TIA TSB-88 3-D-2013 WIRELESS COMMUNICATIONS SYSTEMS PERFORMANCE IN NOISE AND INTERFERENCE-LIMITED SITUATIONS Part 3 Recommended Methods for Technology Independent Performance Verif.pdf

1、 TSB-88.3-D October 2013WIRELESS COMMUNICATIONS SYSTEMS PERFORMANCE IN NOISE AND INTERFERENCE-LIMITED SITUATIONS Part 3: Recommended Methods for Technology Independent Performance Verification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through elimina

2、ting misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not

3、 in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. S

4、tandards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Stan

5、dard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its u

6、se. (From Project No. TIA-PN-88.3-D, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.18 Subcommittee on Wireless Systems Compatibility- Interference and Coverage). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assura

7、nce that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intelle

8、ctual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holde

9、r thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are inst

10、ead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or it

11、s contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such referen

12、ce consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs poli

13、cy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a c

14、laim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document

15、. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RI

16、GHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED

17、 TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

18、DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS

19、 A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA TSB-88.3-D i TABLE OF CONTENTS FOREWORD vi INTRODUCTION vii 1. SCOPE . 1 1.1. The TSB-88 Series 1 1.2. TSB-88.3-D . 3 2. REFERENCES 4 3. DEFINITIONS AND ABBREVIATI

20、ONS . 5 3.1. Definitions . 5 3.2. Abbreviations 12 4. TEST METHODS 14 5. PERFORMANCE CONFIRMATION 17 5.1. Validated Service/Covered Area Reliability . 19 5.2. Determination of Number of Test Tiles (Outdoor only) 19 5.2.1. Estimate of Proportions . 19 5.3. Pass/Fail Test Criteria . 21 5.3.1. The “Gre

21、ater Than” Test 21 5.3.2. The “Acceptance Window” Test . 21 5.4. Confidence 21 5.4.1. Confidence Level . 21 5.4.2. Confidence Interval 21 5.5. Size Constraints Assessing and quantifying the impact of new narrowband/bandwidth efficient digital and analog technologies on existing analog and digital te

22、chnologies; Assessing and quantifying the impact of existing analog and digital technologies on new narrowband/bandwidth efficient digital and analog technologies; Addressing migration and spectrum management issues involved in the transition to narrowband/bandwidth efficient digital and analog tech

23、nologies. This includes developing solutions to the spectrum management and frequency coordination issues resulting from the narrow banding of existing spectrum considering channel spacing from 30 and 25 kHz to 15, 12.5, 7.5, and 6.25 kHz; Information on new and emerging Land Mobile bands such as th

24、e 700, 800 and 900 MHz bands; Preliminary information on narrowband and wideband data; 25, 50, 100 and 150 kHz channel bandwidths; and Address the methodology of minimizing intra system interference between current or proposed Noise Limited Systems in spectral and spatial proximity to Interference L

25、imited Systems. The TSB-88 series of documents was prepared partially in response to specific requests from three particular user organizations: the Association of Public Safety Communications Officials, International (APCO), the Land Mobile Communications Council (LMCC) and the National Coordinatio

26、n Committee (NCC).1This document, TSB-88.3-D is intended to address verification within the context described above. 1The National Public Safety Telecommunications Council (NPSTC) has assumed the responsibilities of the NCC which has been disbanded. TIA TSB-88.3-D 1 Wireless Communications Systems P

27、erformance in Noise and Interference-Limited Situations Part 3: Recommended Methods for Technology-Independent Performance Verification 1. SCOPE 1.1. The TSB-88 Series The TSB-88 series of bulletins provides guidance on the following areas: Establishment of standardized methodology for modeling and

28、simulating various and different bandwidth efficient technologies operating in a post “Refarming“ environment or in new frequency band allocations; Recommended databases and propagation models that are available for improved results from modeling and simulation; Establishment of a standardized metho

29、dology for empirically confirming the performance of various and different bandwidth efficient systems operating in a post “Refarming“ environment or in new frequency band allocations, and; Combining the modeling, simulation and empirical performance verification methods into a unified family of dat

30、a sets or procedures which can be employed by frequency coordinators, systems engineers, system operators or software developers; The purpose of these documents is to define and advance a standardized methodology to analyze compatibility of different technologies from a technology neutral viewpoint.

31、 They provide recommended technical parameters and procedures from which automated design and spectrum management tools can be developed to analyze proposed configurations that can temporarily exist during a “rebanding” migration process as well as for longer term solutions involving different techn

32、ologies. As wireless communications systems evolve, it becomes increasingly complex to determine compatibility between different types of modulation, different channel bandwidths, different operational protocols, different operational geographic areas, and application usage. Thus, spectrum managers,

33、 system designers and system maintainers have a common interest in utilizing the most accurate and repeatable modeling and simulation capabilities to determine likely system performance. With increasing spectrum allocation complexity, both in terms of modulation techniques offered, channel bandwidth

34、s available and in the number of entities involved in wireless TIA TSB-88.3-D 2 communications systems, a standardized approach and methodology is needed for the modeling and simulation of these systems, in all frequency bands of interest. In addition, after deployment, validation or acceptance test

35、ing is often an issue subject to much debate and uncertainty. Long after a system is in place and optimized, future interference dispute resolution demands application of an industry accepted and standardized methodology for assessing system performance and interference. These documents contain reco

36、mmendations for both public safety and non-public safety performance that ought to be used in the modeling and simulation of these systems. These documents also satisfy the desire for a standardized empirical measurement methodology that is useful for routine proof-of-performance and acceptance test

37、ing and in dispute resolution of interference cases that are likely to emerge in the future. To provide this utility necessitates that specific manufacturers define various performance criteria for the different capabilities and their specific implementations. Furthermore, sufficient reference infor

38、mation is provided so that software applications can be developed and employed to determine if the desired system performance has been realized. Wireless system performance can be modeled and simulated with the effects of single or multiple potential distortion sources taken into account as well as

39、the defined performance parameters and verification testing. These include: Performance parameters Co-channel users Off-channel users Internal noise sources External noise sources Equipment non-linearity Transmission path geometry and transmission loss modeling Delay spread and differential signal p

40、hase Over the air and network protocols Performance verification Predictions of system performance can then be evaluated based on the desired RF carrier versus the combined effects of single or multiple performance degrading sources. Performance is then based on a faded environment to more TIA TSB-8

41、8.3-D 3 accurately simulate actual usage considering all the identified parameters and potential degradation sources. It is anticipated that these documents will serve as a recommended best practices reference for developers and suppliers of land mobile communications system design, modeling, simula

42、tion and spectrum management software and automated tools. 1.2. TSB-88.3-D This document, Part 3 of TSB-88, addresses recommended system verification testing and identification of interference sources for narrowband systems within the context described in 1.1, limited to frequencies below 1 GHz. TIA

43、 TSB-88.3-D 4 2. REFERENCES This Telecommunications System Bulletin contains only informative information. There may be references to other TIA standards which contain normative elements. These references are primarily to indicate the methods of measurement contained in those documents. At the time

44、of publication, the edition indication was valid. All standards are subject to revision, and parties to agreements based on this document are encouraged to investigate the possibility of applying the most recent edition of the standard indicated in Section 3. ANSI and TIA maintain registers of curre

45、ntly valid national standards published by them. TIA TSB-88.3-D 5 3. DEFINITIONS AND ABBREVIATIONS There is a comprehensive Glossary of Terms, Acronyms, and Abbreviations listed in Annex-A of TIA TSB-102. In spite of its size, numerous unforeseen terms still may have to be defined for the Compatibil

46、ity aspects. Items being specifically defined for the purpose of this document are indicated as (New). All others will be referenced to their source as follows: ANSI/IEEE 100-1996 Standard Dictionary IEEE TIA-603-D 603 TSB-102- B 102/A TIA/EIA-102.CAAA-C 102.CAAA TIA/EIA-102.CAAB-C 102.CAAB Recommen

47、dation ITU-R P.1407-4 ITU3 Report ITU-R M.2014 ITU8 TIA -845-B 845 TSB-902-A 902 TIA-902.CAAB-A 902.CAAB TIA-902.CBAB 902.CBAB TSB-88.1-D 88.1 TSB-88.2-D 88.2 The preceding documents are referenced in this bulletin. At the time of publication, the editions indicated were valid. All such documents ar

48、e subject to revision, and parties to agreements based on this document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated above: 3.1. Definitions For the purposes of this document, the following definitions apply: ACIPR Adjacent Channel Int

49、erference Protection Ratio Same as Offset Channel Selectivity 603 ACP Adjacent Channel Power: The energy from an adjacent channel transmitter that is intercepted by prescribed bandwith, relative to the power of the emitter. Regulatory rules determine the measurement bandwidth and offset for the adjacent channel. ACP = 1/ ACPR TIA TSB-88.3-D 6 ACPR Adjacent Channel Power Ratio: The ratio of the total power of a transmitter