TIA TSB-102 CBBJ-C-2015 Project 25 Recommended Compliance Assessment Tests- Trunking Operation.pdf

1、 TSB-102.CBBJ-C June 2015Project 25 Recommended Compliance Assessment Tests- Trunking Operation NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and

2、improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products n

3、ot conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards I

4、nstitute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable re

5、gulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an

6、endorsement by TIA or this committee of the products or services of the company. (From Project Proposal No. TIA-PN-102.CBBJ-C, formulated under the cognizance of the TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee on Compliance Assessment). Published by TELECOMMUNICATIONS

7、 INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) Internatio

8、nal (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without c

9、opyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyrigh

10、t or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. T

11、he use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent app

12、lications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither

13、be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or

14、 provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as

15、 a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SS

16、O for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information

17、 as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, tes

18、t or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR

19、 A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPL

20、ICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF T

21、HE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PR

22、ODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TSB-102.CBBJ-C Foreword (This foreword is not par

23、t of this bulletin.) This document is being submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that APCO/NASTD/FED will devise a Common System Standard for digital public safe

24、ty communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA Project 25 Interface Committee (APIC), the APIC Compliance Assessment Process and Procedures Task Gro

25、up (CAPPTG), and the members of TR-8.25. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes a subset of tests appropriate for consideration for use in a c

26、ompliance assessment testing environment associated with Trunking Air Interface Interoperability and Conformance. As other documents associated with compliance assessment are developed, this document will be subject to change. Standardized Trunking Interoperability and Conformance tests are identifi

27、ed here and can be found in the normative references of this document.TSB-102.CBBJ-C 1 Table of Contents 1 INTRODUCTION 2 1.1 Scope 2 1.2 Revision History 3 1.3 References 3 2 TESTS 4 List of Tables TABLE 1 - REVISION HISTORY . 3 TABLE 2 - TRUNKING TESTS 4 TSB-102.CBBJ-C 2 1 Introduction The purpose

28、 of this Telecommunications Systems Bulletin is to identify the subset of tests that the subject matter expert members of TIA TR-8.25 have determined to be appropriate for use in a compliance assessment testing environment of Common Air Interface endpoint equipment, i.e. infrastructure and subscribe

29、r units, for Trunked Voice operation. This document recommends a subset of published standard tests to “assess” compliance and is not intended to imply exhaustive standard compliance verification. The full set of Trunking Interoperability and Conformance tests published by TIA for P25 may be found i

30、n references CABC, CAEC, and CAED. This document does not substitute or override any of the tests in references CABC, CAEC, and CAED. This document identifies a subset of the full set of tests in references CABC, CAEC, and CAED appropriate for the compliance assessment testing of Common Air Interfac

31、e Endpoint Equipment, i.e. infrastructure and subscriber units, for Trunked Voice operation. 1.1 Scope This Bulletin identifies the tests appropriate for use in compliance-assessment-type testing in the area of Trunked Voice operation. These tests were deemed appropriate by the members of TR-8.25. T

32、his group, being familiar with the relevant published standards, available test equipment and the general intentions of compliance assessment testing, reviewed all trunking interoperability and conformance tests described in references CABC, CAEC, and CAED. The TIA TR-8.25 subcommittee is responsibl

33、e for maintaining the document and keeping it current with the latest published revisions of references CABC, CAEC, and CAED. In determining the tests appropriate for compliance assessment testing in this area, the group considered whether tests in references CABC, CAEC, and CAED1 were important for

34、 achieving interoperability between equipment of different manufacturers versus tests important for product design and certification. In general, tests that were determined to be more oriented towards product design and certification were deemed unnecessary for inclusion in this list. The resulting

35、list therefore represents tests that are most important for or most likely to impact interoperability between manufacturers building to the same set of published standard documents and conformance to the aforementioned standards. 1 Refer to CBBL for TDMA voice channel conformance tests not included

36、in this document. TSB-102.CBBJ-C 3 1.2 Revision History Table 1 - Revision History Version Date Description First Edition February, 2009 Approved for publication. Second Edition February, 2011 Approved for publication. Third Edition May, 2015 Approved for publication. 1.3 References 1.3.1 Normative

37、References CABC TIA-102.CABC-B Interoperability Testing for Voice Operation in Trunked Systems and its addendums CAEC TIA-102.CAEC Conformance Profile Basic Trunked Operation CAED TIA-102.CAED Conformance Profiles for Advanced Trunked Operations 1.3.2 Informative References CBBL TSB-102.CBBL Recomme

38、nded Compliance Assessment Tests Two Slot TDMA Trunking Voice Channel Air Interface TSB-102.CBBJ-C 4 2 Tests TIA TR-8.25 has identified the following tests after review of references CABC, CAEC, and CAED. Table 2 defines the subset of tests determined appropriate for demonstrating compliance. Each t

39、est is listed referencing its corresponding test from CABC, CAEC, and CAED. Tests are to be executed in each of the Home and Roaming configurations described in reference CABC section 2.1.1, CAEC, and CAED, provided that the configuration is supported by the manufacturer. Table 2 - Trunking Tests Tr

40、unking Operation Tests Interoperability Test from CABC Conformance Test from CAEC Conformance Test from CAED Full registration 2.2.1 Valid registration2 2.2.1.4.1 6.2 6.1 Denied or refused registration 2.2.1.4.2 6.3, 6.6 NA Unverified registration 2.2.1.4.3 NA NA Group voice call 2.2.2 Group call gr

41、anted2,3 2.2.2.4.1 9.2, 9.3 7.1 Group call denied 2.2.2.4.2 9.4 NA Group call request queued2,3 2.2.2.4.3 9.5 NA Group call interrupt2,3,4 2.2.2.4.4 NA NA Late entry for group call2,3 2.2.2.4.6 NA 7.2, 7.3 Group Call Termination 10.2 NA Unit-to-unit voice call 2.2.3 Unit-to-unit call with target ava

42、ilability check2,3,5 2.2.3.4.1 15.2, 15.3 7.5 Unit-to-unit call without target availability check2,3,5 2.2.3.4.5 16.2, 16.3 7.6 Unit-to-unit call with target availability check denied by target5 2.2.3.4.2 15.5 NA Unit-to-unit call queued with target availability check - traffic channel assignment af

43、ter target availability check2,3,5,6 2.2.3.4.3 15.6 NA Unit-to-unit call queued with target availability check - traffic channel assignment before target availability check2,3,5,6 2.2.3.4.4 15.7 NA 2 Test should be executed in both FDMA and TDMA mode, if the SU and RFSS both support TDMA mode. 3 Tes

44、t should be executed in both implicit and explicit channel signaling mode, if both the RFSS and the SU support explicit channel signaling mode. 4 If provided by the manufacturer. 5 The Fixed Network Equipment may support target availability check, no target availability check, or both. 6 The Fixed N

45、etwork Equipment that supports target availability check may support traffic channel assignment before or after the target availability check. TSB-102.CBBJ-C 5 Trunking Operation Tests Interoperability Test from CABC Conformance Test from CAEC Conformance Test from CAED Unit-to-unit call queued with

46、out target availability check2,3,5 2.2.3.4.6 16.5 NA Unit-to-unit call denied 2.2.3.4.7 15.4, 16.4 NA Unit-to-Unit Call Termination 17.2 NA Broadcast voice call 2.2.4 Broadcast voice call2,3 2.2.4.4.1 12 NA Affiliation 2.2.5 Radio permitted to affiliate with new group 2.2.5.4.1 7.2 6.6 Radio denied

47、affiliation to new group 2.2.5.4.2 7.3 NA Announcement group call 2.2.6 Collection of talk groups receive call2,3 2.2.6.4.1 11 NA Emergency alarm 2.2.7 Emergency alarm4 2.2.7.4.1 19.2 NA Emergency group call 2.2.8 Emergency call2,3,4 2.2.8.4.1 13 NA Emergency call request queued2,3,4 2.2.8.4.5 13 NA

48、 Emergency call request ruthless preemption2,3,4 2.2.8.4.6 NA NA Encryption 2.2.10 Call privacy for encrypted call2,3,4 2.2.10.4.1 14 NA Late entry for encrypted call2,3,4 2.2.10.4.2 NA 7.2, 7.3 Roaming 2.2.11 Idle radio 2.2.11.4.1 8.1 6.1 Authentication 2.2.12 Authentication4 2.2.12.4.1 NA 6.2, 6.3

49、 Authentication Failure4 2.2.12.4.2 NA NA Deregistration 2.2.13 Deregistration4 2.2.13.4.1 NA 6.7 System Call 2.2.14 System Call2,3,4 2.2.14.4.1 NA 7.4 Call Alert 2.2.15 Call Alert4 2.2.15.4.1 NA 8.1, 8.5 Short Message 2.2.16 Short Message4 2.2.16.4.1 NA 8.7, 8.11 Status Query 2.2.17 Status Query4 2.2.17.4.1 NA 8.19, 8.23 Status Update 2.2.18 Status Update4 2.2.18.4.1 NA 8.13, 8.17 Radio Unit Monitoring 2.2.19 Radio Unit Monitor - Individual Non-Silent2,3,4 2.2.19.4.1 NA 8.25, 8.27, 8.28,