TIA-1074-2006 OTA Support for MEID《MEID的OTA支持》.pdf

1、 TIA-1074 APPROVED: MARCH 1, 2006 REAFFIRMED: JUNE 21, 2012 TIA-1074 March 2006OTA Support for MEID NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability

2、and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling produc

3、ts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standar

4、ds Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicabl

5、e regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0207, formulated under the cognizance of the TIA TR-45 Mobile (b) the

6、re is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the

7、 use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement

8、 from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions,

9、 which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the

10、 Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), wheth

11、er such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference;

12、 (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identificatio

13、n to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents

14、of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECT

15、UAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR S

16、ERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR

17、 CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATIO

18、N OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-1074 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960i ContentsOTA SUPPORT FOR MEIDCO

19、NTENTSList of FiguresivList of Tables.vForewordviRevision History.viiIntroduction11 Scope.12 Normative References.13 Editorial Conventions1OTA Subscriber Feature Modifications.22 Subscriber Feature Description.22.1 Over-The-Air Service Provisioning (OTASP)22.1.1 Normal Procedures With Successful Out

20、come2MAP Part 000 Modifications.52 Part Structure.52.3 References.52.3.1 Normative References53 Definitions and Documentation Conventions.53.1 Definitions.54 Symbols and Abbreviations.6CDMA OTA Automatic Roaming Information Flow Modifications74.1.C1 Transport Encryption Parameters to Serving MSC for

21、 OTA.74.32.C1 Serving MSC Attachment to an OTAF94.32.C2 Exchange of OTASP Data Messages.114.32.C3 OTAF Request to Initiate MSC Procedures.124.CC.1 OTAF Request to Initiate AC Procedures148.CC.1a Serving MSC Attached to the Initial and Desired CSC.178.CC.1b Serving MSC Attached to the Initial and Des

22、ired CSC (ALT)198.CC.2a OTASP Call Redirected from Initial CSC to Desired CSC - Initial OTAF not Attached to Serving MSC218.CC.2b Serving MSC Redirected from Initial CSC to Desired CSC238.CC.2c OTASP Call Redirected from Initial CSC to Desired CSC - Initial OTAF Initially Attached to Serving MSC268.

23、CC.3 A-key Generation.28TIA-1074Contents123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960ii8.CC.4 SSD Update When SSD is Not Shared308.CC.5 Re-Authentication for Voice Privacy, Message Encryption or Both318.CC.7 AC Request to Commit A-Key

24、328.CC.8 AC Request to Release Resources.33TCAP Modifications.341 Application Services.341.3 TCAP Formats and Procedures341.3.2 Component Portion341.3.2.3 TCAP RETURN ERROR Component.342 Operation Definitions.382.2 AuthenticationDirective.382.6 AuthenticationStatusReport.392.7 BaseStationChallenge.4

25、02.20 FeatureRequest.412.42 OTASPRequest422.50 RegistrationNotification.432.61 SMSDeliveryPointToPoint.44MAP Parameter Signaling Protocol Modifications452.234 SMS_CauseCode45CDMA OTA Signaling Procedures Modifications.494.1 Authentication Directive494.1.3 VLR Receiving AuthenticationDirective INVOKE

26、494.6 Base Station Challenge.514.6.2 VLR Receiving BaseStationChallenge INVOKE.514.6.3 HLR Receiving BaseStationChallenge INVOKE.524.6.4 AC Receiving BaseStationChallenge INVOKE534.47 SMS Notification544.47.1 HLR Initiating SMSNotification INVOKE.545.C1 OTAF Attachment with Serving MSC.545.C1.1 MSC

27、Obtaining a TRN545.C1.3 MSC Receiving an SMDPP INVOKE to Attach with OTAF.555.C2 OTAF Attachment with Serving MSC (ALT).565.C2.2 OTAF Requesting TRN from an Alternate OTAF (ALT)565.C2.4 OTAF Initiating MSC Redirection of an OTASP Call (ALT)575.C3 Exchange of OTASP Data Message.605.C3.1 OTAF Initiati

28、ng SMDPP INVOKE for OTASP Data Message Exchange.605.C4 MSC PROCEDURE TRIGGERS FOR OTASP615.C4.1 OTAF Initiating SMDPP INVOKE for MS Registration615.C4.3 OTAF Initiating SMDPP INVOKE to Record New MSID625.C7 OTASP Request.635.C7.1 OTAF Initiating OTASPRequest INVOKE63TIA-1074 123456789101112131415161

29、718192021222324252627282930313233343536373839404142434445464748495051525354555657585960iii Contents5.C7.3 AC Receiving an OTASPREQ INVOKE64TIA-1074List of Figures123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960ivLIST OF FIGURESFigure 4.1

30、C1 Transport Encryption Parameters to the Serving MSC for OTA.7Figure 4.32.C1 Serving MSC Attachment to an OTAF9Figure 4.32.C2 Exchange of OTASP Data Messages.11Figure 4.32.C3 OTAF Request to Initiate MSC Procedures.12Figure 4.CC.1 OTAF Request to Initiate MSC Procedures.14Figure 8.CC.1a Serving MS

31、C Attached to the Initial and Desired CSC.17Figure 8.CC.1b Serving MSC Attached to the Initial and Desired CSC (ALT).19Figure 8.CC.2a OTASP Call Redirected from Initial CSC to Desired CSC - Initial OTAF not Attached to Serving MSC21Figure 8.CC.2b Serving MSC Redirected from Initial CSC to Desired CS

32、C.23Figure 8.CC.2c OTASP Call Redirected from Initial CSC to Desired CSC - Initial OTAF Initially Attached to Serving MSC26TIA-1074 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960v List of TablesLIST OF TABLESMAP Part 000 ModificationsT

33、able 2 Symbols and Abbreviations6TCAP ModificationsTable 4 Error Codes.37CDMA OTA Signaling Procedures ModificationsTable 2 VLR AuthenticationDirective Response.50Table 14 VLR BaseStationChallenge Response51Table 15 HLR BaseStationChallenge Response52Table 16 AC BaseStationChallenge Response53Table

34、5.C2.4 Originating MSC RedirectionDirective Response for OTASP.59Table 5.C7.3 AC OTASPRequest Response70TIA-1074Foreword123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960viFOREWORD(This foreword is not part of this Standard.)This document

35、presents a recommended plan for the implementation of Over-The-Air (OTA)support for the Mobile Equipment Identity (MEID).This document is organized into the following sections:Introduction. This section defines the scope of this document.OTA Subscriber Feature Modifications. This section specifies t

36、he OTA SubscriberFeature modifications needed to support the MEID.MAP Part 000 Modifications. This section specifies the MAP Part 000 modificationsneeded to support the MEID for OTA.CDMA OTA Automatic Roaming Information Flow Modifications. This sectionspecifies the CDMA OTA automatic roaming inform

37、ation flow modifications required forthe MEID.TCAP Modifications. This section defines a new MAP RETURN ERROR Error Codevalue for UnrecognizedMEID.MAP Operations Signaling Protocol Modifications. This section specifies the MAPoperations signaling protocol modifications needed to add the MEID paramet

38、er for OTA.MAP Parameters Signaling Protocol Modifications. This section specifies the MAPparameters signaling protocol modifications needed to support the MEID for OTA.CDMA OTA Signaling Procedures Modifications. This section specifies the CDMAOTA signaling procedures modifications for the MEID.TIA

39、1074 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960vii Revision HistoryREVISION HISTORYRevision Date Remarks0 October 2005 Initial PublicationTIA-1074Revision History12345678910111213141516171819202122232425262728293031323334353637383

40、9404142434445464748495051525354555657585960viiiThis page is intentionally left blank.TIA-1074 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859601ScopeIntroductionINTRODUCTIONThis Standard presents a recommended plan for the implementation

41、of Over-The-Air (OTA)support for the Mobile Equipment Identity (MEID).1ScopeThe purpose of this document is to specify the modifications to MAP and OTA for OTAsupport of the MEID.2 Normative ReferencesThe following specifications and standards contain provisions which, through reference in thistext,

42、 constitute provisions of this document. At the time of publication, the editions indicatedwere valid. All standards and specifications are subject to revision, and parties to agreementsbased on this document are encouraged to investigate the possibility of applying the most recenteditions of the st

43、andards indicated below. ANSI and TIA maintain registers of currently validnational standards published by them.Telecommunications Industry AssociationMAP TIA-41-E, Wireless Radiotelecommunications Intersystem Operations; 2004MEID TIA-928-B, MAP Support for the Mobile Equipment Identity (MEID); 2005

44、OTA TIA/EIA/IS-725-A, Cellular Radiotelecommunications Intersystem Operations Over-the-Air Service Provisioning (OTASP) and Parameter Administration(OTAPA); 19993 Editorial ConventionsThe following editorial conventions are used for this document: underline: additioncross out: deletion change bar: i

45、ndicates additions or deletions new sub-sections are identified in the sub-section headingTIA-1074OTA Subscriber Feature Modications1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859602 Subscriber Feature DescriptionOTA SUBSCRIBER FEATURE MO

46、DIFICATIONSThis section specifies the OTA Subscriber Feature modifications needed to support the MEID.2 Subscriber Feature Description2.1Over-The-Air Service Provisioning (OTASP)2.1.1 Normal Procedures With Successful OutcomeNormal Operation With Successful Outcome(See OTA MAIN, page 6)This section

47、describes a typical sequence of procedures for OTASP invoked from the MS,which results in a successful outcome. It is a service provider specific decision whether tocomplete the procedure in one or multiple steps.1. A user acquires an OTASP capable MS.2. The user must provide a charged battery or ex

48、ternal power source for the MS beforeproceeding with OTASP.3. The user is within the desired home system of the desired service provider service area,or obtains information on how to contact the service provider from outside the desiredservice provider service area.4. The user “powers-on” the MS.5.

49、The user selects which NAM to program (if multiple NAMs are supported).6. A service provider is selected. The following are some of the means by which a serviceprovider may be selected: The MS may be programmed to attempt OTASP with one or more serviceproviders. The MS may scan for all available service providers, and present the user with alist from which to choose. The user may explicitly specify a service provider by entering the OTASP featurecode and the appropriate supplementary digits. If the user is not within the desired system operators coverage area, the