1、 TSB-179 November 2010 Terrestrial Land Mobile Radio Antenna Systems - Total “Antenna System” Return Loss Measurements NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating
2、interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturin
3、g or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the Americ
4、an National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its u
5、se or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. PN-3-0300, formulated under the cognizanc
6、e of the TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.11 Subcommittee onAntenna Systems). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNI
7、CATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS USA and Canada (1-800-525-7052 ) International (303-790-0600) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the T
8、IA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for de
9、tails on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any o
10、ther form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more
11、parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and
12、disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or condit
13、ions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another
14、 organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4the
15、dition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s
16、) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor co
17、mpliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTI
18、ES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO
19、 REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY
20、 AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASE
21、D UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY T
22、IA WITHOUT SUCH LIMITATIONS. i TABLE OF CONTENTS FOREWORD ii Patent Identification . iii INTRODUCTION . iv 1.0 SCOPE . 1 2.0 BACKGROUND 2 3.0 DEFINITIONS AND ABBREVIATIONS . 3 4.0 SYSTEM VSWR ESTIMATION TOOLS . 4 4.1 Naval Electronic Warfare Handbook . 4 4.2 Early Calculation of System Return Loss 5
23、 4.3 Improved System Return Loss Calculation Method 6 4.4 Latest System Return Loss Spreadsheet Calculator 7 4.5 Tower Mounted Amplifier Example . 10 5.0 CONCLUSION 11 BIBLIOGRAPHY 12 ii FOREWORD (This foreword is not part of this Bulletin) This Bulletin was prepared by TIA Working Group TR-8.11.5 a
24、nd was approved by TIA Engineering Subcommittee TR-8.11. This document includes no Annexes. This is the original release of this Bulletin. It supersedes no previous TIA document. The source of much of this Bulletin is acknowledged to be from Andrew Solutions, a CommScope Company. Patent Identificati
25、on The readers attention is called to the possibility that using this document might necessitate the use of one or more inventions covered by patent rights. By publication of this document no position is taken with respect to the validity of those claims or any patent rights in connection therewith.
26、 The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. The following patent holders and patents have been identified in accor
27、dance with the TIA intellectual property rights policy: None identified TIA is not responsible for identifying patents for which licenses might be referenced by this document or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. iv INTRODUCT
28、ION Return Loss or VSWR sweeps taken at the bottom end of the transmission line are used by systems operators and contractors to determine the condition of the complete RF path including the antenna. For many years, this RF path consisted of the main transmission line, jumper cables and an antenna.
29、Several calculators were developed to estimate what the expected return loss or VSWR ought to be if all components were meeting specification. Since the antenna was by far the component with the highest VSWR, out-of-specification readings at the bottom end often could be traced to an out-of-specific
30、ation antenna. However, with the advent of more complex systems incorporating additional devices such as Tower Mounted Amplifiers and Diplexers, the antenna is no longer the only major VSWR contributor in the RF path. This Bulletin addresses the issues associated with measuring the complete RF path
31、and offer some suggestions about how to make more meaningful measurements. TIA TSB-179 1 Terrestrial Land Mobile Radio - Antenna Systems - Total “Antenna System” Return Loss Measurements 1.0 SCOPE In the land mobile radio service there has historically been no clear relationship between the VSWR spe
32、cifications of the individual components in the RF path and the expected resultant “system” VSWR at the bottom end of the transmission line. This makes it difficult, at best, for system operators to set a realistic set of measurement expectations for installers and technicians to use for checking co
33、mpleted installations Various calculators and nomographs have been developed over the years to try to estimate what the expected system VSWR ought to be for the total RF path, but, at best they treat the combination of the individual component VSWR vectors as if they combine in a random fashion. Thi
34、s might be true most of the time, but there might be those instances where random vector combinations do not happen. This Bulletin presents some of the nomographs and calculators that have been employed over the years and introduces an improved calculator that shows both typical and worst case vecto
35、r summation. It also presents some theoretical reference material detailing how the VSWRs of specific components might combine. 1. The use of manufacturers names is not an endorsement, rather an acknowledgement to the source of the material in this Bulletin. TIA TSB-179 2 2.0 BACKGROUND The terms Vo
36、ltage Standing Wave Ratio (VSWR), Return Loss (RL), Reflection Coefficient () and Mismatch Loss are all terms used to define the amount of mismatch between an RF source and an RF load; hence they are a measure of the efficiency of the RF transmission system. They are all mathematically related and c
37、an be easily converted using the equations in 3.0, 2. Some of the earliest information used for estimating the total system VSWR from the bottom end of the transmission line was presented as a simple nomograph. Later, calculation methods based on compiled measured data were suggested and they includ
38、ed “multiplication factor” based on data taken on thousands of antenna systems. With the advent of electronic spreadsheets, more complex calculators were developed to take into account all of the individual components in the RF path along with more specifications associated with the individual compo
39、nents. This approach also allowed for calculation of not only the typical system value where random vector combinations are employed, but also allows for calculation of the worst-case system value where all vectors add together in phase 1. Over the years, an antenna VSWR specification of 1.5:1 (14 d
40、B RL) has been deemed acceptable for most applications. This value equates to 96% forward power transfer or only 4% reflected power. Many system owners have increased this 14 dB return loss number by a few dB, which improves the VSWR (e.g., 16 dB RL to include a transmission line contribution) and d
41、efine it as the total system return loss goal. As the industry progresses to very high-speed data transmission, there is another phenomenon that may need to be considered. For example, throughput for 64 QAM modulations can be degraded due to distortion. A higher system VSWR translates to reduced mod
42、ulation fidelity, caused by non-optimal loading of the power amplifier (PA). This concept was introduced as non-optimal PA loading in a Network Interface Card (NIC) by its antenna. 7, 8. TIA TSB-179 3 3.0 DEFINITIONS AND ABBREVIATIONS EVM: Error Vector Magnitude loge: The natural logarithm MHA: Mast
43、 Head Amplifier (same as Tower Mounted Amplifier) NIC: Network Interface Card PA: Power Amplifier QAM: Quadrature Amplitude Modulation RF: Radio Frequency RL: Return Loss RF Path: The path an RF signal travels to get from the transmitter output until it is radiated by the antenna. This is not to be
44、confused with the propagation loss of the RF path between antennas. TMA: Tower Mounted Amplifier (same as Mast Head Amplifier) Equations: VSWR = 11= 20201 101 10RLRL= 11RFRFPPPP(1) Return Loss (RL) = 1 0 1 0 1 011 0 o g 2 0 o g 2 0 o g1FRP V S W RL L LP V S W R (2) Voltage Reflection Coefficient 201
45、 ( ) 1 01RLRFV S W R PV S W R P (3) Where: Return Loss(dB) is a positive value 0 TIA TSB-179 4 4.0 SYSTEM VSWR ESTIMATION TOOLS 4.1 Naval Electronic Warfare Handbook Early total system VSWR estimates made use of nomographs like the one shown in Figure 1 below from the Naval Electronic Warfare Handbo
46、ok 2: Figure 1 Reduction of VSWR by Attenuation The results obtained from Figure 1 are somewhat over-simplified in that they do not take into account the VSWR of the attenuator (transmission line). Instead, it simply adds twice the attenuator value (once to get up to the load and a second time to ge
47、t back to the bottom end) to produce the load VSWR. As an example, a load (antenna) with a 10:1 VSWR connected by an attenuator (transmission line) with a loss of 6 dB yields an input VSWR of 1.5:1. Although this is a somewhat optimistic number, it still provides insight into how the combined compon
48、ents react together.TIA TSB-179 5 Early Calculation of System Return Loss An early calculation of System Return Loss 3 was targeted for microwave systems and it first introduced the “multiplication factor” based on data taken on thousands of antenna systems. This calculator included only an antenna,
49、 top jumper, transmission line, surge arrestor and bottom jumper. It did not take into account jumper cable(s) and surge arrestor losses. This method calculates peak or worst case system VSWR. Step 1. Convert VSWR or return loss to reflection coefficients in decimal form for all components in the system. Step 2. Divide the components into 3 groups: Top antenna and jumper(s) Transmission Line Bottom surge arrestor and jumper(s) Step 3. Add the reflection coefficient of all the top components and convert
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1