TIA-102 BACA-B-2012 Project 25 Inter-RF Subsystem Interface Messages and Procedures for Voice Services Mobility Management and RFSS Capability Polling Services.pdf

1、TIA-102.BACA-B November 2012Project 25 Inter-RF Subsystem InterfaceMessages and Procedures for Voice Services, Mobility Management, and RFSS Capability Polling Services NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings b

2、etween manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude

3、 any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publication

4、s are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to

5、 address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TI

6、A-PN-102.BACA-B, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio TR-8.19 Subcommittee on Wireline System Interfaces). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Ple

7、ase refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDSAND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/All rights reserved Printed in U.S.A. NOTICE OF CO

8、PYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or

9、 go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyrightorTelecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee

10、of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issu

11、ed patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manua

12、l. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or

13、judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normati

14、ve References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements

15、 (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Enginee

16、ring Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent

17、applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, IN

18、CLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITI

19、ES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WI

20、TH THE CONTNTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF

21、PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF,

22、 AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-102.BACA-B iForeword(This foreword is not part of this standard.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding

23、(MOU) dated December, 1993. That MOU provides that APCO/NASTD/FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed by TR

24、8.19 (Wireline Interfaces) with inputs from the APCO Project 25 Interface Committee (APIC), the APIC ISSI Task Group, and TIA Industry members. The symbol “P25” or the wording “Project 25” appearing on the cover sheet of this document when published or in the title of any TIA-102 document or Telecom

25、munications Service Bulletin (TSB) referenced herein, that indicates the APCO/NASTD/FED Project 25 Steering Committee has adopted the document as part of the Standard. The appearance of the abbreviation “P25” or the wording “Project 25” on the cover sheet of this document or in the title of any docu

26、ment referenced herein does not limit the applicability of the information contained in this document to “P25” or “Project 25” implementations exclusively. This document is being published to provide technical information on the emerging digital techniques for Land Mobile Radio Service. This documen

27、t defines an Inter-RF Subsystem Interface (ISSI) supporting TIA-102 trunked voice, trunked mobility management, and RFSS capability polling services. The ISSI is the interface between Radio Frequency Subsystems (RFSSs) enabling relevant Project 25 user requirements to be satisfied (e.g., as describe

28、d in the Inter-RF Subsystem Interface Overview (TSB-102.BACC-B). Standardization efforts are planned to continue developing TIA standards defining compliance tests (e.g., measurement methods, performance recommendations, and interoperability tests) applicable to equipment implementing the TIA-102 IS

29、SI protocols defined in this and other related TIA standards.TIA-102.BACA-B iiPatent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by patent rights. By publication of this document no positio

30、n is taken with respect to the validity of those claims or any patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants des

31、iring to obtain such licenses. The following patent holders and patents have been identified in accordance with the TIA intellectual property rights policy: No patents have been identified. TIA shall not be responsible for identifying patents for which licenses may be required by this document or fo

32、r conducting inquiries into the legal validity or scope of those patents that are brought to its attention. Trademark Identification The following trademarks are referenced in this specification: IMBE is a trademark of Digital Voice Systems, Inc.11Use of the trademark identified in this standard is

33、not an endorsement by TIA. TIA-102.BACA-B iiiTABLE OF CONTENTS1. INTRODUCTION . 11.1 SCOPE 21.2 TERMINOLOGY . 31.3 DOCUMENT STRUCTURE . 31.4 DEFINITIONS . 41.5 ABBREVIATIONS . 81.6 REFERENCES . 111.6.1 Normative References 111.6.2 Informative References 132. OVERVIEW OF ARCHITECTURE AND PROTOCOL SUI

34、TE 152.1 ARCHITECTURE OVERVIEW 152.1.1 Call Models . 172.1.1.1 Call Models for LMR System 172.1.1.2 ISSI Call Models 192.1.2 Subsystem Topologies 212.1.3 Functional Model 242.1.3.1 Mobility Management 262.1.3.1.1 Unit Mobility Management 262.1.3.1.2 Group Mobility Management . 282.1.3.1.3 Mobility M

35、anagement for Supplementary Data . 302.1.3.1.4 Packet Data Mobility Management Function . 312.1.3.2 Call Control 332.1.3.2.1 Unit Call Control 342.1.3.2.1.1 Media Tree Topology for SU-to-SU Calls . 362.1.3.2.1.2 RTP resource management for SU-to-SU Calls . 372.1.3.2.1.3 RF resource management for SU

36、-to-SU Calls 372.1.3.2.1.4 Vocoder Mode Selection for SU-to-SU Calls . 372.1.3.2.2 Group Call Control . 372.1.3.2.2.1 Group Call Topology 392.1.3.2.2.2 Group Call RTP Resource Management 392.1.3.2.2.3 Group Call RF Resource Management . 402.1.3.2.2.4 Group Call Vocoder Mode Selection . 402.1.3.3 Med

37、ia processing . 402.1.3.3.1 Media Processing for SU-to-SU Calls 412.1.3.3.2 Media Processing for Group Calls 422.1.3.4 RFSS Service Capability Polling . 422.1.4 Service Access Point Model . 432.1.4.1 Mobility Management SAP 452.1.4.1.1 MM Registration Transaction . 482.1.4.1.2 MM Serving Deregistrat

38、ion Transaction 492.1.4.1.3 MM Home Deregistration Transaction . 502.1.4.1.4 MM Query Transaction 502.1.4.2 Call Control SAP . 512.1.4.2.1 CC Call Segment Setup Transaction . 522.1.4.2.2 CC Call Segment Teardown Transaction 532.1.4.2.3 CC Call Segment Modification Transaction . 532.1.4.3 Transmissio

39、n Control SAP . 542.1.4.3.1 TC Context Management Transactions . 562.1.4.3.2 TC Spurt Request/Decision Transaction . 562.1.4.3.3 TC Spurt Start Transaction . 572.1.4.3.4 TC Unstoppable Request Transaction . 572.1.4.3.5 TC Decision Timeout Transaction 572.1.4.3.6 TC Mute Transaction 572.1.4.3.7 TC Se

40、t Losing Audio Transaction 57TIA-102.BACA-B iv2.1.4.3.8 TC Audio Transaction 582.1.4.3.9 TC Spurt End Transaction 582.1.4.3.10 TC_Error Transaction . 582.1.4.4 RFSS Service Capability Polling SAP. 582.1.4.4.1 RP Query Transaction . 592.2 ISSI INTERNET PROTOCOL SUITE . 592.2.1 Lower Layers . 602.2.2

41、Network Layer . 612.2.2.1 Internet Protocol Version 4 (IPv4) 612.2.2.1.1 IPv4 Header Format 612.2.2.1.2 Header Field Definitions . 622.2.2.2 Internet Protocol Version 6 (IPv6) 632.2.3 Transport Layer . 632.2.3.1 User Datagram Header Format 632.2.3.2 Header Field Definitions 642.2.4 Application Layer

42、 652.3 ISSI DATA TRANSMISSION ORDER . 653. SIP MESSAGES AND PARAMETERS DEFINITION FOR ISSI . 673.1 PREAMBLE:GRAMMAR . 673.2 SIP TRANSPORT 673.3 REQUEST LINE CONSTRUCTION . 683.4 SIP URI AND RELATED ADDRESSING LOGIC . 683.4.1 General Characteristics of SIP URIs 683.4.1.1 ISSI Domain Names . 683.4.1.2

43、 ISSI Radical Names . 693.4.1.3 ISSI Parameters 753.4.2 Request URI formatting Summary . 793.5 SIP HEADER ENCODING . 813.5.1 Accept 833.5.2 Allow 843.5.3 Call-ID . 843.5.4 Contact 853.5.5 Content-Disposition . 873.5.6 Content-Length 873.5.7 Content-Type . 873.5.8 Cseq . 913.5.9 Expires . 913.5.10 Fr

44、om . 913.5.10.1 From Header Field for REGISTER, INVITE, CANCEL, ACK, and BYE 923.5.10.2 From Header Field for OPTIONS 923.5.10.3 From Header Field for MESSAGE 933.5.11 Max-Forwards 933.5.12 MIME-Version 933.5.13 Priority 933.5.14 Record-Route 943.5.15 Route . 983.5.16 To 1023.5.16.1 To Header Field

45、for REGISTER 1033.5.16.1.1 To field for SUID (a(ii) and SGID registration . 1033.5.16.1.2 To field for Group Supplementary Data Interest (a(i) . 1033.5.16.1.3 To field for FNE Group Supplementary Data Interest (c(i) . 1043.5.16.1.4 To field for FNE Unit Supplementary Data Interest (c(ii),c(iii) 1043

46、.5.16.1.5 To field for Group SD Monitoring Interest (b(i.1) 1043.5.16.1.6 To field for FNE Group SD Monitoring Interest (b(i.2) 1053.5.16.1.7 To field for Unit SD Monitoring Interest (b(ii), b(iii) . 1053.5.16.1.8 To field for PD SN Context Registration 1053.5.16.2 To Header Field for INVITE, CANCEL

47、, ACK, and BYE . 1053.5.16.3 To Header Field for OPTIONS 106TIA-102.BACA-B v3.5.16.4 To Header Field for MESSAGE 1073.5.17 Via . 1073.5.18 Warning 1083.6 STATUS-CODE AND REASON-PHRASE . 1153.7 SDP ANNOUNCEMENTS . 1153.7.1 SDP offer/answer usage 1153.7.2 SDP parameters encoding . 1183.7.2.1 Session-l

48、evel part . 1183.7.2.1.1 The protocol version field . 1183.7.2.1.2 The origin field . 1193.7.2.1.3 The session name field 1193.7.2.1.4 The time field 1203.7.2.1.5 The connection field . 1203.7.2.2 Media description part . 1203.7.2.2.1 The media announcement field . 1203.7.2.2.2 Attributes fields 121

49、3.7.3 SDP examples 1223.7.3.1 SDP Offer with Mutiple Vocoder Modes Being Offered . 1223.7.3.2 SDP Offer in Older RFSS Implementations . 1233.8 X-TIA-P25-ISSI BODY PARAMETERS . 1233.8.1 Group Service Profile attributes 1243.8.1.1 Access Permission (g-access). 1253.8.1.2 Announcement Group (g-agroup) 1253.8.1.3 Priority (g-pri) 1253.8.1.4 Emergency Capable (g-ecap) . 1263.8.1.5 Emergency Preemption (g-eprempt) 1263.8.1.6 RF Hang Time (g-rfhangt) . 1263.8.1.7 Confirmed Call Setup Time (g-ccsetupT) 1273.8.1.8 Interrupt Mode (g-intmode) . 1273.8.1.9 Group Security Level