TIA-1030-B-2006 Band Class Specification for cdma2000 Spread Spectrum Systems《CDMA2000扩频系统的频带级规范》.pdf

1、 TIA STANDARD Band Class Specification for cdma2000 Spread Spectrum Systems TIA-1030-B (Revision to TIA-1030-A) December 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommunications Indus

2、try Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchas

3、ers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA

4、 from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordan

5、ce with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems ass

6、ociated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0144-RV2, formulated under the c

7、ognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of

8、contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed

9、and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussi

10、ons of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manua

11、l have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specifica

12、tion, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance

13、relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the oth

14、er SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or an

15、y claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONI

16、NFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EF

17、FECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

18、TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGAT

19、ION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTE

20、NTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1030-B v1.0 CONTENTS i FOREWORD xliii 1 NOTES .xlv 2 REFERENCES.

21、xlix 3 1 GENERAL1-1 4 1.1 Terms1-1 5 1.2 Numeric Information .1-4 6 1.2.1 Mobile Station Stored Parameters1-4 7 1.3 Tolerances.1-4 8 1.4 System Selection Code.1-5 9 1.5 List of Band Classes 1-7 10 2 REQUIREMENTS FOR THE OPERATION OF THE “PHYSICAL LAYER STANDARD FOR 11 CDMA2000 SPREAD SPECTRUM SYSTEM

22、S” .2-1 12 2.1 Channel Spacing and Designation .2-1 13 2.1.1 Band Class 0 (800 MHz Band) .2-1 14 2.1.2 Band Class 1 (1900 MHz Band) .2-6 15 2.1.3 Band Class 2 (TACS Band).2-10 16 2.1.4 Band Class 3 (JTACS Band).2-15 17 2.1.5 Band Class 4 (Korean PCS Band).2-17 18 2.1.6 Band Class 5 (450 MHz Band) .2

23、20 19 2.1.7 Band Class 6 (2 GHz Band)2-26 20 2.1.8 Band Class 7 (700 MHz Band) .2-28 21 2.1.9 Band Class 8 (1800 MHz Band) .2-31 22 2.1.10 Band Class 9 (900 MHz Band) .2-32 23 2.1.11 Band Class 10 (Secondary 800 MHz Band) 2-34 24 2.1.12 Band Class 11 (400 MHz European PAMR Band).2-38 25 2.1.13 Band

24、 Class 12 (800 MHz PAMR Band).2-44 26 2.1.14 Band Class 13 (2.5 GHz IMT-2000 Extension Band) 2-46 27 2.1.15 Band Class 14 (US PCS 1.9GHz Band).2-53 28 2.1.16 Band Class 15 (AWS Band)2-58 29 2.1.17 Band Class 16 (US 2.5GHz Band) 2-62 30 2.2 Frequency Tolerance .2-66 31 2.3 Power Output Characteristic

25、s: Controlled Output Power .2-66 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1030-B v1.0 CONTENTS ii 2.3.1 Open Loop Output Power for Reverse Link Channels.2-67 1 3 R

26、EQUIREMENTS FOR THE OPERATION OF THE “CDMA2000 HIGH RATE PACKET DATA 2 AIR INTERFACE” 3-1 3 3.1 Channel Spacing and Designation.3-1 4 3.1.1 Band Class 0 (800-MHz Band).3-1 5 3.1.2 Band Class 1 (1900-MHz Band).3-4 6 3.1.3 Band Class 2 (TACS Band) 3-5 7 3.1.4 Band Class 3 (JTACS Band) 3-7 8 3.1.5 Band

27、 Class 4 (Korean PCS Band) 3-9 9 3.1.6 Band Class 5 (450-MHz Band).3-10 10 3.1.7 Band Class 6 (2-GHz Band).3-14 11 3.1.8 Band Class 7 (700-MHz Band).3-15 12 3.1.9 Band Class 8 (1800-MHz Band).3-16 13 3.1.10 Band Class 9 (900-MHz Band).3-17 14 3.1.11 Band Class 10 (Secondary 800 MHz Band)3-18 15 3.1.

28、12 Band Class 11 (400 MHz European PAMR Band).3-19 16 3.1.13 Band Class 12 (800 MHz PAMR Band).3-23 17 3.1.14 Band Class 13 (2.5 GHz IMT-2000 Extension Band)3-24 18 3.1.15 Band Class 14 (US PCS 1.9GHz Band) 3-27 19 3.1.16 Band Class 15 (AWS Band) .3-28 20 3.1.17 Band Class 16 (US 2.5GHz Band)3-30 21

29、 3.1.18 Band Class 17 (US 2.5GHz Forward Link Only Band)3-32 22 3.2 Frequency Tolerance .3-33 23 3.3 Power Output Characteristics: Controlled Output Power.3-33 24 3.3.1 Estimated Open Loop Output Power for Reverse Link Channels 3-33 25 Copyright Telecommunications Industry Association Provided by IH

30、S under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1030-B v1.0 TABLES iii Table 1.4-1: System Selection Codes 1-5 1 Table 1.5-1: Band Class List.1-8 2 Table 2.1.1-1. Band Class 0 System Frequency Correspondence2-2 3 Table 2.1.1-2. CDMA Chan

31、nel Number to CDMA Frequency Assignment 4 Correspondence for Band Class 0.2-2 5 Table 2.1.1-3. CDMA Channel Numbers and Corresponding Frequencies for Band 6 Class 0 and Spreading Rate 1.2-3 7 Table 2.1.1-4. CDMA Channel Numbers and Corresponding Frequencies for Band 8 Class 0 and Spreading Rate 3.2-

32、4 9 Table 2.1.1-5. CDMA Preferred Set of Frequency Assignments for Band Class 0.2-5 10 Table 2.1.1-6. Sync Channel Preferred Set of Frequency Assignments for Spreading 11 Rate 3 for Band Class 02-5 12 Table 2.1.2-1. Band Class 1 Block Frequency Correspondence 2-7 13 Table 2.1.2-2. CDMA Channel Numbe

33、r to CDMA Frequency Assignment 14 Correspondence for Band Class 1.2-7 15 Table 2.1.2-3. CDMA Channel Numbers and Corresponding Frequencies for Band 16 Class 1 and Spreading Rate 1.2-8 17 Table 2.1.2-4. CDMA Channel Numbers and Corresponding Frequencies for Band 18 Class 1 and Spreading Rate 3.2-9 19

34、 Table 2.1.2-5. CDMA Preferred Set of Frequency Assignments for Band Class 1.2-10 20 Table 2.1.2-6. Sync Channel Preferred Set of Frequency Assignments for Spreading 21 Rate 3 for Band Class 12-10 22 Table 2.1.3-1. Band Class 2 Block Frequency Correspondence 2-11 23 Table 2.1.3-2. Band Class 2 Band

35、Subclasses2-12 24 Table 2.1.3-3. CDMA Channel Number to CDMA Frequency Assignment 25 Correspondence for Band Class 2.2-12 26 Table 2.1.3-4. CDMA Channel Numbers and Corresponding Frequencies for Band 27 Class 2 and Spreading Rate 1.2-13 28 Table 2.1.3-5. CDMA Channel Numbers and Corresponding Freque

36、ncies for Band 29 Class 2 and Spreading Rate 3.2-14 30 Table 2.1.3-6. CDMA Preferred Set of Frequency Assignments for Band Class 2.2-14 31 Table 2.1.4-1. Band Class 3 System Frequency Correspondence2-15 32 Table 2.1.4-2. CDMA Channel Number to CDMA Frequency Assignment 33 Correspondence for Band Cla

37、ss 3.2-16 34 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1030-B v1.0 TABLES iv Table 2.1.4-3. CDMA Channel Numbers and Corresponding Frequencies for Band 1 Class 3 and S

38、preading Rate 1 2-16 2 Table 2.1.4-4. CDMA Preferred Set of Frequency Assignments for Band Class 3 2-17 3 Table 2.1.5-1. Band Class 4 Block Frequency Correspondence 2-18 4 Table 2.1.5-2. CDMA Channel Number to CDMA Frequency Assignment 5 Correspondence for Band Class 4. 2-18 6 Table 2.1.5-3. CDMA Ch

39、annel Numbers and Corresponding Frequencies for Band 7 Class 4 and Spreading Rate 1 2-18 8 Table 2.1.5-4. CDMA Channel Numbers and Corresponding Frequencies for Band 9 Class 4 and Spreading Rate 3 2-19 10 Table 2.1.5-5. CDMA Preferred Set of Frequency Assignments for Band Class 4 2-19 11 Table 2.1.5

40、6. Sync Channel Preferred Set of Frequency Assignments for Spreading 12 Rate 3 for Band Class 4 2-19 13 Table 2.1.6-1. Band Class 5 Block Frequency Correspondence and Band Subclasses 2-21 14 Table 2.1.6-2. CDMA Channel Number to CDMA Frequency Assignment 15 Correspondence for Band Class 5. 2-22 16

41、Table 2.1.6-3. CDMA Channel Numbers and Corresponding Frequencies for Band 17 Class 5 and Spreading Rate 1 2-23 18 Table 2.1.6-4. CDMA Channel Numbers and Corresponding Frequencies for Band 19 Class 5 and Spreading Rate 3 2-24 20 Table 2.1.6-5. CDMA Preferred Set of Frequency Assignments for Band Cl

42、ass 5 2-25 21 Table 2.1.6-6. Sync Channel Preferred Set of Frequency Assignments for Spreading 22 Rate 3 for Band Class 5 2-26 23 Table 2.1.7-1. CDMA Channel Number to CDMA Frequency Assignment 24 Correspondence for Band Class 6. 2-27 25 Table 2.1.7-2. CDMA Channel Numbers and Corresponding Frequenc

43、ies for Band 26 Class 6 and Spreading Rate 1 2-27 27 Table 2.1.7-3. CDMA Channel Numbers and Corresponding Frequencies for Band 28 Class 6 and Spreading Rate 3 2-27 29 Table 2.1.7-4. CDMA Preferred Set of Frequency Assignments for Band Class 6 2-28 30 Table 2.1.8-1. Band Class 7 Block Frequency Corr

44、espondence 2-29 31 Table 2.1.8-2. CDMA Channel Number to CDMA Frequency Assignment 32 Correspondence for Band Class 7. 2-29 33 Table 2.1.8-3. CDMA Channel Numbers and Corresponding Frequencies for Band 34 Class 7 and Spreading Rate 1 2-29 35 Copyright Telecommunications Industry Association Provided

45、 by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1030-B v1.0 TABLES v Table 2.1.8-4. CDMA Channel Numbers and Corresponding Frequencies for Band 1 Class 7 and Spreading Rate 3.2-30 2 Table 2.1.8-5. CDMA Preferred Set of Frequency As

46、signments for Band Class 7.2-30 3 Table 2.1.8-6. Sync Channel Preferred Set of Frequency Assignments for Spreading 4 Rate 3 for Band Class 72-30 5 Table 2.1.9-1. CDMA Channel Number to CDMA Frequency Assignment 6 Correspondence for Band Class 8.2-31 7 Table 2.1.9-2. CDMA Channel Numbers and Correspo

47、nding Frequencies for Band 8 Class 8 and Spreading Rate 1.2-32 9 Table 2.1.9-3. CDMA Channel Numbers and Corresponding Frequencies for Band 10 Class 8 and Spreading Rate 3.2-32 11 Table 2.1.9-4. CDMA Preferred Set of Frequency Assignments for Band Class 8.2-32 12 Table 2.1.10-1. CDMA Channel Number

48、to CDMA Frequency Assignment 13 Correspondence for Band Class 9.2-33 14 Table 2.1.10-2. CDMA Channel Numbers and Corresponding Frequencies for Band 15 Class 9 and Spreading Rate 1.2-33 16 Table 2.1.10-3. CDMA Channel Numbers and Corresponding Frequencies for Band 17 Class 9 and Spreading Rate 3.2-34

49、 18 Table 2.1.10-4. CDMA Preferred Set of Frequency Assignments for Band Class 9.2-34 19 Table 2.1.11-1. Band Class 10 System Frequency Correspondence 2-35 20 Table 2.1.11-2. CDMA Channel Number to CDMA Frequency Assignment 21 Correspondence for Band Class 10.2-35 22 Table 2.1.11-3. CDMA Channel Numbers and Corresponding Frequencies for Band 23 Class 10 and Spreading Rate 1.2-36 24 Table