TIA-102 BBAC-2010 Project 25 Phase 2 Two- Slot TDMA Media Access Control Layer Description《项目25 第2阶段 双槽TDMA介质访问控制层描述》.pdf

1、 TIA-102.BBAC December 2010 Project 25 Phase 2 Two- Slot TDMA Media Access Control Layer Description NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability

2、 and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling produ

3、cts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standa

4、rds Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicab

5、le regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0380, formulated under the cognizance of the TIA, TR-8 Mo

6、bile and Personal Private Radio Standards. TR-8.12 Subcommittee onTwo-Slot TDMA). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCI

7、ATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS USA and Canada (1-800-525-7052 ) International (303-790-0600) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of the

8、se documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request

9、 permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Docu

10、ment may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no s

11、earch or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligatio

12、n to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or

13、non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other S

14、SO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA di

15、sclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending

16、 patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the conte

17、nts of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCUR

18、ACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WAR

19、RANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIREC

20、T OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRA

21、CT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITAT

22、IONS. TIA-102.BBAC iiiTABLE OF CONTENTS 1 INTRODUCTION . 1 1.1 OVERVIEW OF THE STANDARD 1 1.2 DOCUMENT ORGANIZATION 1 2 SCOPE 3 2.1 SCOPE OF THE STANDARD . 3 2.2 REFERENCES . 4 2.2.1 Normative References 4 2.2.2 Informative References 5 2.3 GLOSSARY 5 2.3.1 Acronyms . 5 2.3.2 Definitions . 6 2.3.3 C

23、onventions . 8 3 TDMA TRUNKED VOICE CHANNEL DESCRIPTION AND STRUCTURE 10 3.1 INTRODUCTION . 10 3.2 MAC LAYER CHANNEL STRUCTURE 10 3.2.1 Generic Two-Slot Superframe Structure - Time Slot Numbering and TDMA Channel Numbering . 10 3.2.2 Ultraframe . 11 3.3 LOGICAL CHANNEL DESCRIPTIONS ON A VOICE CHANNE

24、L . 12 3.3.1 VTCH (Voice Transport CHannel) 14 3.3.2 SACCH (Slow Associated Control CHannel) 14 3.3.3 FACCH (Fast Associated Control CHannel) 15 3.3.4 ISCH (Inter-slot Signaling CHannel) 15 3.4 TIMING ALIGNMENT BETWEEN CCH AND VCH . 17 3.4.1 TDMA Channel Alignment 17 3.4.2 Synchronization Method Whe

25、n the CCH is a FDMA CCH . 17 4 BURST DESCRIPTION . 20 4.1 GENERAL DESCRIPTION 20 4.2 BURSTS CONTAINING VOICE FRAMES . 22 4.3 BURSTS CONTAINING SIGNALING (DATA, CONTROL) . 26 5 BURST FIELD DEFINITIONS 29 5.1 SYNCHRONIZATION SEQUENCES . 29 5.2 PILOT SEQUENCE 30 5.3 VOICE FIELDS . 31 5.4 DATA UNIT ID (

26、DUID) . 31 5.4.1 DUID Encoding . 32 5.4.2 Decoding Schemes . 33 5.5 INFORMATION IN ISCH . 33 5.6 ENCODED MAC INFORMATION AND ENCRYPTION SYNCHRONIZATION SIGNAL . 35 5.6.1 Encoded MAC Information (EMI) . 37 5.6.1.1 Inbound Encoded MAC Information (IEMI) 37 5.6.1.2 Outbound Encoded MAC Information with

27、 Sync (S-OEMI) 38 5.6.1.3 Outbound Encoded MAC Information (I-OEMI) . 38 5.6.2 Encryption Synchronization Signal (ESS) . 39 5.6.2.1 ESS Decoding . 39 5.7 RAMP 40 6 BEARER SERVICE DESCRIPTION . 41 TIA-102.BBAC iv 6.1 VOICE BURST SEQUENCING (BASIC VOICE SERVICE) . 41 6.2 DUID MANAGEMENT . 42 7 MAC PRO

28、TOCOL DESCRIPTION . 43 7.1 OVERVIEW OF PROTOCOL . 43 7.2 GENERIC MAC PROCEDURES . 43 7.2.1 Signaling on Unassigned Channel 43 7.2.2 Signaling on an Assigned VCH . 44 7.2.2.1 Use of the Inbound SACCH on an Assigned Channel 45 7.2.2.2 Use of the Outbound SACCH on an Assigned Channel .45 7.2.3 Alternat

29、e Activity Signaling 46 7.2.4 Synchronization Procedures . 47 7.2.4.1 Symbol Synchronization .47 7.2.4.2 Synchronization to the VCH .47 7.2.4.3 FDMA CCH and TDMA VCH Synchronization Procedures.50 7.2.5 Scrambling 51 7.2.6 Power Control 56 7.2.6.1 Introduction 56 7.2.6.2 Open Loop Power Control on In

30、bound VCH 56 7.2.6.3 Closed Loop Power Control on Inbound VCH .57 7.3 VOICE CHANNEL PROCEDURES 58 7.3.1 Assigned VCH Initial Access Procedures (Call Setup) . 58 7.3.2 Assigned VCH Maintenance Procedures (Traffic Mode) . 60 7.3.3 Assigned VCH Termination (Call Teardown) . 61 7.3.3.1 Transmission Trun

31、ked Termination .62 7.3.3.2 Message Trunked Termination .62 7.3.4 Assigned VCH Message Trunking Call Continuation Procedures (Hangtime continuation) 63 7.3.4.1 Call Continuation on CCH 63 7.3.4.2 Call Continuation on VCH64 7.3.5 Assigned VCH Preemption . 65 7.3.5.1 VCH Audio Preemption 66 7.3.5.2 VC

32、H Call Preemption .71 8 MAC PDUS 77 8.1 MAC PDUS GENERAL DESCRIPTION . 77 8.1.1 Outbound MAC PDU 77 8.1.2 Inbound MAC PDU 79 8.2 EXHAUSTIVE DESCRIPTION OF MAC PDUS . 80 8.2.1 MAC_PTT PDU 80 8.2.2 MAC_END_PTT PDU 83 8.2.3 MAC_IDLE, MAC_ACTIVE, and MAC_HANGTIME PDU Formats 86 8.3 MAC MESSAGE DETAILS .

33、 89 8.3.1.1 Null Information Message 91 8.3.1.2 Group Voice Channel User Message .91 8.3.1.3 Unit to Unit Voice Channel User Message 92 8.3.1.4 Telephone Interconnect Voice Channel User Message 93 8.3.1.5 Unit to Unit Voice Request .94 8.3.1.6 Group Voice Channel Grant Update Multiple .94 8.3.1.7 Gr

34、oup Voice Channel Grant .96 8.3.1.8 Group Voice Channel Grant Update 97 8.3.1.9 Group Voice Channel Grant Update Explicit .97 8.3.1.10 Unit to Unit Voice Channel Grant 98 8.3.1.11 Unit to Unit Answer Request 99 8.3.1.12 Radio Unit Monitor Enhanced Command 100 8.3.1.13 Telephone Interconnect Answer R

35、equest . 101 8.3.1.14 Unit to Unit Voice Channel Grant Update 101 8.3.1.15 ACK Response . 103 8.3.1.16 SNDCP Data Channel Grant 104 8.3.1.17 SNDCP Data Page Request . 104 TIA-102.BBAC v 8.3.1.18 SNDCP Data Channel Announcement Explicit. 105 8.3.1.19 Adjacent Status Broadcast 106 8.3.1.20 Call Alert

36、. 107 8.3.1.21 Extended Function Command 108 8.3.1.22 Group Affiliation Query . 108 8.3.1.23 Identifier Update . 109 8.3.1.24 Time and Date Announcement 110 8.3.1.25 Network Status Broadcast 111 8.3.1.26 Group Voice Service Request 112 8.3.1.27 RFSS Status Broadcast . 112 8.3.1.28 Secondary Control

37、Channel Broadcast 113 8.3.1.29 Status Query 114 8.3.1.30 Queued Response 115 8.3.1.31 Deny Response 115 8.3.1.32 System Service Broadcast 116 8.3.1.33 Unit Registration Command 116 8.3.1.34 Radio Unit Monitor Command 117 8.3.1.35 Identifier Update for VHF/UHF Bands . 117 8.3.1.36 Identifier Update f

38、or TDMA 118 8.3.1.37 Manufacturer Message . 118 8.3.1.38 Individual Paging Message 119 8.3.1.39 Group Paging Message . 121 8.3.1.40 Power Control Signal Quality 122 8.3.1.41 MAC_Release . 122 8.4 MAC FIELDS DEFINITION . 123 8.4.1 Opcode. 123 8.4.2 Offset . 123 8.4.3 RF Level 125 8.4.4 BER 126 8.4.5

39、CRC . 126 8.4.6 Unforced/Forced (U/F) Field 127 8.4.7 Call Preemption/Audio Preemption (C/A) Field . 128 8.4.8 Color Code 128 8.4.9 Other Fields from Phase 1. 129 ANNEX A GALOIS FIELD FOR REED SOLOMON CODES (INFORMATIVE) . 131 A.1 GF(64) ARITHMETIC . 131 A.2 EXPONENTIAL AND LOGARITHM TABLES 131 A.3

40、MOTHER CODE GENERATOR MATRIX FOR (63,35,29) RS CODE . 132 ANNEX B OSP MCO OPCODE LIST (INFORMATIVE) . 136 ANNEX C EXAMPLES OF PTT AND CALL TERMINATION ON VCH0 AND VCH1 (INFORMATIVE) . 138 ANNEX D EXAMPLES OF CALL SETUP ON VCH0 (INFORMATIVE) 142 ANNEX E BURST BIT LOCATIONS (NORMATIVE) . 151 TIA-102.B

41、BAC vi LIST OF FIGURES FIGURE 1-1 REPRESENTATIVE PROTOCOL MODEL FOR P25 TWO-SLOT TDMA TRUNKED VOICE SERVICE 2 FIGURE 3-1 SUPERFRAME STRUCTURE FOR TWO-SLOT TDMA. 11 FIGURE 3-2 ULTRAFRAME STRUCTURE . 11 FIGURE 3-3 VCH 0 STRUCTURE 13 FIGURE 3-4 VCH 1 STRUCTURE 13 FIGURE 3-5 SYNC_BCST MESSAGE RELATIONSH

42、IP TO FDMA CCH . 18 FIGURE 3-6 TDMA SUPERFRAME RELATIONSHIP TO FDMA CCH MICRO-SLOT 19 FIGURE 3-7 ALIGNMENT OF FDMA AND TDMA SYMBOLS AT SYNCD MINUTE BOUNDARY 19 FIGURE 4-1 INBOUND AND OUTBOUND BURST STRUCTURE 21 FIGURE 4-2 INBOUND 4 VOICE BURST STRUCTURE WITH ESS 22 FIGURE 4-3 INBOUND 2 VOICE/SHORT S

43、IGNALING BURST STRUCTURE WITH ESS 23 FIGURE 4-4 OUTBOUND 4 VOICE BURST STRUCTURE WITH ESS . 24 FIGURE 4-5 OUTBOUND 2 VOICE BURST STRUCTURE WITH ESS . 25 FIGURE 4-6 INBOUND SIGNALING BURST STRUCTURE WITH SYNCHRONIZATION 26 FIGURE 4-7 OUTBOUND SIGNALING BURST STRUCTURE WITH SYNCHRONIZATION 27 FIGURE 4

44、-8 OUTBOUND SIGNALING BURST STRUCTURE WITHOUT SYNCHRONIZATION 28 FIGURE 5-1 DUID CODEWORD CONSTRUCTION FOR (8,4,4) BINARY CODE 31 FIGURE 5-2 ISCH CONTAINING INFORMATION 33 FIGURE 5-3 ISCH OF PAYLOAD VCH TIMESLOT . 34 FIGURE 5-4 ISCH COSET CODE WORD CONSTRUCTION 35 FIGURE 5-5 DERIVED CODES FROM MOTHE

45、R CODE 36 FIGURE 5-6 IEMI DISTRIBUTION . 37 FIGURE 5-7 S-OEMI DISTRIBUTION 37 FIGURE 5-8 I-OEMI DISTRIBUTION . 38 FIGURE 5-9 ESS DISTRIBUTION . 39 FIGURE 6-1 VOICE BURSTS REPETITIVE PATTERN . 41 FIGURE 6-2 EXAMPLE VOICE BURST SEQUENCING 41 FIGURE 7-1 INTERNAL LFSR GENERATOR OF SCRAMBLE SEQUENCE . 51

46、 FIGURE 7-2 EXTERNAL LFSR GENERATOR OF SCRAMBLE SEQUENCE 51 FIGURE 7-3 MATRIX TO CONVERT TO INTERNAL LFSR 53 FIGURE 7-4 MATRIX TO ADVANCE EXTERNAL LFSR 243 SHIFT CYCLES . 54 FIGURE 7-5 SCRAMBLING SEQUENCE OFFSETS . 56 FIGURE 8-1 STRUCTURE OF MAC PDU . 77 FIGURE 8-2 OUTBOUND MAC PDU FORMATS 78 FIGURE

47、 8-3 INBOUND MAC PDU IN IEMI (19.5 OCTETS) . 79 FIGURE 8-4 INBOUND MAC_PTT PDU (19.5 OCTETS) . 80 FIGURE 8-5 OUTBOUND MAC_PTT PDU (19.5 OCTETS) 81 FIGURE 8-6 OUTBOUND MAC_PTT PDU (22.5 OCTETS) 82 FIGURE 8-7 INBOUND MAC_END_PTT PDU (19.5 OCTETS) . 83 FIGURE 8-8 OUTBOUND MAC_END_PTT PDU (19.5 OCTETS)

48、84 FIGURE 8-9 OUTBOUND MAC_END_PTT PDU (22.5 OCTETS) 85 FIGURE 8-10 GENERIC OUTBOUND MAC INFORMATION FORMATS 86 FIGURE 8-11 SUBSCRIBER UNIT IDENTIFICATION FORMAT . 88 FIGURE 8-12 NULL INFORMATION MESSAGE. 91 FIGURE 8-13 GROUP VOICE CHANNEL USER MESSAGE ABBREVIATED FORMAT . 91 FIGURE 8-14 GROUP VOICE

49、 CHANNEL USER MESSAGE EXTENDED FORMAT . 92 FIGURE 8-15 UNIT TO UNIT VOICE CHANNEL USER MESSAGE ABBREVIATED FORMAT . 92 FIGURE 8-16 UNIT TO UNIT VOICE CHANNEL USER MESSAGE EXTENDED FORMAT 93 FIGURE 8-17 TELEPHONE INTERCONNECT VOICE CHANNEL USER MESSAGE 93 FIGURE 8-18 UNIT TO UNIT VOICE REQUEST ABBREVIATED FORMAT . 94 FIGURE 8-19 UNIT TO UNIT VOICE REQUEST EXTENDED FORMAT . 94 FIGURE 8-20 GROUP VOICE CHANNEL GRANT UPDATE MULTIPLE . 95 FIGURE 8-21 GROUP VOICE CHANNEL GRANT UPDATE MULTIPLE - EXPLICIT . 95 FIGURE 8-22 GROUP VOICE CHANNEL GRANT - ABBREVIATED FORMAT 96 FIGURE