TIA-102 CAEA-A-2016 Project 25 Conformance Profile Level One- Basic Conventional Operation.pdf

1、 TIA-102.CAEA-A (Revision of TIA-102.CAEA) June 2016Project 25 Conformance Profile Level One- Basic Conventional Operation NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitat

2、ing interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufact

3、uring or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the Am

4、erican National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with i

5、ts use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purpose

6、s and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-102.CAEA-A, formulated under the cognizance of the TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee on Compliance Assessment). Published by

7、TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The us

8、e or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applicat

9、ions are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a

10、party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or prov

11、ided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a st

12、andard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for

13、 IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as t

14、o claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or

15、otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PA

16、RTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABL

17、E STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CO

18、NTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT

19、 LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-102.CAEA-A i Table of Contents 1 Introduction 1 2

20、Scope 1 2.1 Scope 1 2.2 Nomenclature 1 2.3 Abbreviations 2 2.4 Revision History 2 2.5 References 2 2.5.1 Normative References . 2 2.5.2 Informative References 3 3 Overview . 3 3.1 Conventional Conformance Test Scope . 3 3.2 Conventional Conformance Test Roles 3 3.3 Conventional Conformance Test Pass

21、/Fail Criteria 4 3.4 Conventional Conformance Test Environment 5 3.4.1 Single-segment Testing . 5 3.4.2 Multi-segment Testing 6 3.4.3 Test Environment Requirements . 8 3.5 Audio sources . 8 4 Status Symbols 9 5 PCP 1.1.1 Group Call via Repeater Operation 9 5.1 Non-Emergency Successful Group Call 9 5

22、.1.1 Description . 9 5.1.2 Pre-Conditions . 9 5.1.3 Post-Condition . 10 5.1.4 Procedure 10 5.1.5 Signaling Parameters. 12 5.2 Alternative Procedure Emergency Operation . 13 5.2.1 Description . 13 5.2.2 Pre-Conditions . 13 5.2.3 Post-Condition . 13 5.2.4 Procedure 14 5.2.5 Signaling Parameters. 15 TI

23、A-102.CAEA ii 5.3 Alternative Procedure Co-Channel Interference Suppression By RFSS 16 5.3.1 Description . 16 5.3.2 Pre-Conditions . 16 5.3.3 Post-Condition . 17 5.3.4 Procedure 17 5.3.5 Signaling Parameters. 18 5.4 Alternative Procedure No Co-Channel Interference Suppression by RFSS Repeated NAC 19

24、 5.4.1 Description . 19 5.4.2 Pre-Conditions . 20 5.4.3 Post-Condition . 20 5.4.4 Procedure 20 5.4.5 Signaling Parameters. 20 5.5 Alternative Procedure No Co-Channel Interference Suppression by RFSS Fixed TX NAC 22 5.5.1 Description . 22 5.5.2 Pre-Conditions . 22 5.5.3 Post-Condition . 23 5.5.4 Proc

25、edure 23 5.5.5 Signaling Parameters. 23 5.6 Alternative Procedure Rx Squelch by Target SUs . 23 5.6.1 Description . 23 5.6.2 Pre-Conditions . 24 5.6.3 Post-Condition . 25 5.6.4 Procedure 25 5.6.5 Signaling Parameters. 26 5.7 Alternative Procedure All-Call 26 5.7.1 Description . 26 5.7.2 Pre-Conditio

26、ns . 27 5.7.3 Post-Condition . 28 5.7.4 Procedure 28 5.7.5 Signaling Parameters. 29 6 PCP 1.1.2 Individual Call via Repeater Operation 31 6.1 Successful Individual Call (Unit-to-Unit call) 31 6.1.1 Description . 31 TIA-102.CAEA-A iii 6.1.2 Pre-Conditions . 31 6.1.3 Post-Condition . 32 6.1.4 Procedur

27、e 32 6.1.5 Signaling Parameters. 33 6.2 Alternative Procedure Co-Channel Interference Suppression By RFSS 35 6.2.1 Description . 35 6.2.2 Pre-Conditions . 35 6.2.3 Post-Condition . 36 6.2.4 Procedure 36 6.2.5 Signaling Parameters. 37 6.3 Alternative Procedure No Co-Channel Interference Suppression b

28、y RFSS . 38 6.3.1 Description . 38 6.3.2 Pre-Conditions . 38 6.3.3 Post-Condition . 38 6.3.4 Procedure 39 6.3.5 Signaling Parameters. 39 6.4 Alternative Procedure Rx Squelch by Target SU . 40 6.4.1 Description . 40 6.4.2 Pre-Conditions . 41 6.4.3 Post-Condition . 42 6.4.4 Procedure 42 6.4.5 Signalin

29、g Parameters. 43 7 PCP 1.1.3 Group Call Direct Operation . 43 7.1 Non Emergency Successful Group Call 43 7.1.1 Description . 43 7.1.2 Pre-Conditions . 43 7.1.3 Post-Condition . 45 7.1.4 Procedure 45 7.1.5 Signaling Parameters. 46 7.2 Alternative Procedure Emergency Operation . 47 7.2.1 Description .

30、 47 7.2.2 Pre-Conditions . 47 7.2.3 Post-Condition . 48 7.2.4 Procedure 48 TIA-102.CAEA iv 7.2.5 Signaling Parameters. 48 7.3 Alternative Procedure Rx Squelch by Target SUs . 49 7.3.1 Description . 49 7.3.2 Pre-Conditions . 50 7.3.3 Post-Condition . 51 7.3.4 Procedure 51 7.3.5 Signaling Parameters.

31、52 7.4 Alternative Procedure All-Call 52 7.4.1 Description . 52 7.4.2 Pre-Conditions . 52 7.4.3 Post-Condition . 55 7.4.4 Procedure 55 7.4.5 Signaling Parameters. 55 8 PCP 1.1.4 Individual Call Direct Operation 56 8.1 Non-Emergency Successful Individual Call 56 8.1.1 Description . 56 8.1.2 Pre-Condi

32、tions . 57 8.1.3 Post-Condition . 57 8.1.4 Procedure 57 8.1.5 Signaling Parameters. 59 8.2 Alternative Procedure Rx Squelch by Target SU . 60 8.2.1 Description . 60 8.2.2 Pre-Conditions . 60 8.2.3 Post-Condition . 62 8.2.4 Procedure 62 8.2.5 Signaling Parameters. 63 TIA-102.CAEA-A v List of Figures

33、Figure 3-1: Test Environment for Single-segment Direct Mode Operation 5 Figure 3-2: Direct Mode Test Environment Using Conformant Equipment 6 Figure 3-3: Test Environment for Conformance Testing of a Repeating Fixed Station with Multiple SUs. . 7 Figure 3-4: Repeating Fixed Station Mode Test Environ

34、ment Using Conformant Equipment 8 Figure 5-1: Talkgroup Voice transmission via Repeater not Suppressed . 11 Figure 5-2: Talkgroup Voice transmission via Repeater Suppressed at Repeater . 18 Figure 6-1: Individual Voice transmission via Repeater not Suppressed 33 Figure 7-1: Direct Talkgroup Voice tr

35、ansmission . 46 Figure 8-1: Direct Individual Voice transmission . 58 Foreword (This foreword is not part of this standard.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December

36、1993. That MOU provides that the APCO/NASTD/FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the Co

37、mpliance Assessment Process and Procedures Task Group (CAPPTG) and the TIA Industry members. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes a Conforma

38、nce Profile for basic conventional operation utilizing the Common Air Interface meeting the Project 25 requirements. These definitions are necessary to insure conformance of radio units and systems. As other documents describing the conventional and trunking protocols are developed, this document wi

39、ll be subject to change. All reasonable efforts have been made to ensure accuracy, but it should be understood that conformance test remain to be developed and proven. TIA-102.CAEA-A 1 1 INTRODUCTION This document defines a P25 Conformance Profile (PCP) for basic conventional operation, which is fur

40、ther subdivided into functional groupings and items. Each PCP item devolves to a set of procedures (detailed later in this document) that define reference-signaling sequences for the identified scenarios. A manufacturer may choose to conform with all or part of this Conformance Profile. It is antici

41、pated that, for the basic Conformance Profile, a manufacturer would wish to cover most of the PCP items; while more advanced Conformance Profiles may be addressed in a less comprehensive manner. There is, of course, no obligation on a manufacturer to adopt this approach however the PCP framework all

42、ows a manufacturer to make unambiguous statements about which of a products functions are conformant. 2 SCOPE 2.1 Scope This document is intended to clarify key aspects of the operation of Project 25 subscriber, base, and repeater station equipment in the interests of conformance. It includes a set

43、of PCP items or procedures for basic conventional operation as follows: PCP 1.1 Voice Calls PCP 1.1.1 Group Call via Repeater Operation PCP 1.1.2 Individual Call via Repeater Operation PCP 1.1.3 Group Call Direct Operation PCP 1.1.4 Individual Call Direct Operation It is consistent with other pertin

44、ent APCO Project 25 Conformance Profiles, namely: Project 25 Conformance Profile Level 2 (Advanced Conventional Operation) Project 25 Conformance Profile Level 3 (Basic Trunking Operation) Project 25 Conformance Profile Level 4 (Advanced Trunking Operation) Project 25 Conformance Profile Level 5 (Ph

45、ase II Trunking Operation) This document is primarily aimed at manufacturers and conformance test facilities to serve as a standard reference of conformant air interface signaling, as a means of assisting manufacturers in the development of conformant Project 25 equipment. It also defines a framewor

46、k against which manufacturers may describe the conformant behaviour of their Project 25 products. It is not designed as a functional interoperability test suite for end users, for which readers are referred to 7. This document assumes an audience familiar with terms and definitions contained in the

47、APCO P25 standards. 2.2 Nomenclature In this document % indicates a binary value, and $ indicates a hex value. TIA-102.CAEA-A 2 2.3 Abbreviations ANSI: American National Standards Institute APCO: Association of Public-Safety Communications Officials EIA: Electronic Industry Alliance ESW: Encryption

48、Sync Word FS: Frame Sync LCW: Link Control Word MBT, MBTP: Multiple Block Trunking Packet MFID: Manufacturers Identity PCP: P25 Conformance Profile PTT: Press To Talk RFSS: Radio Frequency Sub-System Rx: Receive SU: Subscriber Unit TGID: Talk Group ID TIA: Telecommunications Industry Association Tx:

49、 Transmit UID: Unit ID UUT: Unit Under Test 2.4 Revision History First Edition April, 2009 Approved for Publication R1 December, 2009 Updated per TR8-25 decisions in Charlotte, NC R2 February, 2016 Updated per TR8-25 decisions in Austin, TX R3 June, 2016 Updated per editorial comments on ballot 2.5 References The following documents contain provisions that, through reference in this text, constitute provisions of this document. At the time of publication, the editions indicated were valid. All standa