1、 TIA STANDARD Interoperability Test Specification for cdma2000Air Interface TIA-1036 January 2005 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of Copyright Telecommunications Industry Association Provided by IHS under licens
2、e with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and imp
3、rovement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not
4、conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Inst
5、itute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regul
6、atory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0155, formulated under the cognizance of the TIA TR-45.5Subcommit
7、tee on Spread Spectrum Digital Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2004 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING P
8、UBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under licens
9、e with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For co
10、pyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Associati
11、on Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Docu
12、ment may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs at
13、tention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing
14、terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied
15、with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRE
16、SS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DI
17、SCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR
18、 PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAM
19、AGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT
20、 OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1036 i CONTENT
21、S 1 FOREWORD 1 2 Introduction . 1 3 Testing Objective 1 4 Execution Strategy 1 5 Supplementary Terms and Definitions . 2 6 Tolerances 16 7 Normative Document References 17 8 1 Miscellaneous Air Interface Tests 1-1 9 1.1 Call Setup under Various PSIST Settings 1-1 10 1.2 Registration Attempts with Di
22、fferent PSIST Settings 1-6 11 1.3 Short Message Service with Different PSIST Settings 1-7 12 1.4 Quick Paging Channel CCI 1-9 13 1.5 Mobile Station Response to Status Request Message . 1-11 14 1.6 SYNC Channel Support for Mobile Stations not capable of TD, or not capable of QPCH 15 or RC2 . 1-13 16
23、1.7 Sync Channel support for Mobile Stations not capable of TD, but capable of QPCH or 17 RC21-15 18 1.8 Sync Channel Support for Mobile Stations capable of TD and QPCH or RC2. 1-17 19 1.9 Hashing F-CCCH, F-CCCH slot. 1-20 20 1.10 CDMA Channel Hashing on F-PCH for Mobile Stations not capable of QPCH
24、 or RC221 1-21 22 1.11 CDMA Channel Hashing on F-PCH for Mobile Stations capable of QPCH or RC21-22 23 1.12 CDMA Channel Hashing on F-BCCH; Mobile Station not capable of either TD or 24 QPCH (RC2) 1-23 25 1.13 CDMA Channel Hashing on F-BCCH; Mobile Station not capable of TD (STS) but 26 capable of Q
25、PCH (RC2). 1-24 27 1.14 CDMA Channel Hashing on F-BCCH; Mobile Station capable of both TD (STS) and 28 QPCH (RC2) 1-26 29 1.15 F-CCCH SUPPORT 1-27 30 1.16 Paging Indicator on the Quick Paging Channel 1-28 31 2 Basic Call Processing Tests 2-1 32 2.1 Mobile Originated Voice Calls 2-1 33 2.2 Mobile Sta
26、tion Terminated Voice Calls 2-3 34 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1036 ii 2.3 Busy Tone. 2-6 1 2.4 Mobile Station Origination Call with Inter Band Channel A
27、ssignment . 2-7 2 2.5 Mobile Station Terminated Call with Inter Band Channel Assignment. 2-8 3 2.6 DTMF 2-9 4 2.7 Slot Cycle Index 2-10 5 2.8 Reverse Radio Link Failure . 2-11 6 2.9 Channel Assignment from CDMA to AMPS . 2-13 7 2.10 Network Busy 2-14 8 2.11 Release Order on the Access Channel 2-14 9
28、 2.12 True IMSI Support, Land Party to Mobile Station Call, Matching MCC and IMSI_11_12, 10 True IMSI addressing supported by the base station and mobile station . 2-15 11 2.13 True IMSI Support, Land Party to Mobile Station Call, Matching MCC and IMSI_11_12, 12 True IMSI addressing supported by the
29、 base station with MIN-based addressing supported by 13 the mobile station. 2-16 14 2.14 True IMSI Support, Land Party to Mobile Station Call, Matching MCC and IMSI_11_12, 15 True IMSI addressing not supported by the base station. 2-17 16 2.15 True IMSI Support, Land Party to Mobile Station Call, Di
30、fferent MCC and IMSI_11_1217 2-18 18 2.16 PACA Origination, User Terminates While Still In Queue. 2-19 19 2.17 PACA Origination, Idle Handoff While in Queue. 2-20 20 2.18 PACA Origination, Traffic Channel Becomes Available 2-21 21 2.19 PACA Origination, Features Interaction. 2-22 22 2.20 PACA Origin
31、ation, Permanent Invocation 2-23 23 2.21 PACA Origination, PACA Disabled for Mobile Station 2-24 24 2.22 Service Configuration and Negotiation without SYNC_ID. 2-25 25 2.23 Service Configuration and Negotiation with SYNC_ID . 2-29 26 2.24 Intra-Band Channel Assignment 2-32 27 2.25 Silent-Retry. 2-33
32、 28 2.26 MSID, MCC, and IMSI. 2-35 29 3 Handoff Tests 3-1 30 3.1 Soft Handoff with Dynamic Threshold 3-1 31 3.2 Soft Handoff without Dynamic Threshold . 3-5 32 3.3 Hard Handoff Between Frequencies in the Same Band Class 3-9 33 3.4 Hard Handoff from CDMA to AMPS. 3-11 34 Copyright Telecommunications
33、Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1036 iii 3.5 Soft Handoff in Fading. 3-12 1 3.6 Hard Handoff in Fading . 3-16 2 3.7 Hard Handoff Between Different Band Classes 3-18 3 3.8 Hard Handoff wi
34、th and without Return on Failure. 3-19 4 3.9 Search Window Size and Offset (Traffic State) 3-21 5 3.10 Search Window Size and Offset (Idle State) 3-30 6 3.11 Channel Assignment into Soft Handoff (CASHO). 3-37 7 3.12 Traffic Channel Preamble during Hard Handoff Between Frequencies in same band . 3-8
35、38 9 3.13 Hopping Pilot Beacon 3-40 10 3.14 Hard Handoff between Frequencies with Different Radio Configurations 3-41 11 3.15 Handoff on Same Frequency with Different Radio Configurations 3-43 12 3.16 Hard Handoff while in the Waiting for Mobile Station Answer Substate 3-45 13 3.17 Inter-Frequency H
36、ard Handoff (CDMA to CDMA) 3-46 14 3.18 Inter-Frequency Hard Handoff (CDMA to AMPS). 3-48 15 3.19 Hard Handoff between Frequencies with Different Protocol Revisions . 3-50 16 4 Power Control . 4-1 17 4.1 Forward Traffic Channel Power Control . 4-1 18 4.2 Fast Forward Power Control (FFPC) 4-4 19 4.3
37、Lowest Rate Reverse Fundamental Channel Gating 4-46 20 4.4 R-FCH Gating during Soft Handoff 4-48 21 5 Registrations .5-1 22 5.1 Power-Up Registration 5-1 23 5.2 Power - Down Registration 5-3 24 5.3 Distance-Based Registration . 5-5 25 5.4 Timer-Based Registration 5-8 26 5.5 Parameter-Change Registra
38、tion 5-9 27 5.6 Zone-Based Registration. 5-10 28 6 AUTHENTICATION. 6-1 29 6.1 Shared Secret Data (SSD) Initialized when A-Key is Changed. 6-1 30 6.2 Shared Secret Data Update. 6-2 31 6.3 Mismatched A-Keys 6-4 32 6.4 Activating Voice Privacy on Call Setup 6-5 33 Copyright Telecommunications Industry
39、Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1036 iv 6.5 Activating Voice Privacy at the Mobile Station When a Call Is Active 6-6 1 6.6 Signaling Message Encryption on Forward Traffic Channel 6-7 2 6.7 Signal
40、ing Message Encryption on Reverse Traffic Channel . 6-8 3 6.8 Hard Handoffs between Base Stations with Signaling Message Encryption Active . 6-9 4 6.9 Authentication upon Originations . 6-11 5 6.10 Hard Handoff from CDMA to AMPS with Signaling Message Encryption Active . 6-12 6 7 Service Redirection
41、 test cases. 7-1 7 7.1 Global Service Redirection between Band Classes 7-1 8 7.2 Global Service Redirection between CDMA and a Non-CDMA System 7-2 9 7.3 Global Service Redirection between Channels in the Same Band Class 7-4 10 7.4 Service Redirection between Band Classes. 7-5 11 7.5 Service Redirect
42、ion between CDMA and a Non-CDMA System . 7-6 12 7.6 Service Redirection between Channels in the Same Band Class . 7-8 13 7.7 Extended Global Service Redirection between Band Classes 7-9 14 7.8 Extended Global Service Redirection between CDMA and a Non-CDMA System 7-10 15 7.9 Extended Global Service
43、Redirection between Channels in the Same Band Class. 7-12 16 8 Short Message Service 8-1 17 8.1 Mobile Station Terminated SMS Tests. 8-1 18 8.2 Mobile Station Originated SMS Tests 8-8 19 8.3 Broadcast SMS Tests 8-14 20 8.4 Mobile Station Terminated Enhanced Messaging Services EMS Tests: . 8-16 21 8.
44、5 Mobile Station Originated Enhanced Messaging Services EMS Tests:. 8-24 22 9 Subscriber Calling Features. 9-1 23 9.1 Call Forwarding Unconditional (CFU). 9-1 24 9.2 Call Forwarding Busy (CFB) 9-1 25 9.3 Call Forwarding Default (CFD). 9-2 26 9.4 Call Forwarding No Answer (CFNA) 9-3 27 9.5 Three-Way
45、Calling. 9-4 28 9.6 Call Alerting. 9-5 29 9.7 Caller ID for Mobile station Terminated Call Setup. 9-6 30 9.8 Caller ID for Call Waiting . 9-7 31 9.9 Call Waiting. 9-8 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networkin
46、g permitted without license from IHS-,-,-TIA-1036 v 9.10 Voice Mail Message Waiting Notification from the Idle State 9-9 1 9.11 Voice Mail Message Waiting Notification from the Conversation State . 9-10 2 9.12 Calling Name Presentation (CNAP) for Mobile station Terminated Call Setup 9-11 3 9.13 Call
47、ing Name Presentation (CNAP) from Conversation State. 9-12 4 9.14 Calling Name Presentation (CNAP) with Forwarding . 9-13 5 9.15 Display Records sent in the Feature Notification Message. 9-14 6 9.16 Display Records Sent in the Flash With Information Message 9-15 7 9.17 Display Records Sent in the Al
48、ert with Information Message 9-16 8 9.18 TTY/TDD 9-17 9 9.19 WLL Call Waiting Indicator Support . 9-20 10 9.20 Answer Holding. 9-21 11 9.21 User Selective Call Forwarding . 9-23 12 10 Asynchronous Data and Fax Services . 10-1 13 10.1 Send/Receive Fax. 10-1 14 10.2 Upload/Download Binary File 10-3 15
49、 10.3 Simultaneous Two-way File Transfer/Carrier Detect 10-4 16 10.4 Compound AT Command, Initialization and Connection Delay. 10-6 17 10.5 Escaping to Command Mode 10-7 18 10.6 Air Interface Data Compression. 10-8 19 10.7 RLP Operation in a Poor RF Environment . 10-10 20 10.8 RLP Abort and TCP Retransmit Test. 10-11 21 10.9 Internet Control Message Protocol (ICMP) Requests/Replies 10-13 22 10.10 Reflection of AT Command Paramete
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1