TIA-1054-B-2011 cdma2000 High Rate Packet Data Supplemental Services《Cdma2000高速率分组数据补充性服务》.pdf

1、 TIA-1054-B February 2011cdma2000 High Rate Packet Data Supplemental Services NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of pro

2、ducts, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to s

3、uch Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) pa

4、tent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requireme

5、nts. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0181-RV2, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance

6、 that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectu

7、al property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder t

8、hereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead

9、 left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its c

10、ontents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference

11、consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy

12、of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a clai

13、m of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. A

14、LL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHT

15、S. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO

16、 IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAM

17、AGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A

18、FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. This page intentionally left blank.3GPP2 C.S0063-B v1.0 CONTENTS i FOREWORD . xxi 1 NOTES . xxiii 2 REFERENCES xxiii 3 1 Overview . 1-1 4 1.1 Scope of This Document 1-1 5

19、 1.2 Requirements Language 1-1 6 1.3 Architecture Reference Model 1-1 7 1.4 Protocols . 1-2 8 1.4.1 Interfaces 1-2 9 1.4.2 States 1-3 10 1.5 Terms 1-3 11 1.6 Notation 1-4 12 2 Enhanced Multi-Flow Packet Application 2-1 13 2.1 Introduction 2-1 14 2.1.1 General Overview . 2-1 15 2.1.2 Public Data 2-3

20、16 2.1.3 Data Encapsulation for the InUse Instance of the Application 2-3 17 2.2 Protocol Initialization . 2-4 18 2.2.1 Protocol Initialization for the InConfiguration Application Instance 2-4 19 2.3 Procedures and Messages for the InConfiguration Instance of the Packet 20 Application 2-5 21 2.3.1 P

21、rocedures 2-5 22 2.3.2 Commit Procedures . 2-5 23 2.3.3 Message Formats . 2-7 24 2.3.3.1 ConfigurationRequest 2-7 25 2.3.3.2 ConfigurationResponse 2-7 26 2.4 Route Selection Protocol 2-9 27 2.4.1 Overview 2-9 28 2.4.2 Primitives and Public Data . 2-9 29 2.4.2.1 Commands 2-9 30 2.4.2.2 Return Indicat

22、ions . 2-9 31 2.4.3 Protocol Data Unit . 2-9 32 3GPP2 C.S0063-B v1.0 CONTENTS ii 2.4.4 Procedures and Messages for the InUse Instance of the Protocol . 2-9 1 2.4.4.1 Procedures 2-9 2 2.4.4.1.1 General Requirements . 2-9 3 2.4.4.1.2 Access Terminal Requirements 2-9 4 2.4.4.1.2.1 A Open B Setting Stat

23、e 2-10 5 2.4.4.1.2.1.1 State Transitions 2-10 6 2.4.4.1.2.1.2 Transmitter Requirements 2-11 7 2.4.4.1.2.1.3 Receiver Requirements if TwoRoutesSupported is 0x00 2-11 8 2.4.4.1.2.1.4 Receiver Requirements if TwoRoutesSupported is 0x01 2-11 9 2.4.4.1.2.2 A Open B Rising State 2-11 10 2.4.4.1.2.2.1 Stat

24、e Transitions 2-11 11 2.4.4.1.2.2.2 Transmitter Requirements 2-12 12 2.4.4.1.2.2.3 Receiver Requirements . 2-12 13 2.4.4.1.2.3 A Setting B Open State 2-12 14 2.4.4.1.2.3.1 State Transitions 2-12 15 2.4.4.1.2.3.2 Transmitter Requirements 2-12 16 2.4.4.1.2.3.3 Receiver Requirements . 2-12 17 2.4.4.1.2

25、.4 A Rising B Open State 2-13 18 2.4.4.1.2.4.1 State Transitions 2-13 19 2.4.4.1.2.4.2 Transmitter Requirements 2-13 20 2.4.4.1.2.4.3 Receiver Requirements . 2-13 21 2.4.4.1.3 Access Network Requirements . 2-13 22 2.4.4.2 Message Formats . 2-14 23 2.4.4.2.1 RouteSelect 2-14 24 2.4.4.2.2 RouteSelectA

26、ck 2-14 25 2.4.4.2.3 ActivateRoute 2-15 26 2.4.4.2.4 ActivateRouteAck . 2-15 27 2.4.4.3 Interface to Other Protocols . 2-16 28 2.4.4.3.1 Commands 2-16 29 2.4.4.3.2 Indications . 2-16 30 2.4.5 Protocol Numeric Constants 2-16 31 2.5 Radio Link Protocol . 2-17 32 3GPP2 C.S0063-B v1.0 CONTENTS iii 2.5.1

27、 Overview 2-17 1 2.5.2 Primitives and Public Data . 2-17 2 2.5.2.1 Commands 2-17 3 2.5.2.2 Return Indications . 2-17 4 2.5.3 Protocol Data Unit . 2-17 5 2.5.4 Procedures and Messages for the InUse Instance of the Protocol 2-17 6 2.5.4.1 Procedures . 2-17 7 2.5.4.1.1 Initialization and Reset. 2-21 8

28、2.5.4.1.1.1 Initialization Procedure 2-22 9 2.5.4.1.1.1.1 Initialization Procedure for the RLP Transmitter . 2-22 10 2.5.4.1.1.1.2 Initialization Procedure for the RLP Receiver . 2-22 11 2.5.4.1.1.2 Reset Procedure . 2-22 12 2.5.4.1.1.2.1 Reset Procedure for the Initiating Side when it is an RLP 13

29、Transmitter . 2-22 14 2.5.4.1.1.2.2 Reset Procedure for Initiating Side when it is an RLP 15 Receiver . 2-23 16 2.5.4.1.1.2.3 Reset Procedure for the Responding Side when it is an RLP 17 Receiver . 2-23 18 2.5.4.1.1.2.4 Reset Procedure for the Responding Side when it is an RLP 19 transmitter 2-23 20

30、 2.5.4.1.1.2.5 RLP Reset Message Flows . 2-24 21 2.5.4.2 Data Transfer . 2-24 22 2.5.4.2.1 RLP Transmit Procedures . 2-24 23 2.5.4.2.1.1 Reservation State Maintenance 2-26 24 2.5.4.2.1.1.1 State-independent Requirements 2-28 25 2.5.4.2.1.1.1.1 Access Terminal Requirements . 2-28 26 2.5.4.2.1.1.1.2 A

31、ccess Network Requirements 2-29 27 2.5.4.2.1.1.2 Close State . 2-30 28 2.5.4.2.1.1.2.1 Access Terminal Requirements . 2-30 29 2.5.4.2.1.1.2.2 Access Network Requirements 2-31 30 2.5.4.2.1.1.3 Open State . 2-31 31 2.5.4.2.1.1.3.1 Access Terminal Requirements . 2-31 32 2.5.4.2.1.1.3.2 Access Network R

32、equirements 2-32 33 3GPP2 C.S0063-B v1.0 CONTENTS iv 2.5.4.2.2 RLP Receive Procedures . 2-33 1 2.5.4.3 RLP Packet Header 2-36 2 2.5.4.4 Message Formats . 2-37 3 2.5.4.4.1 ResetTxIndication 2-37 4 2.5.4.4.2 ResetRxIndication 2-37 5 2.5.4.4.3 ResetTxIndicationAck 2-38 6 2.5.4.4.4 ResetTxComplete . 2-3

33、8 7 2.5.4.4.5 ResetRxComplete . 2-39 8 2.5.4.4.6 Nak 2-40 9 2.5.4.4.7 ReservationOnRequest . 2-41 10 2.5.4.4.8 ReservationOffRequest . 2-43 11 2.5.4.4.9 ReservationAccept . 2-44 12 2.5.4.4.10 ReservationReject 2-44 13 2.5.4.4.11 RevReservationOn 2-46 14 2.5.4.4.12 RevReservationOff 2-47 15 2.5.4.4.1

34、3 FwdReservationOff . 2-47 16 2.5.4.4.14 FwdReservationOn . 2-48 17 2.5.4.4.15 FwdReservationAck 2-49 18 2.5.4.4.16 AttributeUpdateRequest. 2-49 19 2.5.4.4.17 AttributeUpdateAccept . 2-50 20 2.5.4.4.18 AttributeUpdateReject 2-50 21 2.5.4.5 Interface to Other Protocols . 2-51 22 2.5.4.5.1 Commands 2-

35、51 23 2.5.4.5.2 Indications . 2-51 24 2.5.4.6 RLP Packet Priorities . 2-51 25 2.5.5 Protocol Numeric Constants 2-51 26 2.6 Data Over Signaling Protocol . 2-53 27 2.6.1 Overview . 2-53 28 2.6.2 Primitives and Public Data 2-53 29 2.6.2.1 Commands 2-53 30 2.6.2.2 Return Indications . 2-53 31 2.6.3 Prot

36、ocol Data Unit . 2-53 32 3GPP2 C.S0063-B v1.0 CONTENTS v 2.6.4 Procedures and Messages for the InUse Instance of the Protocol 2-53 1 2.6.4.1 Procedures . 2-53 2 2.6.4.2 Message Formats . 2-54 3 2.6.4.2.1 DataOverSignaling . 2-54 4 2.6.4.2.2 DataOverSignalingAck . 2-56 5 2.6.4.3 Interface to Other Pr

37、otocols . 2-56 6 2.6.4.3.1 Commands . 2-56 7 2.6.4.3.2 Indications . 2-56 8 2.7 Location Update Protocol . 2-57 9 2.7.1 Overview 2-57 10 2.7.2 Primitives and Public Data . 2-57 11 2.7.2.1 Commands 2-57 12 2.7.2.2 Return Indications . 2-57 13 2.7.3 Protocol Data Unit . 2-57 14 2.7.4 Procedures and Me

38、ssages for the InUse Instance of the Protocol 2-57 15 2.7.4.1 Procedures . 2-57 16 2.7.4.1.1 Access Network Requirements 2-57 17 2.7.4.1.2 Access Terminal Requirements . 2-57 18 2.7.4.2 Message Formats . 2-58 19 2.7.4.2.1 LocationRequest . 2-58 20 2.7.4.2.2 LocationNotification . 2-58 21 2.7.4.2.3 L

39、ocationAssignment . 2-59 22 2.7.4.2.4 LocationComplete 2-60 23 2.7.4.2.5 StorageBLOBRequest . 2-61 24 2.7.4.2.6 StorageBLOBNotification 2-61 25 2.7.4.2.7 StorageBLOBAssignment . 2-62 26 2.7.4.2.8 StorageBLOBComplete . 2-62 27 2.7.4.3 Interface to Other Protocols . 2-63 28 2.7.4.3.1 Commands . 2-63 2

40、9 2.7.4.3.2 Indications . 2-63 30 2.8 Flow Control Protocol 2-64 31 2.8.1 Overview 2-64 32 3GPP2 C.S0063-B v1.0 CONTENTS vi 2.8.2 Primitives and Public Data 2-65 1 2.8.2.1 Commands 2-65 2 2.8.2.2 Return Indications . 2-65 3 2.8.3 Protocol Data Unit . 2-65 4 2.8.4 Procedures and Messages for the InUs

41、e Instance of the Protocol . 2-65 5 2.8.4.1 Procedures 2-65 6 2.8.4.1.1 Transmission and Processing of DataReady Message . 2-65 7 2.8.4.1.2 Transmission and Processing of RestartNetworkInterface Message 2-65 8 2.8.4.1.3 Close State 2-65 9 2.8.4.1.3.1 Access Terminal Requirements 2-65 10 2.8.4.1.3.2

42、Access Network Requirements . 2-66 11 2.8.4.1.4 Open State . 2-66 12 2.8.4.1.4.1 Access Terminal Requirements 2-66 13 2.8.4.1.4.2 Access Network Requirements . 2-66 14 2.8.4.2 Message Formats . 2-67 15 2.8.4.2.1 XonRequest . 2-67 16 2.8.4.2.2 XonResponse . 2-67 17 2.8.4.2.3 XoffRequest . 2-67 18 2.8

43、.4.2.4 XoffResponse . 2-68 19 2.8.4.2.5 DataReady . 2-68 20 2.8.4.2.6 DataReadyAck . 2-68 21 2.8.4.2.7 RestartNetworkInterface 2-69 22 2.8.4.2.8 RestartNetworkInterfaceAck . 2-69 23 2.8.5 Interface to Other Protocols . 2-70 24 2.8.5.1 Commands 2-70 25 2.8.5.2 Indications 2-70 26 2.8.6 Protocol Numer

44、ic Constants 2-70 27 2.9 Configuration Attributes for the Enhanced Multi-Flow Packet Application . 2-71 28 2.9.1 Simple Attributes 2-73 29 2.9.2 Complex Attributes . 2-81 30 2.9.2.1 FlowNNTimersFwd Attribute 2-82 31 2.9.2.2 FlowNNTimersRev Attribute . 2-82 32 3GPP2 C.S0063-B v1.0 CONTENTS vii 2.9.2.

45、3 FlowNNReservationFwd Attribute . 2-83 1 2.9.2.4 FlowNNReservationRev Attribute 2-84 2 2.9.2.5 ATSupportedFlowProtocolParametersPP Attribute 2-85 3 2.9.2.5.1 Definition of SupportedProtocolParametersValues record when the 4 Flow Protocol or Route Protocol is ROHC . 2-86 5 2.9.2.6 ATSupportedRoutePr

46、otocolParametersPP Attribute 2-87 6 2.9.2.7 ATSupportedQoSProfiles Attribute . 2-88 7 2.9.2.8 ANSupportedQoSProfiles Attribute . 2-89 8 2.9.2.9 MaxLinkFlows Attribute . 2-89 9 2.9.2.10 ReservationKKQoSRequestFwd Attribute . 2-90 10 2.9.2.11 ReservationKKQoSRequestRev Attribute 2-91 11 2.9.2.12 Reser

47、vationKKQoSResponseFwd Attribute . 2-92 12 2.9.2.13 ReservationKKQoSResponseRev Attribute 2-93 13 2.9.2.14 MaxReservations Attribute . 2-94 14 2.9.2.15 FlowNNFlowProtocolParametersFwd Attribute 2-96 15 2.9.2.15.1 Definition of ProtocolParameters record when the Flow Protocol or 16 Route Protocol is

48、ROHC. 2-97 17 2.9.2.16 FlowNNFlowProtocolParametersRev Attribute . 2-98 18 2.9.2.16.1 Definition of ProtocolParameters record attribute when the Flow 19 Protocol or Route Protocol is ROHC . 2-99 20 2.9.2.17 FlowNNRouteProtocolParametersFwd Attribute 2-100 21 2.9.2.18 FlowNNRouteProtocolParametersRev

49、 Attribute . 2-101 22 2.9.2.19 ReservationKKBCMCSFlowIDAssociation Attribute 2-102 23 2.9.2.20 ReservationKKBCMCSProgramIDAssociation Attribute 2-102 24 2.10 Session State Information 2-104 25 2.10.1 Location Parameter 2-104 26 2.10.2 FlowControlState Parameter 2-104 27 2.10.3 DataOverSignalingMessageSequence Parameter 2-105 28 2.10.4 StorageBLOB Parameter 2-106 29 2.10.5 ReservationState Parameter . 2-107 30 2.10.6 RouteState Parameter 2-108 31 3 Multi-link Multi-Flow Packet Application . 3-1 32 3.1 Introduction 3-1 33 3GPP2 C.S0063-B v1.0 CONTENTS viii 3.1.1 General Overview 3-1 1 3.1.2