1、TELECOMMUNICATIONS SYSTEMS BULLETIN I Cellular Digital Packet Data System Specification - Part 201 1 Mobile Data Base Station TSB-87-2011 Reaffirmed August 9,2002 ODECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Teleconmiunications Industry Association represents the conmiunications sector
2、 of NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum
3、 delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Pub
4、lications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such actio
5、n, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA Standards or Documents, in that they contain a compilation of engineering data or informatio
6、n useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or h
7、ave been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to review this document eve
8、ry five years, but it maybe revised and updated at any time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-4012, formulated under the cognizance of the TIA TR-45.6 Subcommittee on Adjunct Wireless Pac
9、ket Data Technology.) This Document was reaffirmed by the Telecommunications Industry Association on August 9,2002. Published by OTELECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog o
10、f TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1 -800-854-7 179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search-n-order .ch All rights reserved Printed in U.S.A. NOT
11、ICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and claims copyright to the documen
12、t pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.orZr/standards/s
13、fZr/engineering manual.ch. TIAS function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE OF CONTENTS OF THIS DOCUMENT
14、 MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (“IPR), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED TO TIAS ATTENTION, A ST
15、ATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIM
16、ITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARD
17、ING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT
18、LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF
19、 THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. _ STD=EIA TSB87-20LL-ENGL 1997 3234600 Ob00933 522 TIAIEIA TELECOMMUNICATIONS SYSTEMS BULLETIN Ce
20、llular Digital Packet Data System Specification = Part 2011 Mobile Data Base Station TSB87-2011 DECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION STD=EIA TSB7-2011-ENGL I1777 m 3234b00 Ob00934 4b7 m NOTICE TINEIA Engineering Standards and Publications are designed to serve the public interest th
21、rough eliminating misunderstandings between manufacturers and purchasers, facilita6ng interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications sha
22、ll not in any respect preclude any member or nonmember of WEIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than WEiA members, whether the standard is t
23、o be used either domestically or internationally. Standards, Publications and Buleths are adopted by EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, WEIA does not assume any liability to any patent owner, nor does it assume any obligation whatev
24、er to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIAIELA Standards or Interim Standards, in that they contain a compilation of engineering data or information useful to the technical community, and represent approaches to good engineering prac
25、tices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches t
26、o the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technology, industry prac
27、tice, or government regulations, or for other appropriate reasons. (From Project No. 4012, formulated under the cognizance of the TIA TR-45.6 Adjunct Wireless Packet Data Standards Subcommittee) Published by -COMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Bo
28、ulevard Arlington, VA 22201 PRICE: Please refer to the current Catalog of EIA, JEDEC and TIA STANDARDS and ENGINEERING PUBLICATIONS International (303-397-7956) or call Global Engineering Documents, USA and Canada (1-800-854-7179) ,All rights reserved printed in U.S.A. STD-EIA TSB87-ZOLL-ENGL 1997 m
29、 3234600 Ob00935 3T5 m TlAEIAITSB-87-2011 PART 2011 Table of Contents O Foreword 2011-iii O . 1 Document Structure 20 1 1-111 . . 1 Overview . 2011-1 2 Functional Description 2011-1 MDLP Relay Function . 201 1-2 2.1.1 Channel Stream Connectivity 201 1-2 2.1.2 Channel Stream Creation 201 1-3 2.1.3 Fl
30、ow Control . 201 1-3 Radio Resource Management . 20 1 1-3 Network Management Support 201 1-4 Functional and Communications Profiles 2011-4 2.1 2.2 2.3 3 201 1-i STDDEIA TSB87-2011-ENGL 1997 3234600 0600936 231 Foreword TIAEIA.fi3B-87-2011 PART 2011 Mobile Data Base Station O Foreword O. 1 This forew
31、ord is not part of this Telecommunications Systems Bulletin. This Telecommunications Systems Bulletin has been developed by Subcommittee TR-45.6, and contains information which may be useful to implementors of systems compliant with TSB-87, ”Cellular Digital Packet Data System Specification,” or its
32、 derivatives. This document contains significant portions of material originally submitted by the Cellular Digital Packet Data Forum Inc. CDPD is a technology intended to provide packet data networking services to mobile hosts. The media used to provide these services consists of radio channels typi
33、cally used for Advanced Mobile Phone System (AMPS) cellular service. Document Structure This Telecommunications Systems Bulletin is published as a series of Parts. Each Part contains information pertaining to one aspect of the system. The functional structure of this TSB is as follows: o Part 1000 t
34、o Part 1999-Guidelines for Service Providers These Parts are informative and discuss non-CDPD specific entities (such as Intermediate Systems), support services (such as directory .- 20114ii Previous page is blank - STDmEIA TSB87-20LL-ENGL 1997 3234600 Ob00937 It78 = TIA/EIA/TCB-87-2011 Mobile Data
35、Base Station services, accounting summary and settlement procedures, authentication, etc.), value-added services (such as subscriber location) and Service Provider issues (such as an interoperability test plan overview and parameter configuration). Part 1000 contains the detailed listing of all Part
36、s of this TSB. Part 2000 to Part 2999-Guidelines for Manufacturers of CDPD equipment These Parts are informative and discuss such concerns as CDPD-specific entities (such as Mobile End Systems (M-ESs), Mobile Data Base Stations (MDBSs) and Mobile Data Intermediate Systems (MD-ISS), external interfac
37、es (such as that between the Subscriber Unit (SU) and the Subscriber Identity Module (SIM) and multicasts from the perspective of each of the participating entities. Part 3000 to Part 3999-Guidelines for the CDPD Network Information Center (NIC). These Parts are informative and describe the issues a
38、nd procedures which must be addressed by an agency serving as a NIC on behaif of the CDPD community. o o 201 l-iv Overview TlAIEIAiTSB-87-2011 PART 2011 Mobile Data Base Station 1 Overview 2 This Part provides an architectural description of the Mobile Data Base Station (MDBS) and the role that it p
39、lays in the CDPD Network. Profiles are provided for the interfaces between the MDBS and other components of the CDPD Network. Functional Description The MDBS is the stationary network component with responsibility for interactions across the Airlink Interface. The primary role of the MDBS is to rela
40、y data between the Mobile End Systems (M-ESs) and the Mobile Data Intermediate System (MD-IS). On the airlink side, the MDBS manages communications across the radio channels. The logical medium that connects the MDBS to the set of M-ESs listening to a particular RF channel at any given time is calle
41、d a channel stream. The channel stream may be thought of as a pair of point-to- multipoint channels. In the forward direction, MDBS transmissions are received by all M-ESs. In the reverse direction, the MDBS receives the transmissions of a transmitting M-ES. An M-ES is unable to receive the transmis
42、sions of another M-ES directly. - 2011-1 - STD=EIA TSBB7-2011-ENGL 1997 3234b00 Ob00939 T40 TIAEIAKSB-87-2011 Mobile Data Base Station The RF channel that is used to carry a channel stream may be changed from time to time. This process is known as channel hopping. Normally, an M-ES shall track a cha
43、nnel hop, so that it remains on the same channel stream. In some circumstances, an M-ES may fail to track a channel hop and may acquire a different channel stream after a channel hop. In addition, a moving M-ES may acquire a channel stream in a different cell from time to time. The procedure is call
44、ed cell transfer. On the land side, the MDBS relays messages to the MD-IS. The communications medium between the MDBS and the MD-IS is unspecified and may be any kind of data communications network. The interface between the MDBS and the MD-IS is defined as either a set of IS0 Transport Protocol (TP
45、4) connections or a set of Permanent Virtual Circuits (PVCs) under Frame Relay. Each connection or PVC relays the traffic for a single channel stream. The MDBS is capable of controlling CDPD transmissions for one or more channel streams across one or more cells. The MDBS is responsible for: o MDBS r
46、elay functions o o Relaying data between the M-ESs and the MD-ISS Arbitrating M-ES access to the Airlink Interface via a Medium Access Control (MAC) protocol. Ensuring the CDPD transmissions do not interfere with non-CDPD transmissions on the same RF channels Supplying configuration data to the M-ES
47、s to allow them to maintain connectivity to the network in the face of channel hops and cell transfers Monitoring and adjusting the transmit power levels of the M-ESs. o Radio Resource Management functions o o o Accepting and implementing management commands from the Network Management System (NMS).
48、 o 2.1 MDLP Relay Function The relay function shall be supplied by the Mobile Data Link Protocol (MDLP) Relay element. This is an Interworking function that shall accept MDLP frames, as defined in IS-732-403, across the MAC interface defined in IS-732-402, and shall transfer them in sequence across
49、the interface to the MD-IS (and vice versa). 2.1.1 Channel Stream Connectivity For each channel stream supported by the MDBS, a separate instance of the CDPD Airlink MACPhysical subprofde and a separate instance of either the IS0 COTS-CLNS subprofile or the PVC-Frame Relay subprofde are required. These subprofiles are defined in IS-732-3121. These define a 2011-2 STD-EIA TSB87-20Ll-ENGL 1997 D 3234600 0600940 762 - Functional Description TIAIEIAKSB-87-2011 channel stream and a link between the MDBS and MD-IS, using mapping procedures defin
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1