TIA-1073-001-2006 Satellite Network System (SNMS) Network Layer Standard《卫星网络系统网络层路标准》.pdf

1、 TIA STANDARD Satellite Network Modem System (SNMS) Network Layer Standard TIA-1073-001 June 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA Engineering Standards and Publications are designed

2、 to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence

3、 of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA membe

4、rs, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties ad

5、opting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applica

6、bility of regulatory limitations before its use. (From Project No. 3-0209.001, formulated under the cognizance of the TIA, TR-34.1 Subcommittee onCommunications and Interoperability ). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arli

7、ngton, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards

8、/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA.Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of th

9、is document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assura

10、nce that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intelle

11、ctual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holde

12、r thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are inst

13、ead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or it

14、s contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such referen

15、ce consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs poli

16、cy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a c

17、laim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document

18、. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RI

19、GHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED

20、 TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

21、DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS

22、 A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 1 CONTENTS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Revision History. iii 1 Overview . 1 1.1

23、Objectives 1 1.2 Scope . 1 1.3 Document Organization. 2 1.4 References . 2 1.5 Abbreviations, Definitions and Symbols. 5 1.5.1 Abbreviations and Acronyms 5 1.5.2 Definitions . 6 2 System Description 8 2.1 System Overview. 8 2.2 Department of Defense (DoD) Deployment Scenario. 8 2.3 Network Reference

24、 Model 9 3 Cross Layer Communications . 11 4 IP Datagram Forwarding . 12 4.1 IP Datagram Processing 12 4.2 IP Datagram Encapsulation . 12 4.2.1 Broadcast Channel. 12 4.2.2 Interactive Channel 12 5 Addressing. 13 5.1 IP Address Definitions 13 5.1.1 IPv4 Addressing 13 5.1.2 IPv6 Addressing 14 5.2 Data

25、 Link Layer Address Definitions 15 5.3 Terrestrial Interface Address Management . 15 5.3.1 Address Resolution 15 6 QoS 19 6.1 Architecture . 19 6.2 Functional Requirements. 20 6.2.1 Traffic Classification . 20 6.2.2 Traffic Conditioning 20 6.2.3 Packet Segmentation and Reassembly (PSAR). 20 6.2.4 Se

26、rvice Classes and Per Hop Behaviours (PHB). 21 6.3 Interaction with Satellite Resource Management Functions . 22 6.3.1 Hub-Spoke Configuration . 22 6.3.2 Mesh Configuration. 22 7 Multicast24 7.1 Architecture . 24 7.2 Protocol Support 24 7.2.1 Remote Terminal Multicast Support . 24 i 7.2.2 HUB Multic

27、ast Support. 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 7.3 Considerations in Multi-beam Operations. 24 8 Performance Enhancement Functions . 25 8.1 TCP Performance Enhancement Proxy . 25 8.1.1 Requirements. 26 8.2 IP Header Compressions . 28 9 Network Management . 29 9.1 Reference Model . 29 9.2 Net

28、work Management Functions 30 9.3 Network Management Protocols and Interfaces 31 9.3.1 SNMP 31 9.3.2 MIBs 31 9.3.3 EMS Interface to NMS 32 FIGURES 17 18 19 20 21 22 23 24 25 26 27 Figure 1: SNMS Standard Document Tree 2 Figure 2: SNMS Deployment in DoD Networks8 Figure 3: SNMS Network Reference Model

29、 10 Figure 4: SNMS Address Resolution Signaling Flow17 Figure 5: SNMS QoS Functional Architecture.19 Figure 6: SNMS Configurations for TCP PEP.26 Figure 7 SNMS Network Management Reference Model .29 Figure 8 SNMP Reference Architecture.31 TABLES 28 29 30 31 32 33 34 35 36 Table 1: Network Layer Info

30、 Descriptor for IPv4 Address Assignment13 Table 2: Network Layer Info Descriptor for IPv6 Address Assignment14 Table 3: Example of a CART.16 Table 4: Major Capabilities27 Table 5: Forwarding Functionality.27 Table 6: Congestion Control Related Capabilities .28 Table 7: Minor Capabilities28 37 ii REV

31、ISION HISTORY 1 Date Revision Number Comments May 10, 2005 Version 0.1 Initial Draft July 11, 2005 Version 0.2 Updated section 5, incorporated comments August 1, 2005 Version 0.3 Updated section 10 August 12, 2005 Version 0.4 Updated section 5 on SMCP address resolution September 20, 2005 Version 0.

32、5 Updates based on the Aug. Sub-WG meeting October 5, 2005 Version 0.6 Updates based on the Sept. Sub-WG meeting December 30, 2005 Version 1.0 Resolved ballot comments, approved for publication iii 1 OVERVIEW 1 1.1 Objectives 2 3 4 5 6 The present document specifies the network and upper layer funct

33、ions of the Satellite Network Modem System (SNMS). These functions facilitate interoperability of IP services across SNMS networks, and support specific capabilities described in 1. 1.2 Scope 7 8 9 10 11 12 13 14 15 16 17 18 19 The purpose of this document is to ensure interoperability of IP service

34、s among SNMS terminals and hubs in a SNMS network that provides hub-spoke and mesh connectivity. SNMS employs standards based satellite physical and data link layer technologies 2. The present document tries to minimize dependency between network/upper layer and lower layer functions. This document

35、presents SNMS network and functional architecture, and applies existing standards to meet the interoperability requirements. In areas that lack existing standards, the present document specifies the minimum requirements for interoperability. This document is part of the TIA/EIA SNMS standard suite (

36、Figure 1) that defines the SNMS functional capabilities, network and system architectures, interoperability requirements, and protocols. SNMS Network Layer Protocols(TIA/EIA-1073-001)DVB-RCS GuidelinesETSI TR 101 790 Satellite Network Modem System (SNMS) General Requirements(TIA/EIA-1073-000)DVB-RCS

37、ETSI EN 301 790 DVB-S2ETSI EN 302 307 SNMS Encryption Requirements(TIA/EIA-1073-002)IP Modem FCD(TIA/EIA-157)C2P Annex JUnder development in TIA 34.1.7SNMS Mesh Control Protocol SMCP20 1 Figure 1: SNMS Standard Document Tree 1 1.3 Document Organization 2 3 This document is organized into 9 sections.

38、 1.4 References 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 TIA-157: IP Modem Functional Capabilities Description, January 2005. 2 TIA-1073-000: Satellite Network Modem System (SNMS) General Requirements, July 2005. 3 ETSI EN 302 307, v1.1.1 (2004-06), DVB: Second

39、 generation framing structure, channel coding and modulation systems for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications. 4 ETSI EN 301 790 V1.4.1 (2005-09), DVB: Interaction channel for satellite distribution systems. 5 ETSI EN 300 421: DVB: Framing Str

40、ucture, Channel Coding, and Modulation for 11/12 GHz Satellite Services. 6 ETSI EN 301 192: Digital Video Broadcasting: DVB Specification for data broadcasting. 7 TIA-1008: IP over Satellite (IPoS), October 2003. 8 American National Standards Institute, “Telecommunications - Integrated Services Digi

41、tal Network (ISDN) - Multi-Level Precedence and Preemption (MLPP) Service Capability“, ANSI T1.619-1992 (R1999), 1992. 9 International Telecommunications Union, “Multilevel Precedence and Preemption Service (MLPP)“, ITU-T Recommendation I.255.3, 1990. 10 MIL-STD-188-165A: Interoperability and Perfor

42、mance Standards for SHF Satellite Communications PSK Modems (FDMA Operation), August 2001. 11 ITU-T G.7041/Y.1303: Generic framing procedure (GFP), Dec. 2003. 12 MSRC-5000SCA: Software Communications Architecture Specification, Ver. 2.2, Nov. 2001. 13 MSRC-5000API: Application Program Interface Supp

43、lement to the SCA Specification, Ver. 1.1, Nov. 2001. 14 MSRC-5000SEC: Security Supplement to the SCA Specification, Ver. 1.1, Nov. 2001. 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 15 Space Communications Protocol Standards (SCPS): Transport

44、Protocol, MIL-STD-2045-44000, CCSDS 714.0-B ISO 15893. 16 RFC 3246 - An Expedited Forwarding PHB (Per-Hop Behavior), B. Davie, et. al., Internet Engineering Task Force (IETF), March 2002. 17 RFC 2597 Assured Forwarding PHB Group, J. Heinanen, et. al., Internet Engineering Task Force (IETF), June 199

45、9. 18 ETSI TS 102 357 V0.2.7 (Feb., 2005): Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM) Common Air Interface Specification Satellite Independent Service Access Point (SI-SAP) 19 Interchangeable PEP (I-PEP) Transport Extensions And Session Framework For Satellite C

46、ommunications: Air Interface Specification, ESA/ESTEC, 20 April 2005. 20 Space Communications Protocol Specification Transport Protocol (SCPS-TP), Consultative Committee for Space Data Systems, CCSDS 714.0-B-1, Blue Book, May 1999. 21 Space Communications Protocol Specification (SCPS) Rationale, Req

47、uirements and Application Notes, Issue 1, CCSDS, Washington, D.C., May 1999. 22 TIA-1073-002: SNMS Encryption Requirements. 23 TIA-1088: SNMS Mesh Control Protocol (SMCP). 24 ITU-T M.3400 TMN Management Functions, February 2000. 25 ETSI TR 101 790 V1.2.1, Digital Video Broadcasting (DVB): Interactio

48、n Channel for Satellite Distribution Systems ; Guidelines for the use of EN 301 790, March 2005. 26 RFC 791 Internet Protocol, Internet Engineering Task Force (IETF), September 1981. 27 RFC 2460 Internet Protocol, Version 6 (IPv6) Specification, Internet Engineering Task Force (IETF), December 1998.

49、 28 RFC 3513 Internet Protocol Version 6 (IPv6) Addressing Architecture, Internet Engineering Task Force (IETF), April 2003. 29 RFC 3879 Deprecating Site Local Addresses, Internet Engineering Task Force (IETF), September 2004. 30 RFC 1918 Address Allocation for Private Internets, Internet Engineering Task Force (IETF), February 1996. 31 RFC 826 Ethernet Address Resolution Protocol (ARP), Internet Engineering Task Force (IETF), November 1982. 3 1 2 3 4 5 6 7 8 9 32 RFC 2461 Neighbor