TIA-102 BAJB-A-2014 Project 25 Tier 1 Location Services Specification.pdf

1、 TIA-102.BAJB-A (Revision of TIA-102.BAJB) November 2014Project 25 Tier 1 Location Services Specification ANSI/TIA-102.BAJB-A-2014 APPROVED: NOVEMBER 5, 2014 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manu

2、facturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member

3、 or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopt

4、ed by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address al

5、l safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this d

6、ocument are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-102.BAJB-A, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.5 Subcommittee on

7、 Signaling and Data Transmission). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PU

8、BLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy o

9、r soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are locat

10、ed at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified

11、 or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IP

12、R. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire i

13、nto, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does

14、not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulati

15、on, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty

16、or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and publis

17、hed pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance wit

18、h the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNIN

19、G THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTAT

20、IONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAM

21、AGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREAC

22、H OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT S

23、UCH LIMITATIONS. TIA-102.BAJB-A i Foreword (This foreword is not part of this document.) This document has been created in response to a request by the APCO/NASTD/FED1Project 25 Steering Committee as provided for in a Memorandum of Understanding (MOU) dated April 1992 and amended December 1993. The

24、MOU states APCO/NASTD/FED shall devise a Common System Standard for digital public safety communications (the Standard) commonly referred to as Project 25 or P25, and that TIA, as agreed to by the membership of the appropriate TIA Engineering Committee, will provide technical assistance in the devel

25、opment of documentation for the Standard. If the abbreviation “P25” or the wording “Project 25” appears on the cover sheet of this document when published that indicates the APCO/NASTD/FED Project 25 Steering Committee has adopted this document as part of the Standard. The appearance of the abbrevia

26、tion “P25” or the wording “Project 25” on the cover sheet of this document or in the title of any document referenced herein should not be interpreted as limiting the applicability of the information contained in any document to “P25” or “Project 25” implementations exclusively. This document provid

27、es a specification of the Tier 1 Location Services for TIA-102 Data Services. This document was developed by the TIA TR-8.5 Signaling and Data Transmission Subcommittee based on materials originated by the APCO Project 25 Interface Committee (APIC) Data Task Group (DTG). The 2ndedition (Revision A)

28、of this document defines messages and procedures for Tier 1 Location Services based on material originally published in TIA-102.BAJB and addresses several errata comments. This document cancels and replaces TIA-102.BAJB. The TIA makes no claims as to the applicability of the information contained in

29、 this document for any purpose although it is believed that the information will prove to be invaluable to manufacturers and operators of equipment based on the TIA-102 series of documents. Some aspects of the specifications contained in this document may not have been fully operationally tested; ho

30、wever, a great deal of time and good faith effort has been invested in the preparation of this document to ensure the accuracy of the information it contains. 1APCO/NASTD/FED is an abbreviation for the Association of Public-Safety Communications Officials (APCO), the National Association of State Te

31、chnology Directors (NASTD), and the various agencies of the Federal government (FED). TIA-102.BAJB-A ii Patent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by patent rights. By publication o

32、f this document, no position is taken with respect to the validity of those claims or any patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and c

33、onditions to applicants desiring to obtain such licenses. The following patent holders and patents have been identified in accordance with the TIA intellectual property rights policy: No patents have been identified TIA shall not be responsible for identifying patents for which licenses may be requi

34、red by this document or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. TIA-102.BAJB-A iii Table of Contents 1. Introduction . 1 1.1 Scope . 1 1.2 References . 1 1.2.1 Normative References . 1 1.2.2 Informative References 1 1.3 Acronyms a

35、nd Abbreviations 2 1.4 Definitions . 2 1.5 Conventions . 2 1.5.1 Terminology . 2 1.5.2 Symbols . 2 2. Location Services System Architecture . 3 2.1 Architectural Entities . 3 2.1.1 Location Information System (LIS) . 3 2.1.2 Location Service Host System (LSHS) 3 2.1.3 LMR System 4 2.1.3.1 SU . 4 2.1

36、.3.1.1 Obtaining Location Information . 4 2.1.3.1.2 Triggering Conditions . 4 2.1.3.1.3 Reporting Conditions 4 2.1.3.1.4 Providing Location Information . 5 2.1.3.2 FSR5 2.2 Architectures 5 2.2.1 Direct Data Configuration . 5 2.2.2 Repeated Data Configuration 6 2.3 Interfaces 6 2.3.1 LIS to SU . 6 2.

37、3.2 SU to SU and SU to FSR7 2.3.3 SU to LSHS . 7 3. Location Service Protocols . 8 3.1 Protocol Stacks . 8 3.1.1 Direct Data Configuration . 8 3.1.2 Repeated Data Configuration 8 3.2 Protocol Layers. 8 3.2.1 Um. 8 3.2.2 NMEA 0183 . 9 3.2.2.1 Tier 1 Location Service NMEA 0183 Sentences . 9 3.2.2.2 Op

38、tional Additional Data . 12 3.2.2.3 NMEA 0183 Example Message Sequence . 13 4. Protocol Performance 14 TIA-102.BAJB-A iv List of Figures Figure 1 Architectural Entities . 3 Figure 2 SU to SU Direct Data Configuration . 5 Figure 3 SU to SU Repeated Data Configuration . 6 Figure 4 Direct Data SU to SU

39、 . 8 Figure 5 Repeated Data SU to SU 8 Figure 6 NMEA 0183 Message Sequence 13 List of Tables Table 1 NMEA 0183 Sentences for Tier 1 Location Service 11 Table 2 NMEA 0183 GGA Sentence Minimum Required Fields 12 Table 3 Additional Data . 12 Table 4 Transmission Time For Location Data Packets 14 Table

40、5 Reliability For Update Interval. 14 Table 6 Users At 80% Reliability . 15 TIA-102.BAJB-A v Revision History Version Date Description Original 02/20/2009 Tier 1 Location Service messages and procedures to transport location information between endpoints in the Direct Data and Repeated Data configur

41、ations. Revision A 10/27/2014 This revision addresses errata comments and editorial clean up issues; adopted by the Project 25 Steering Committee October 23rdas part of the Project 25 Standard TIA-102.BAJB-A vi This page intentionally left blank TIA-102.BAJB-A 1 1. Introduction This Tier 1 Location

42、Services specification describes how TIA-102 series standards and other industry standards are used to provide a location reporting service for land mobile radio (LMR) systems. LMR Location Services are divided into two tiers, as described in the Location Services Overview document 6. Tier 2 is defi

43、ned in separate documents in the TIA-102 Location Services document suite. This document specifies Tier 1 Location Services. Tier 1 supports a simple SU-to-SU interface without providing IP addressing, fixed host routing, or more advanced configuration of triggering and reporting. This approach is a

44、ppropriate for real-time field incident applications where the Location Service Host is resident on a portable device. It does not provide a mechanism to provide location information to a host device on a fixed network. The Tier 1 approach utilizes a dedicated Service Access Point on the CAI Data Be

45、arer Service described in 2 to transport location information formatted as described in NMEA 0183 3, a commonly used location protocol. 1.1 Scope This document fully specifies the Tier 1 Location Service. 1.2 References The appearance of “Project 25” in references below indicates the TIA document ha

46、s been adopted by the APCO/NASTD/FED Project 25 Steering Committee as part of its Project 25 standard, i.e. “the Standard.” 1.2.1 Normative References The following documents contain provisions that, through reference in this text, constitute provisions of this document. At the time of publication,

47、the editions indicated were valid. All documents are subject to revision, and parties to agreements based on this document are encouraged to investigate the possibility of applying the most recent editions of the documents indicated below. ANSI and TIA maintain registers of currently valid national

48、standards published by them. 1 TIA-102.BAAC-C, Project 25 Common Air Interface Reserved Values, ANSI/TIA, April 2011 2 TIA-102.BAEA-B, Project 25 Data Overview and Specification, ANSI/TIA, June 2012 3 NEMA 0183, Version 3.01, NMEA (http:/www.nmea.org/pub/0183), January 2002 1.2.2 Informative Referen

49、ces 4 TIA Style Manual, TIA, January 1992 5 TSB-102-B, Project 25 TIA-102 Documentation Suite Overview, TIA, June 2012 TIA-102.BAJB-A 2 6 TSB-102.BAJA-A, Project 25 Location Services Overview, TIA, February 2010 1.3 Acronyms and Abbreviations ACK Acknowledgement ANSI American National Standards Institute APCO Association of Public-Safety Communications Officials CAI Common Air Interface EIA Electronics Industry Association FED Various Agencies of the Federal Government FNE Fixed Network Equipment FSRFixed Station Repeater GPS Global Posi