TIA-1035-B-2014 Signaling Conformance Test Specification for cdma2000 Spread Spectrum Systems.pdf

1、 TIA-1035-B (Revision of TIA-1035-A) August 2014 Signaling Conformance Test Specification for cdma2000 Spread Spectrum Systems NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facil

2、itating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manu

3、facturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with th

4、e American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated wi

5、th its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information pur

6、poses and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-1035-B, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other b

7、ody in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyri

8、ghts, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no posit

9、ion with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether propose

10、d licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a do

11、cument published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the T

12、IA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures f

13、or American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or publis

14、hed pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED,

15、 ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND

16、 ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RE

17、NDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS O

18、F BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF

19、THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0043-B v1.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Publication 24 September 2004 Rev A v 0.7 Baseline text 10 December 2009 Rev A v 0.8 V&V text 25 June 2010 Rev A v 1.0

20、 Publication 17 September 2010 Rev B v 1.0 Add 1x Rev.F tests March 2014 Rev B v 1.0 Re-publication to clarify the Annex to be normative July 2014 3GPP2 C.S0043-B v1.0 i Introduction xv Scope xv Testing Objective xv Execution Strategy xv Base Station and Mobile Station Configurations xv Measurement

21、Tolerances xv Notes xvi Supplementary Terms and Definitions xvi Normative Document References xxxiv Informative Document References xxxv 1 Miscellaneous Air Interface Test 1-1 1.1 Pilot PN Offset 1-1 1.1.1 Mobile Station Test 1-1 1.1.2 Base Station Test 1-1 1.2 NoneMobile Station Processing of MIN_P

22、_REV 1-1 1.2.1 Mobile Station Test 1-1 1.2.2 Base Station Test 1-2 1.3 Enhanced Access Testing 1-2 1.3.1 Mobile Station Test 1-2 1.3.2 Base Station Test 1-6 1.4 SYNC Channel Support 1-6 1.4.1 Mobile Station Test 1-6 1.4.2 Base Station Test 1-15 1.5 Hashing F-CCCH, F-CCCH slot 1-15 1.5.1 Mobile Stati

23、on Test 1-15 1.5.2 Base Station Test 1-16 1.6 CDMA Channel Hashing on F-PCH 1-17 1.6.1 Mobile Station Test 1-17 1.6.2 Base Station Test 1-20 1.7 CDMA Channel Hashing on F-BCCH 1-21 1.7.1 Mobile Station Test 1-21 1.7.2 Base Station Test 1-25 1.8 F-CCCH SUPPORT 1-29 1.8.1 Mobile Station Test 1-29 1.8.

24、2 Base Station Test 1-29 1.9 Data Burst sent on the F-CCCH or F-PCH. 1-29 1.9.1 Mobile Station Test 1-29 1.9.2 Base Station Test 1-30 1.10 Quick Paging Channel CCI 1-31 1.10.1 Mobile Station Test 1-31 1.10.2 Base Station Test Case 1-33 1.11 Quick Paging Channel with Paging Indicator 1-33 1.11.1 Mobi

25、le Station Test 1-33 1.11.2 Base Station test 1-34 1.12 Status Request Message Processing 1-35 3GPP2 C.S0043-B v1.0 ii 1.12.1 Mobile Station Test 1-35 1.12.2 Base Station Test 1-36 1.13 M2M Capability Support 1-37 1.13.1 Mobile Station Test 1-37 1.13.2 Base Station Test 1-37 1.14 Data Burst sent on

26、the REACH. 1-38 1.14.1 Mobile Station Test 1-38 1.14.2 Base Station Test 1-38 1.15 Skip Overhead Read 1-39 1.15.1 Mobile Station Test 1-39 1.15.2 Base Station Test 1-39 1.16 Bundling R-SCH Request with Origination Message 1-40 1.16.1 Mobile Station Test 1-40 1.16.2 Base Station Test 1-42 2 Basic Cal

27、l processing 2-1 2.1 Forward Radio Link Failure 2-1 2.1.1 Mobile Station Test 2-1 2.1.2 Base Station Test 2-2 2.2 Test Service Options 2-2 2.2.1 Mobile Station Test 2-2 2.2.2 Base Station Test 2-3 2.3 Busy Tone 2-4 2.3.1 Mobile Station Test 2-4 2.3.2 Base Station Test 2-4 2.4 Mobile station Response

28、 to Reorder Order 2-5 2.4.1 Mobile Station Test 2-5 2.4.2 Base Station Test 2-5 2.5 Slot Cycle Index 2-6 2.5.1 Mobile Station Test 2-6 2.5.2 Base Station Test 2-7 2.6 MSID, MCC, and IMSI 2-7 2.6.1 Mobile Station Test 2-7 2.6.2 Base Station Test 2-10 2.7 TMSI Assignment and Expiration 2-10 2.7.1 Mobi

29、le Station Test 2-10 2.7.2 Base Station Test 2-12 2.8 DTMF 2-12 2.8.1 Mobile Station Test 2-12 2.8.2 Base Station Test 2-15 2.9 Initial Service Configuration and Negotiation 2-15 2.9.1 Mobile Station Test 2-15 2.9.2 Base Station Test 2-19 2.10 Base Station/Mobile Station Requested Service Negotiatio

30、n (Successful Scenarios) 2-21 2.10.1 Mobile Station Test 2-21 2.10.2 Base Station Test 2-24 3GPP2 C.S0043-B v1.0 iii 2.11 Reject Scenarios during Service Negotiation 2-25 2.11.1 Mobile Station Test 2-25 2.11.2 Base Station Test 2-26 2.12 SCR without NN-SCR and NN-SCR without SCR in General Handoff D

31、irection Message and Universal Handoff Direction Message 2-27 2.12.1 Mobile Station Test 2-27 2.12.2 Base Station Test 2-28 2.13 Service Negotiation Involving Partial SCR and/or Partial NN-SCR 2-28 2.13.1 Mobile Station Test 2-28 2.13.2 Base Station Test 2-30 2.14 Release Order on the Access Channel

32、 2-31 2.14.1 Mobile Station Test 2-31 2.14.2 Base Station Test 2-32 2.15 Service Configuration and Negotiation Using Stored Service Configuration 2-32 2.15.1 Mobile Station Test 2-32 2.15.2 Base Station Test 2-36 2.16 Intra-Band Channel Assignment 2-39 2.16.1 Mobile Station Test 2-39 2.16.2 Base Sta

33、tion Test 2-40 2.17 Voice Call set-up with RC 11 and RC 8 and SO 73/ SO 68/ SO 3 2-40 2.17.1 Mobile Station Test 2-40 2.17.2 Base Station Test 2-43 2.18 Radio Configuration Parameters Message Processing 2-43 2.18.1 Mobile Station Test 2-43 2.18.2 Base Station Test 2-45 2.19 GEM Processing for Radio

34、Configuration Parameters Record Processing 2-48 2.19.1 Mobile Station Test 2-48 2.19.2 Base Station Test 2-50 2.20 Mobile Station Reject Order generation for GEM 2-50 2.20.1 Mobile Station Test 2-50 2.20.2 Base Station Test 2-52 2.21 Forward Link Error with RC11/RC12 2-52 2.21.1 Mobile Station Test

35、2-52 2.21.2 Base Station Test 2-55 2.22 Traffic Channel Assignment in QoF 2-55 2.22.1 Mobile Station Test 2-55 2.23 Call Recovery Request Message 2-56 2.23.1 Mobile Station Test 2-56 2.23.2 Base Station Test 2-58 2.24 General Overhead Information Message 2-58 2.24.1 Mobile Station Test 2-58 2.24.2 B

36、ase Station Test 2-59 2.25 Additional Geo Location Type Record 2-59 2.25.1 Mobile Station Test 2-59 2.25.2 Base Station Test 2-60 2.26 SO 33 call set-up with RC 11 and RC 8 2-60 3GPP2 C.S0043-B v1.0 iv 2.26.1 Mobile Station Test 2-60 2.26.2 Base Station Test 2-61 2.27 SO 33 Fast Connection Setup 2-6

37、2 2.27.1 Mobile Station Test 2-62 2.27.2 Base Station Test 2-64 2.28 Direct Channel Assignment 2-64 2.28.1 Mobile Station Test 2-64 2.29 Extended Slot Cycle Index 2-65 2.29.1 Mobile Station Test 2-65 2.29.2 Base Station Test 2-66 3 Idle handoff 3-1 3.1 PCH only is available in neighbor BS, NGHBR_CON

38、FIG= 000 3-1 3.1.1 Mobile Station test 3-1 3.1.2 Base Station Test 3-3 3.2 PCH only is available in neighbor base station, NGHBR_CONFIG= 001 3-3 3.2.1 Mobile Station test 3-3 3.2.2 Base Station test 3-5 3.3 PCH only is available in neighbor base station, NGHBR_CONFIG= 010 3-5 3.3.1 Mobile Station Te

39、st 3-5 3.3.2 Base Station test 3-7 3.4 Unknown configuration in neighbor base station, NGHBR_CONFIG= 011 3-7 3.4.1 Mobile Station test 3-7 3.4.2 Base Station Test 3-9 3.5 PCH+BCCH/FCCCH are available in neighbor base station, NGHBR_CONFIG= 000, BCCH_IND_INCL= 0 3-9 3.5.1 Mobile Station Test 3-9 3.5.

40、2 Base Station Test 3-11 3.6 PCH+BCCH/FCCCH are available in neighbor base station, NGHBR_CONFIG= 001, BCCH_IND_INCL= 0 3-11 3.6.1 Mobile Station Test 3-11 3.6.2 Base Station Test 3-13 3.7 PCH+BCCH/FCCCH are available in neighbor base station, NGHBR_CONFIG= 010, BCCH_IND_INCL= 0 3-13 3.7.1 Mobile St

41、ation Test 3-13 3.7.2 Base Station Test 3-15 3.8 PCH+BCCH/FCCCH are available in neighbor base station, BCCH_SUPPORT= 1 ( e.g. NGHBR_CONFIG= 000) 3-15 3.8.1 Mobile Station Test 3-15 3.8.2 Base Station Test 3-17 3.9 BCCH/FCCCH is available in neighbor base station, NGHBR_CONFIG= 000 3-17 3.9.1 Mobile

42、 Station test 3-17 3.9.2 Base Station Test 3-19 3.10 BCCH/FCCCH is available in neighbor base station, NGHBR_CONFIG= 010 3-19 3.10.1 Mobile Station Test 3-19 3.10.2 Base Station Test 3-21 3.11 BCCH/FCCCH is available in neighbor base station, NGHBR_CONFIG= 100 3-21 3GPP2 C.S0043-B v1.0 v 3.11.1 Mobi

43、le Station Test 3-21 3.11.2 Base Station Test 3-22 3.12 PCH ONLY is available in neighbor base station, NGHBR_CONFIG= 001 3-23 3.12.1 Mobile Station Test 3-23 3.12.2 Base Station Test 3-24 3.13 Only pilots are known in neighbor base station, NGHBR_CONFIG= 011 3-25 3.13.1 Mobile Station Test 3-25 3.1

44、3.2 Base Station test 3-26 3.14 Search Window Size and Offset (Idle State) 3-26 3.14.1 Mobile Station Test 3-26 3.14.2 Base Station Test 3-37 4 Handoff 4-1 4.1 Soft Handoff With Dynamic Threshold 4-1 4.1.1 Mobile Station Test 4-1 4.1.2 Base Station Test 4-7 4.2 Soft Handoff Without Dynamic Threshold

45、 4-11 4.2.1 Mobile Station Test 4-11 4.2.2 Base Station Test 4-18 4.3 Soft Handoff Tests During Link Failure 4-21 4.3.1 Mobile Station Test 4-21 4.3.2 Base Station Test 4-24 4.4 Search Window Size and Offset (Traffic State) 4-24 4.4.1 Mobile Station Tests 4-24 4.4.2 Base Station Test 4-37 4.5 Hard H

46、andoff Between Frequencies in the Same Band Class 4-37 4.5.1 Mobile Station Test 4-37 4.5.2 Base Station Test 4-39 4.6 Reserved 4-39 4.7 Hard handoff between Different Band Classes 4-39 4.7.1 None 4-39 4.7.2 Base Station Test 4-40 4.7.3 None 4-40 4.7.4 Base Station Test 4-42 4.8 Hard handoff with an

47、d without Return on Failure 4-42 4.8.1 Mobile Station Test 4-42 4.8.2 Base Station Test 4-44 4.9 Access Entry Handoff 4-45 4.9.1 Mobile Station Test 4-45 4.9.2 Base Station Test 4-47 4.10 Access Probe Handoff 4-47 4.10.1 Mobile Station Test 4-47 4.10.2 Base Station Test 4-49 4.11 Access Handoff 4-49

48、 4.11.1 Mobile Station Test 4-49 4.11.2 Base Station Test 4-50 4.12 Channel Assignment into A Soft HandOff 4-51 3GPP2 C.S0043-B v1.0 vi 4.12.1 Mobile Station Test 4-51 4.12.2 Base Station Test 4-51 4.13 Traffic Channel Preamble During A Hard Handoff Between Frequencies in the Same Band 4-52 4.13.1 M

49、obile Station Test 4-52 4.13.2 Base Station Test 4-54 4.14 Hopping Pilot Beacon 4-55 4.14.1 Mobile Station Test 4-55 4.14.2 Base Station Test 4-56 4.15 Hard Handoff Between Frequencies with Different Radio Configurations and different service options 4-56 4.15.1 Mobile Station Test 4-56 4.15.2 Base Station Test 4-59 4.16 Handoff on Same Frequency with Different Radio Configurations 4-59 4.16.1 Mobile Station Test 4-59 4.16.2 Base Station Test 4-61 4.17 Hard handoff While in the Waiting for Mobile Station Answer Substate 4-61 4.17.1 Mobile Station Test 4-6