests that are most important for or most likely to impact interoperability between manufacturers

42、building to the same set of published standard documents. 1.2 Revision History Version Date Description First Edition February, 2009 Approved for publication. R1 July, 2014 Updates per TR-8.25 decisions in Charlotte. R2 February, 2015 Approved for publication. Table 1-1 Revision History 1.3 Referenc

43、es 1 TIA-102.CAAA-D C4FM/CQPSK Transceiver Measurement Methods 2 TIA-102.CAAB-D C4FM/CQPSK Transceiver Performance Recommendations TSB-102.CBBH-A 4 2 Tests The following tables are derived from references 1 and 2. These tables define the subset of tests determined appropriate for demonstrating compl

44、iance as part of the P25 Compliance Assessment Program. Each test is listed referencing its corresponding method of measurement from 1 and its corresponding performance recommendation from 2. Trunking Station Receiver Tests Method of Measurement 1 Performance Recommendation 2 Reference sensitivity 2

45、.1.4 3.1.4 Faded Reference Sensitivity 2.1.5 3.1.5 Adjacent Channel Rejection 2.1.7 3.1.7 Co-Channel Rejection 2.1.8 3.1.8 Spurious Response Rejection 2.1.9 3.1.9 Intermodulation Rejection 2.1.10 3.1.10 Signal Displacement Bandwidth 2.1.11 3.1.11 Table 2-1 Trunked Mode Fixed Station Receiver Tests T

46、runking Station Transmitter Tests Method of Measurement 1 Performance Recommendation 2 Unwanted Emissions: Adjacent Channel Power Ratio 2.2.8 3.2.8 Transmitter Throughput Delay1 2.2.14 3.2.14 Frequency Deviation for C4FM 2.2.15 3.2.15 Modulation Fidelity 2.2.16 3.2.16 Transient Frequency Behavior 2.

47、2.18 3.2.18 Table 2-2 Trunked Mode Fixed Station Transmitter Tests 1Applies to fixed stations which provide an audio (analog) input only. Trunking Infrastructure Tests Method of Measurement 1 Performance Recommendation 2 Trunking Voice Access Time (applies to infrastructure and SU and measurement me

48、thod necessitates both trunking infrastructure and subscriber equipment) 2.3.3 3.3.3 Time to Grant (applies to infrastructure but measurement method necessitates both trunking infrastructure and subscriber equipment) 2.3.4 3.3.4 Table 2-3 Trunked Mode Infrastructure Tests THE TELECOMMUNICATIONS INDU

49、STRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public saf