1、TIA TELECOMMUNICATIONS SYSTEMS BULLETIN l Cellular Digital Packet Data System Specification - Part 1022 Parameter Configuration Guidelines TSB-87- 1022 Reaffirmed August 9,2002 ODECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Teleconmiunications Industry Association represents the conmiuni
2、cations sector of NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtainin
3、g with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Sta
4、ndards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy.
5、 By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA Standards or Documents, in that they contain a compilation of engineering data
6、 or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be accep
7、table to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to review thi
8、s document every five years, but it maybe revised and updated at any time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-4010, formulated under the cognizance of the TIA TR-45.6 Subcommittee on Adjunc
9、t Wireless Packet Data Technology.) This Document was reaffirmed by the Telecommunications Industry Association on August 9,2002. Published by OTELECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to cur
10、rent Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1 -800-854-7 179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search-n-order .ch All rights reserved Printed
11、 in U.S.A. NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and claims copyright
12、to the document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.or
13、Zr/standards/sfZr/engineering manual.ch. TIAS function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE OF CONTENTS OF
14、 THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (“IPR), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED TO TIAS A
15、TTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDI
16、NG WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WAR
17、RANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCL
18、UDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN
19、 IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. N N O I P- r m VJ c TIAIEIA TELECOMMUN ICATIONS SYSTEMS BULLETIN Cellular Digital P
20、acket Data I System Specification = Part 1022 Parameter Configuration Guidelines I DECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION TYT3 lhe -nk4cm inaprir hsaoctillmr*b lbe Ebrrmlc IiimMs kJccuO0 lNS7RY ASSCMTIoIy NOTICE WEIA Engineering Standards and Publications are designed to serve the pub
21、lic interest through eliminating misunderstandings between manufacturers and purchasers, facilitating inkrchangeabdity and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Pu
22、blications shall not in any respect preclude any member or nonmember of TiA/EIA from manufacturing or selling products not confoming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than WEIA members, whether t
23、he standard is to be used either domestically or internationally. Standards, Publications and Buletins are adopted by EL4 in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TL4lET.A does not assume any liability to any patent owner, nor does it assume
24、any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from WEIA Standards or Interim Standards, in that they contain a compilation of engineering data or information useful to the technical community, and represent approaches to goo
25、d engineering pmctices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring o
26、ther approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technolo
27、gy, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 4010, formulated. under the cognizance of the TIA TR-45.6 Adjunct Wireless Packet Data Standards Subcommittee) Published by %ECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Depart
28、ment 2500 Wilson Boulevard Arlington, VA 22201 PRICE Please refer to the current Catalog of EIA, JEDEC and TIA STANDARDS and ENGINEERING PUBLICATIONS International (303397-7956) or call Global Engineering Documents, USA and Canada (1-800-854-7179) Ail rights reserved Printed in U.S.A. STD-EIA TSB87-
29、1022-ENGL 1997 H 3234b00 ObO1L-lb0 933 m TIAEIATSB-87-1 O22 . PART 1022 Table of Contents O Foreword 1022-iu Document Structure .lo2 2.111 . 0.1 1 Introduction 1022-1 2 PhysicalLayer 1022-1 2 . I Max-Channel-Time 1022-1 2.1.1 Configuration . 1022-2 3 Medium Access Control 1022-2 3.1 Min-Idle-Time 10
30、22-2 3.1.1 Configuration . 1022-2 3.2 Max-Blocks . 1022-2 3.2.1 Configuration . 1022-3 3.3 Area Color Code . 1022-3 3.3.1 Configuration . 1022-3 3.4 Cell Group Color Code 1022-3 3.4.1 Configuration . 1022-4 Mobile Data Link Protocol 1022-4 4.1 Acknowledgment Delay Timer 1022-4 4.1.1 Configuration .
31、1022-4 4.2 TE1 Notification Timer 1022-5 4.2.1 Configuration . 1022-5 4.3 TE1 Notification Attempts 1022-5 4.3.1 Configuration . 1022-5 4 5 Subnetwork Dependent Convergence Protocol (SNDCP) . 1022-6 Data Compression Parameters : 1022-6 5.1 5.1.1 Configuration . 1022-6 6 Radio Resource Management 102
32、2-6 6.1 ChannelLayoff-Time . 1022-6 6.1.1 Configuration . 1022-7 4.2.1 Configuration . 1022-7 6.3.1 Configuration . 1022-7 6.2 Cell Identifier 1022-7 6.3 Channel Stream Identifier 1022-7 _ 1022-i TIAEImSB-87-1022 Table of Contents 6.4 Channel Stream Identification Message Distribution Interval 1022-
33、7 6.5 6.6 6.7 6.8 6.4.1 Configuration . 1022-7 Cell Configuration Message Distribution Interval 1022-8 6.5.1 Configuration . 1022-8 Channel Quality Parameters Message Distribution Interval 1022-8 6.6.1 Configuration . 1022-9 Channel Access Parameter Message Frequency . 1022-9 6.7.1 Configuration . 1
34、022-9 BLER Average Time . 1022-10 Configuration 1022- 1 0 6.9 BLER Threshold 1022- 1 0 6.9.1 Configuration 1022-10 6.10 RSSI Average Time 1022-10 6.10.1 Configuration 1022-10 6.1 1 RSSI Scan Time . 1022-1 1 6.1 i . 1 Configuration 1022- 1 1 6.12 RSSI Scan Delta . 1022-1 1 6.12.1 Configuration 1022-1
35、 1 Mobile Network Location Protocol 1022-11 Holding Timer 1022- 1 1 7.1.1 Configuration 1022-12 ASN/ARN Update . 1022- 12 Mobile Network Registration Protocol . 1022-12 8.1 Holding Timer 1022-12 8.1.1 Configuration 1022-13 Configuration Timer . 1022- 13 8.2.1 Configuration 1022-13 Registration Seque
36、nce Count . 1022- 13 6.8.1 7 7.1 7.2 8 8.2 8.3 8.3.1 Usage 1022-14 10224 STD*EIA TSB87-1022-ENGL 1777 3234b00 Ob014b2 70b Foreword TIAEIAKSB-87-1 O22 PART 1022 Parameter Configuration Guidelines O Foreword This foreword is not part of this Telecommunications Systems Bulletin. This Telecommunications
37、 Systems Bulletin has been developed by Subcommittee TR-45.6, and contains information which may be useful to implementors of systems compliant with TSB-87, “Cellular Digital Packet Data System Specification,“ or its derivatives. This document contains significant portions of material originally sub
38、mitted by the Cellular Digital Packet Data Forum Inc. CDPD is a technology intended to provide packet data networking services to mobile hosts. The media used to provide these services consists of radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service. o. 1 Document S
39、tructure This Telecommunications Systems Bulletin is published as a series of Parts. Each Part contains information pertaining to one aspect of the system. The functional structure of this TSB is as follows: o Part 1000 to Part 1999-Guidelines for Service Providers These Parts are informative and di
40、scuss non-CDPD specific entities (such as Intermediate Systems), support services (such as directory 1022-iii TlAEIA/TSB-87-1 O22 Parameter Configuration Guidelines services, accounting summary and settlement procedures, authentication, etc.), value-added services (such as subscriber location) and S
41、ervice Provider issues (such as an interoperability test plan overview and parameter configuration). Part 1000 contains the detailed listing of all Parts of this TSB. Part 2000 to Part 2999-Guidelines for Manufacturers of CDPD equipment These Parts are informative and.discuss such concerns as CDPD-s
42、pecific entities (such as Mobile End Systems (M-ESs), Mobile Data Base Stations (MDBSs) and Mobile Data Intermediate Systems (MD-ISS), external interfaces (such as that between the Subscriber Unit (SU) and the Subscriber Identity Module (SIM) and multicasts from the perspective of each of the partic
43、ipating entities. Part 3000 to Part 3999-Guidelines for the CDPD Network Information Center (NIC). These Parts are informative and describe the issues and procedures which must be addressed by an agency serving as a NIC on behalf of the CDPD community. o o 1022-iV Introduction TlAEIAITCB-87-1 O22 -
44、PART 1022 Parameter Configuration Guidelines 1 Introduction 2 The purpose of this Part is to recommend settings for many of the configurable parameters of CDPD. It should be noted that this Part constitutes a recommendation but not a requirement for CDPD Service Providers. Because it is a recommenda
45、tion, this Part does not purport to cover all configurable parameters. Physical Layer 2.1 This Section discusses CDPD Physical Layer parameters. Max-C hannel-Time If the RF channel is shared with other cellular transmissions, then the MDBS shall relinquish the RF channel after a period of time. This
46、 time period is defined as the MAX-CHANNEL-TIME. The MAX-CHANNEL-TIME is defined in IS-732-401. .- 1022-1 TWEIAlTSB-87-1022 Parameter Configuration Guidelines 2.1.1 Configuration The default MAX-CHANNEL-TIME is 1 minute. The MAX-CHANNEL-TIME must be set to a value that operates in concert with the u
47、nderlying cellular voice infrastructure. 3 Medium Access Control 3.1 This Section discusses CDPD MAC protocol parameters. Mi n-l d le-T i me 3.1.1 3.2 The CDPD Airlink is a shared resource where multiple M-ESs contend for reverse channel capacity. To prevent any M-ES from blocking other M-ESs attemp
48、ting to access the CDPD channel, the Medium Access Control mechanism prevents any single M-ES from continuously transmitting on the reverse channel. This is accomplished through the definition of the DSMA state machine procedures and the MIN-IDLE-TIME and MAX-BLOCKS parameters (see Section 3.2). The
49、 MIN-IDE-TIME defines the length of time, in microslots, where an M-ES must wait after entering the Idle state before it is allowed to transmit on the reverse channel. The MIN-IDLETIME parameter is defined in IS-732-402. By the MAC protocol definition, at the end of each transmission, the M-ES must cease transmission and wait a minimum of seven microslots in the Decode Wait state before entering the Idle state. This means that the MIN-IDLE-TIME is the number of microslots an M-ES must remain quiet in addition to the mandatory seven microslots. Configuration The default
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1