TIA TSB-18-B-2014 The Mechanical Functional Characteristics Between DCEs and Voiceband Analog Channels.pdf

1、 TSB-18-B (Revision of TSB-18) July 2014The Mechanical/ Functional Characteristics Between DCEs and Voiceband Analog Channels NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facili

2、tating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manuf

3、acturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the

4、 American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated wit

5、h its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purp

6、oses and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. 3-2581-RV2, formulated under the cognizance of the TIA TR-30.3 Subcommittee on Data Communications Network Interfaces). . Published by TELECOMMUNICATIONS INDUSTRY ASSOCIAT

7、ION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Do

8、cument may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs

9、attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensin

10、g terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complie

11、d with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendatio

12、n or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relatin

13、g to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or pu

14、blications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, desi

15、gns or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHAN

16、TABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR TH

17、E SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING W

18、ITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADV

19、ISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TELECOMMUNCATIONS SYSTEMS BULLETIN NO. 18-B The Mechanical/Functional Characteristics of t

20、he Interface Between DCEs and Voiceband Analog Channels Prepared by TR-30.3 Subcommittee on Data Communication Network Interfaces TSB 18-B This Engineering Bulletin is being issued in advance of the Standard for the “INTERFACE BETWEEN DATA CIRCUIT TERMINATING EQUIPMENT (DCE) AND VOICEBAND ANALOG LEA

21、SED LINES” in order to provide manufacturers of DCEs with timely information on this interface. This information reflects agreements reached between EIA Technical Subcommittee TR-30.3 and the representatives of Exchange Telephone carriers. Equipment conforming to this interface is already available

22、from many facility providers. This information will be incorporated in the Standard for the “INTERFACE BETWEEN DATA CIRCUIT TERMINATING EQUIPMENT (DCE) AND VOICEBAND ANALOG LEASED LINES” when it is issued. TSB 18-B Page 1 THE MECHANICAL/FUNCTIONAL CHARACTERISTICS OF THE INTERFACE BETWEEN DCEs AND VO

23、ICEBAND ANALOG CHANNELS 1.1 The interface between the DCE and the analog leased line is located at a pluggable connector. An 8-position keyed modular jack (female) is specified for the network side of this interface. The plug (male) associated with the DCE can either be keyed or unkeyed. To alleviat

24、e cross-talk, it is recommended that twisting pairs be used for interface cords exceeding 15 feet in length. 1.2 The interchange circuits, with their associated pin-pair relationships, should be assigned in accordance with Table 1 below (see Figure 1). 1.3 DCE MANUFACTURERS SHOULD BE CAUTIONED THAT

25、THIS CONNECTOR IS USED IN A VARIETY OF APPLICATIONS AND THEREFORE UNSPECIFIED POTENTIALS COULD BE FOUND ON ANY OF THESE PINS. SPECIFICALLY, PINS 1 & 2 AND 7 & 8 HAVE BEEN ASSIGNED FOR OPTIONAL POWERING ARRANGEMENTS IN ISDN. PAIR/PIN INTERCHANGE CIRCUIT FROM DCE TO DCE 1/1* Transmit Signal (R1) X 1/2

26、* Transmit Signal (T1) X 2/3* TEK5 Loopback Indicator X 3/4 Reserved 2/6* TEK6 Loopback Indicator X 4/7 Receive Signal (T) X 4/8 Receive Signal (R) X Table 1: Interchange Circuit Assignments * This pair is used for 2-wire access. * When provided, an open circuit between TEK5 and TEK6 indicates that

27、the line is not available for transmission. This may be caused either by a loopback of the leased line towards the central office or an out of service condition. TSB 18-B Page 2 THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) indu

28、stry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).