1、 TIA STANDARD Multimedia Messaging Service (MMS) Media Formats and Codecs for cdma2000 Spread Spectrum Systems - Addendum 1 TIA-1011-1 (Addendum to TIA-1011) January 2007 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industrie
2、s Alliance Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misund
3、erstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any res
4、pect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards an
5、d Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does n
6、ot purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From P
7、roject No. 3-0112-AD1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or
8、 any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and publi
9、shed pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of
10、 IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or
11、 practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards
12、 (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of a
13、ny other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of
14、IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise in
15、vestigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PUR
16、POSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, R
17、ULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or netwo
18、rking permitted without license from IHS-,-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES F
19、OR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF TH
20、E USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 PREFACE 1 Thi
21、s document defines content types, media formats and codecs for the non-real time Multimedia 2 Messaging Service (MMS) per 1. 3 NOTE: cdma2000is a registered trademark of the Telecommunications Industry Association (TIA 4 USA). 5 Copyright Telecommunications Industry Association Provided by IHS under
22、 license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 2 NOTES 1 1. The following verbal forms are used: “shall” and “shall not” identify requirements to be followed 2 strictly to conform to the standard and from which no deviation is permitted
23、. “Should” and 3 “should not” indicate that one of several possibilities is recommended as particularly suitable, 4 without mentioning or excluding others; that a certain course of action is preferred but not 5 necessarily required; or that (in the negative form) a certain possibility or course of a
24、ction is 6 discouraged but not prohibited. “May” and “need not” indicate a course of action permissible 7 within the limits of the standard. “Can” and “cannot” are used for statements of possibility and 8 capability, whether material, physical, or causal. 9 2. Footnotes appear at various points in t
25、his specification to elaborate and to further clarify items 10 discussed in the body of the specification. 11 3. Unless indicated otherwise, this document presents numbers in decimal form. 12 Binary numbers are distinguished in the text by the use of single quotation marks. In some 13 tables, binary
26、 values may appear without single quotation marks if table notation clearly specifies 14 that values are binary. The character x is used to represent a bit of unspecified value. For 15 example xxx00010 represents any 8-bit binary value such that the least significant five bits 16 equal 00010. 17 Hex
27、adecimal numbers (base 16) are distinguished in the text by use of the form 0xhh where 18 hh represents a string of hexadecimal digits. For example, 0x2fa1 represents a number 19 whose binary value is 0010111110100001 and whose decimal value is 12193. Note that the 20 exact number of bits in the bin
28、ary representation of a hexadecimal number strictly depends upon 21 the implementation requirements for the variable being represented. 22 4. “Base station” refers to the functions performed on the fixed network, which are typically 23 distributed among a cell, a sector of a cell, and a mobile commu
29、nications switching center. 24 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 3 CONTENTS 1 NOTES2 2 1 Introduction and Scope 5 3 2 References .6 4 3 Definitions and
30、abbreviations .8 5 3.1 Definitions 8 6 3.2 Abbreviations .8 7 4 Media formats.10 8 4.1 Text 10 9 4.2 Speech .10 10 4.3 Audio 11 11 4.4 Synthetic audio.11 12 4.5 Still Image 11 13 4.6 Bitmap graphics .11 14 4.7 Video 12 15 4.8 Vector graphics 12 16 4.9 File Format for Dynamic Media12 17 4.10 Media Sy
31、nchronization and Presentation Format13 18 A ANNEX A. MIME CONFORMANCE (Informative) .14 19 A.1 Scope .14 20 A.1.1 Applicability14 21 A.1.2 Purpose .14 22 A.1.3 Relation to SMIL15 23 A.2 MIME Type Rules.15 24 A.2.1 The text major type16 25 A.2.1.1 Receiving Text 16 26 A.2.1.2 Sending Text.16 27 A.2.
32、2 Non-text parts16 28 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 4 A.2.2.1 Receiving non-text parts .16 1 A.2.2.2 Sending non-text parts17 2 A.2.3 Content-dispos
33、ition17 3 A.2.3.1 Receiving content-disposition .17 4 A.2.3.2 Sending content-disposition17 5 A.2.4 Multiparts.17 6 A.2.4.1 Receiving multiparts17 7 A.2.4.2 Sending multiparts 17 8 A.2.5 The “Message” Major Type .18 9 A.2.5.1 Receiving Message Major Type18 10 A.2.5.2 Sending Message Major Type 18 11
34、 12 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 5 1 Introduction and Scope 1 This document specifies the media types, formats and codecs for the MMS within the 3G
35、PP2 system. The 2 scope of the present document extends to codecs for speech, audio, video, still images, bitmap graphics, 3 and other media in general, as well as scene description, multimedia integration and synchronization 4 schemes. 5 Copyright Telecommunications Industry Association Provided by
36、 IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 6 2 References 1 The following documents contain provisions, which through reference in this text, constitute 2 provisions of the present document. 3 References are either specifi
37、c (identified by date of publication, edition number, 4 version number, etc.) or non-specific. 5 For a specific reference, subsequent revisions do not apply. 6 For a non-specific reference, the latest version applies. In the case of a reference to 7 a 3GPP2 document, a non-specific reference implici
38、tly refers to the latest version of 8 that document in the same Release as the present document. 9 1 3GPP2 S.R0064: “Multimedia Messaging Service (MMS); Stage 1 Requirements“ . 10 2 The Unicode Consortium: “The Unicode Standard“, Version 4.0 (Reading, MA, Addison-11 Wesley, 2003. ISBN 0-321-18578-1)
39、, as amended by Unicode 4.0.1. 12 3 ANSI INCITS 4-1986 (R2002): “Information Systems - Coded Character Sets - 7-Bit 13 American National Standard Code for Information Interchange (7-Bit ASCII) “. 14 4 ISO/IEC 8859-1:1998: “Information technology - 8-bit single-byte coded graphic 15 character sets -
40、Part 1: Latin alphabet No. 1“. 16 5 IETF RFC 2279: “UTF-8, a transformation format of ISO 10646“. 17 6 3GPP TS 23.038: “Alphabets and language-specific information”. 18 7 ITU-T Recommendation T.81 (09/92): “Information technology - Digital compression and 19 coding of continuous-tone still images -
41、Requirements and guidelines“. 20 8 “JPEG File Interchange Format“, Version 1.02. 21 9 ITU-T Recommendation H.263 (02/98): “Video coding for low bit rate communication“. 22 10 ISO/IEC 14496-2 (2004): “Information technology - Coding of audio-visual objects - Part 23 2: Visual“. 24 11 CompuServe Incor
42、porated: “GIF Graphics Interchange Format: A Standard defining a 25 mechanism for the storage and transmission of raster-based graphics information“, 26 Columbus, OH, USA, 1987. 27 12 CompuServe Incorporated: “Graphics Interchange Format (Version 89a)“, Columbus, OH, 28 USA. 29 Copyright Telecommuni
43、cations Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 7 13 IETF RFC 2083: “PNG (Portable Networks Graphics) Specification Version 1.0“. 1 14 ISO/IEC 14496-3: 2001: “Information technology - Cod
44、ing of audio-visual objects - Part 2 3: Audio“. 3 15 W3C: “Scalable Vector Graphics (SVG) 1.1 Specification“. 4 16 W3C: “Mobile SVG Profiles: SVG Tiny and SVG Basic“. 5 17 IETF RFC 2046: “Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types“. 6 18 MIDI Manufacturers Association: “Scala
45、ble Polyphony MIDI Specification, RP-34“, Los 7 Angeles, CA, 2002. 8 19 MIDI Manufacturers Association: “Scalable Polyphony MIDI Device 5-to-24 Note Profile 9 for 3GPP, RP-35“, Los Angeles, CA, 2002. 10 20 MIDI Manufacturers Association: “Standard MIDI Files 1.0“, RP-001, “The Complete MIDI 11 1.0 D
46、etailed Specification, Document Version 96.1“, Los Angeles, CA, February 1996. 12 21 3GPP TS 26.071: “AMR speech CODEC; General description“. 13 22 TIA-1015 : “File Formats for Multimedia Services for cdma2000 Spread Spectrum 14 Systems“. 15 23 TIA-733-A: “High Rate Speech Service Option 17 for Wide
47、band Spread Spectrum 16 Communication Systems“. 17 24 OMA: “MMS Conformance Document 1.2“. 18 25 IETF RFC 3676: “The Text/Plain Format and DelSp Parameters“. 19 26 IETF RFC 2045: “Multipurpose Internet Mail Extensions (MIME) Part One: Format of 20 Internet Message Bodies”. 21 27 IETF RFC 2048: “Mult
48、ipurpose Internet Mail Extensions (MIME) Part Four: Registration 22 Procedures”. 23 28 IETF RFC 2183: “Communicating Presentation Information in Internet Messages: The 24 Content-Disposition Header Field”. 25 29 3GPP2 X.S0016-200 “MMS Stage 2 Functional Description”. 26 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 1011-1 8 3 Definitions and abbreviations 1 3.1 Definitions 2 Fo
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1