TIA-1054-1-2006 High Rate Packet Data Supplemental Packet Data Services Addendum 1 Addendum to TIA-1054《高速分组数据 增补分组数据服务 补遗1》.pdf

1、 TIA STANDARD High Rate Packet Data Supplemental Packet Data Services Addendum 1 TIA-1054-1 (Addendum to TIA-1054) December 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommunications In

2、dustry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purc

3、hasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of

4、TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accor

5、dance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems

6、associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0181-AD1, formulated under th

7、e cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice

8、of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claim

9、ed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discu

10、ssions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Ma

11、nual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specif

12、ication, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assuran

13、ce relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the

14、other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or

15、 any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS N

16、ONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH

17、 EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,

18、-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITI

19、GATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CO

20、NTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1054-1 CONTENTS i FOREWORDx 1 NOTES . xi 2 REFERENCES xi 3 1 O

21、verview .1-1 4 1.1 Scope of This Document1-1 5 1.2 Requirements Language 1-1 6 1.3 Architecture Reference Model 1-1 7 1.4 Protocols .1-2 8 1.4.1 Interfaces 1-2 9 1.4.2 States 1-3 10 1.5 Terms1-3 11 1.6 Notation 1-4 12 2 Enhanced Multi-Flow Packet Application 2-1 13 2.1 Introduction 2-1 14 2.1.1 Gene

22、ral Overview.2-1 15 2.1.2 Public Data2-4 16 2.1.3 Data Encapsulation for the InUse Instance of the Application2-4 17 2.2 Protocol Initialization.2-4 18 2.2.1 Protocol Initialization for the InConfiguration Application Instance2-4 19 2.3 Procedures and Messages for the InConfiguration Instance of the

23、 Packet 20 Application 2-5 21 2.3.1 Procedures 2-5 22 2.3.2 Commit Procedures .2-6 23 2.3.3 Message Formats.2-7 24 2.3.3.1 ConfigurationRequest 2-7 25 2.3.3.2 ConfigurationResponse 2-8 26 2.4 Route Selection Protocol 2-9 27 2.4.1 Overview2-9 28 2.4.2 Primitives and Public Data.2-9 29 2.4.2.1 Command

24、s 2-9 30 2.4.2.2 Return Indications.2-9 31 2.4.3 Protocol Data Unit .2-9 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1054-1 CONTENTS ii 2.4.4 Procedures and Messages

25、for the InUse Instance of the Protocol .2-9 1 2.4.4.1 Procedures 2-9 2 2.4.4.1.1 General Requirements .2-9 3 2.4.4.1.2 Access Terminal Requirements 2-10 4 2.4.4.1.2.1 A Open B Setting State 2-10 5 2.4.4.1.2.1.1 State Transitions2-10 6 2.4.4.1.2.1.2 Transmitter Requirements2-11 7 2.4.4.1.2.1.3 Receiv

26、er Requirements if TwoRoutesSupported is 0x002-11 8 2.4.4.1.2.1.4 Receiver Requirements if TwoRoutesSupported is 0x012-11 9 2.4.4.1.2.2 A Open B Rising State2-12 10 2.4.4.1.2.2.1 State Transitions2-12 11 2.4.4.1.2.2.2 Transmitter Requirements2-12 12 2.4.4.1.2.2.3 Receiver Requirements.2-12 13 2.4.4.

27、1.2.3 A Setting B Open State 2-12 14 2.4.4.1.2.3.1 State Transitions2-12 15 2.4.4.1.2.3.2 Transmitter Requirements2-12 16 2.4.4.1.2.3.3 Receiver Requirements.2-12 17 2.4.4.1.2.4 A Rising B Open State2-13 18 2.4.4.1.2.4.1 State Transitions2-13 19 2.4.4.1.2.4.2 Transmitter Requirements2-13 20 2.4.4.1.

28、2.4.3 Receiver Requirements.2-13 21 2.4.4.1.3 Access Network Requirements .2-14 22 2.4.4.2 Message Formats.2-14 23 2.4.4.2.1 RouteSelect2-14 24 2.4.4.2.2 RouteSelectAck2-14 25 2.4.4.2.3 ActivateRoute 2-15 26 2.4.4.2.4 ActivateRouteAck.2-16 27 2.4.4.3 Interface to Other Protocols .2-16 28 2.4.4.3.1 C

29、ommands 2-16 29 2.4.4.3.2 Indications.2-16 30 2.4.5 Protocol Numeric Constants 2-16 31 2.5 Radio Link Protocol .2-17 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1054-

30、1 CONTENTS iii 2.5.1 Overview2-17 1 2.5.2 Primitives and Public Data.2-17 2 2.5.2.1 Commands 2-17 3 2.5.2.2 Return Indications.2-17 4 2.5.3 Protocol Data Unit .2-17 5 2.5.4 Procedures and Messages for the InUse Instance of the Protocol2-17 6 2.5.4.1 Procedures.2-17 7 2.5.4.1.1 Initialization and Res

31、et.2-21 8 2.5.4.1.1.1 Initialization Procedure 2-22 9 2.5.4.1.1.1.1 Initialization Procedure for the RLP Transmitter .2-22 10 2.5.4.1.1.1.2 Initialization Procedure for the RLP Receiver.2-22 11 2.5.4.1.1.2 Reset Procedure .2-22 12 2.5.4.1.1.2.1 Reset Procedure for the Initiating Side when it is an R

32、LP 13 Transmitter .2-22 14 2.5.4.1.1.2.2 Reset Procedure for Initiating Side when it is an RLP 15 Receiver.2-23 16 2.5.4.1.1.2.3 Reset Procedure for the Responding Side when it is an RLP 17 Receiver.2-23 18 2.5.4.1.1.2.4 Reset Procedure for the Responding Side when it is an RLP 19 transmitter 2-23 2

33、0 2.5.4.1.1.2.5 RLP Reset Message Flows .2-24 21 2.5.4.2 Data Transfer.2-24 22 2.5.4.2.1 RLP Transmit Procedures.2-24 23 2.5.4.2.1.1 Reservation State Maintenance 2-27 24 2.5.4.2.1.1.1 State-independent Requirements2-28 25 2.5.4.2.1.1.1.1 Access Terminal Requirements .2-28 26 2.5.4.2.1.1.1.2 Access

34、Network Requirements 2-29 27 2.5.4.2.1.1.2 Close State .2-30 28 2.5.4.2.1.1.2.1 Access Terminal Requirements .2-30 29 2.5.4.2.1.1.2.2 Access Network Requirements 2-30 30 2.5.4.2.1.1.3 Open State .2-31 31 2.5.4.2.1.1.3.1 Access Terminal Requirements .2-31 32 2.5.4.2.1.1.3.2 Access Network Requirement

35、s 2-32 33 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1054-1 CONTENTS iv 2.5.4.2.2 RLP Receive Procedures.2-33 1 2.5.4.3 RLP Packet Header 2-36 2 2.5.4.4 Message Formats

36、.2-37 3 2.5.4.4.1 ResetTxIndication 2-37 4 2.5.4.4.2 ResetRxIndication2-38 5 2.5.4.4.3 ResetTxIndicationAck 2-38 6 2.5.4.4.4 ResetTxComplete .2-39 7 2.5.4.4.5 ResetRxComplete.2-39 8 2.5.4.4.6 Nak2-40 9 2.5.4.4.7 ReservationOnRequest.2-42 10 2.5.4.4.8 ReservationOffRequest.2-43 11 2.5.4.4.9 Reservati

37、onAccept .2-44 12 2.5.4.4.10 ReservationReject 2-45 13 2.5.4.4.11 RevReservationOn2-46 14 2.5.4.4.12 RevReservationOff2-47 15 2.5.4.4.13 FwdReservationOff.2-47 16 2.5.4.4.14 FwdReservationOn.2-48 17 2.5.4.4.15 FwdReservationAck2-49 18 2.5.4.4.16 AttributeUpdateRequest.2-49 19 2.5.4.4.17 AttributeUpd

38、ateAccept.2-50 20 2.5.4.4.18 AttributeUpdateReject2-50 21 2.5.4.5 Interface to Other Protocols .2-51 22 2.5.4.5.1 Commands 2-51 23 2.5.4.5.2 Indications.2-51 24 2.5.4.6 RLP Packet Priorities .2-51 25 2.5.5 Protocol Numeric Constants 2-51 26 2.6 Data Over Signaling Protocol.2-53 27 2.6.1 Overview .2-

39、53 28 2.6.2 Primitives and Public Data 2-53 29 2.6.2.1 Commands2-53 30 2.6.2.2 Return Indications.2-53 31 2.6.3 Protocol Data Unit.2-53 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license fro

40、m IHS-,-,-TIA-1054-1 CONTENTS v 2.6.4 Procedures and Messages for the InUse Instance of the Protocol2-53 1 2.6.4.1 Procedures.2-53 2 2.6.4.2 Message Formats .2-54 3 2.6.4.2.1 DataOverSignaling .2-54 4 2.6.4.2.2 DataOverSignalingAck .2-56 5 2.6.4.3 Interface to Other Protocols .2-56 6 2.6.4.3.1 Comma

41、nds.2-56 7 2.6.4.3.2 Indications.2-56 8 2.7 Location Update Protocol.2-57 9 2.7.1 Overview2-57 10 2.7.2 Primitives and Public Data.2-57 11 2.7.2.1 Commands 2-57 12 2.7.2.2 Return Indications.2-57 13 2.7.3 Protocol Data Unit .2-57 14 2.7.4 Procedures and Messages for the InUse Instance of the Protoco

42、l2-57 15 2.7.4.1 Procedures.2-57 16 2.7.4.1.1 Access Network Requirements2-57 17 2.7.4.1.2 Access Terminal Requirements.2-57 18 2.7.4.2 Message Formats .2-58 19 2.7.4.2.1 LocationRequest.2-58 20 2.7.4.2.2 LocationNotification .2-58 21 2.7.4.2.3 LocationAssignment.2-59 22 2.7.4.2.4 LocationComplete 2

43、-60 23 2.7.4.2.5 StorageBLOBRequest.2-61 24 2.7.4.2.6 StorageBLOBNotification2-61 25 2.7.4.2.7 StorageBLOBAssignment .2-62 26 2.7.4.2.8 StorageBLOBComplete.2-63 27 2.7.4.3 Interface to Other Protocols .2-63 28 2.7.4.3.1 Commands.2-63 29 2.7.4.3.2 Indications.2-63 30 2.8 Flow Control Protocol 2-64 31

44、 2.8.1 Overview2-64 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1054-1 CONTENTS vi 2.8.2 Primitives and Public Data 2-65 1 2.8.2.1 Commands2-65 2 2.8.2.2 Return Indic

45、ations.2-65 3 2.8.3 Protocol Data Unit.2-65 4 2.8.4 Procedures and Messages for the InUse Instance of the Protocol .2-65 5 2.8.4.1 Procedures 2-65 6 2.8.4.1.1 Transmission and Processing of DataReady Message .2-65 7 2.8.4.1.2 Transmission and Processing of RestartNetworkInterface Message 2-65 8 2.8.

46、4.1.3 Close State 2-65 9 2.8.4.1.3.1 Access Terminal Requirements 2-65 10 2.8.4.1.3.2 Access Network Requirements .2-66 11 2.8.4.1.4 Open State.2-66 12 2.8.4.1.4.1 Access Terminal Requirements 2-66 13 2.8.4.1.4.2 Access Network Requirements .2-67 14 2.8.4.2 Message Formats.2-67 15 2.8.4.2.1 XonReque

47、st .2-67 16 2.8.4.2.2 XonResponse.2-67 17 2.8.4.2.3 XoffRequest .2-67 18 2.8.4.2.4 XoffResponse .2-68 19 2.8.4.2.5 DataReady.2-68 20 2.8.4.2.6 DataReadyAck .2-68 21 2.8.4.2.7 RestartNetworkInterface 2-69 22 2.8.4.2.8 RestartNetworkInterfaceAck.2-69 23 2.8.5 Interface to Other Protocols.2-70 24 2.8.5

48、.1 Commands2-70 25 2.8.5.2 Indications 2-70 26 2.8.6 Protocol Numeric Constants 2-70 27 2.9 Configuration Attributes for the Enhanced Multi-Flow Packet Application.2-71 28 2.9.1 Simple Attributes 2-73 29 2.9.2 Complex Attributes .2-81 30 2.9.2.1 FlowNNTimersFwd Attribute 2-81 31 2.9.2.2 FlowNNTimers

49、Rev Attribute.2-82 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-1054-1 CONTENTS vii 2.9.2.3 FlowNNReservationFwd Attribute.2-83 1 2.9.2.4 FlowNNReservationRev Attribute2-84 2 2.9.2.5 ATSupportedFlowP