1、 TIA-1099-B May 2010 Forward Link Only Air Interface Specification for Terrestrial Mobile Multimedia Multicast NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating intercha
2、ngeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or sel
3、ling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American Natio
4、nal Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or al
5、l applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0239-RV1-B-1, formulated under the cognizance o
6、f the TIA TR-47 Terrestrial Mobile Multimedia Multicast, TR-47.1 Subcommittee on Terrestrial Mobile Multimedia Multicast based on Forward Link Only Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. P
7、RICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. N
8、OTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Depart
9、ment or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Co
10、mmittee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending
11、 or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with t
12、he Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA o
13、pine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more
14、 Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional
15、elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see
16、 Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending
17、 patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLA
18、IMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPON
19、SIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO C
20、OMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS,
21、 LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENT
22、S HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Forward Link Only TIA-1099-B Air Interface Specification for TM3 CONTENTS i FOREWORD.xix 1 NORMATIVE REFERENCES.xxi 2 1 Overview 1-1 3 1.1 Scope of This Document. 1-1 4 1.2 Requirements Language . 1-2 5 1.3 Architec
23、tural Reference Model 1-2 6 1.4 Protocol Architecture 1-3 7 1.4.1 Layers 1-3 8 1.5 Physical Layer Channels 1-4 9 1.6 Protocols 1-5 10 1.6.1 Interfaces . 1-5 11 1.6.2 Protocol Overview . 1-6 12 1.7 Forward Link Only System Time. 1-7 13 1.8 Revision Number 1-8 14 1.9 Signaling Message Requirements 1-8
24、 15 1.10 Message Bit Order 1-9 16 1.11 Terms. 1-10 17 2 Control Layer . 2-1 18 2.1 Introduction. 2-1 19 2.2 Control Protocol . 2-2 20 2.2.1 Overview 2-2 21 2.2.2 Primitives and Public Data . 2-2 22 2.2.2.1 Commands . 2-2 23 2.2.2.1.1 Activate (device only). 2-2 24 2.2.2.1.2 Deactivate (device only).
25、 2-2 25 2.2.2.1.3 UpdateControlInfo (network only) 2-2 26 2.2.2.1.4 SendControlChannelMACPayload (network only) 2-3 27 2.2.2.2 Return Indications 2-3 28 2.2.2.2.1 UpdateComplete (network only). 2-3 29 2.2.2.2.2 ControlInfoUpdated (device only). 2-3 30 2.2.2.2.3 ControlChannelMACPayloadAvailable (net
26、work only) 2-3 31 TIA-1099-B Forward Link Only Air Interface Specification for TM3 CONTENTS ii 2.2.2.2.4 ControlSequenceNumberUpdated (device only) 2-3 1 2.2.2.3 Public Data. 2-3 2 2.2.3 Protocol Data Unit 2-4 3 2.2.4 Protocol Initialization 2-4 4 2.2.5 Procedures and Messages. 2-4 5 2.2.5.1 Procedu
27、res . 2-4 6 2.2.5.1.1 Data Encapsulation 2-4 7 2.2.5.1.2 Command Processing 2-5 8 2.2.5.1.2.1 Activate (device only). 2-5 9 2.2.5.1.2.2 Deactivate (device only) . 2-6 10 2.2.5.1.2.3 UpdateControlInfo. 2-6 11 2.2.5.1.2.4 SendControlChannelMACPayload 2-6 12 2.2.5.1.3 Inactive State 2-6 13 2.2.5.1.4 Ac
28、tive State. 2-6 14 2.2.5.1.4.1 Forward Link Only Network Requirements 2-6 15 2.2.5.1.4.2 Forward Link Only Device Requirements. 2-7 16 2.2.5.2 Header and Message Formats . 2-8 17 2.2.5.2.1 Control Protocol Packet Header. 2-8 18 2.2.5.2.2 Control Protocol Messages 2-10 19 2.2.5.2.2.1 Flow Description
29、 Message and Extended Flow Description Message 2-10 20 2.2.5.2.2.2 Extended Neighbor List Description Message 2-14 21 2.2.5.2.2.3 Forward Link Only Messaging Transport Fragment . 2-18 22 2.2.5.2.2.4 Filler Message . 2-18 23 2.2.5.2.3 PadByte 2-18 24 3 Stream Layer . 3-1 25 3.1 Introduction. 3-1 26 3
30、.1.1 General Overview . 3-1 27 3.2 Stream Protocol 3-1 28 3.2.1 Overview 3-1 29 3.2.2 Primitives and Public Data . 3-3 30 3.2.2.1 Commands . 3-3 31 Forward Link Only TIA-1099-B Air Interface Specification for TM3 CONTENTS iii 3.2.2.1.1 Activate command 3-3 1 3.2.2.1.2 Deactivate. 3-4 2 3.2.2.1.3 Rea
31、dyStreamPackets (network only) 3-4 3 3.2.2.1.4 SendPackets (network only) 3-4 4 3.2.2.1.5 ReceiveOctets (network only). 3-4 5 3.2.2.2 Return Indications 3-4 6 3.2.2.2.1 OctetsReceived 3-4 7 3.2.2.2.2 OctetsDropped 3-5 8 3.2.2.3 Public Data. 3-5 9 3.2.3 Protocol Data Unit 3-5 10 3.2.4 Procedures . 3-
32、5 11 3.2.4.1 Data Encapsulation 3-5 12 3.2.4.2 Packetization (network only) . 3-7 13 3.2.4.3 Arbitration (network only). 3-8 14 3.2.4.4 Forward Link Only Network Requirements 3-8 15 3.2.4.5 Forward Link Only Device Requirements 3-9 16 3.2.5 Trailer Formats. 3-9 17 3.2.5.1 Stream Layer Trailer. 3-9 1
33、8 3.2.5.2 Pad. 3-10 19 4 MAC LAYER. 4-1 20 4.1 Introduction. 4-1 21 4.1.1 Data Encapsulation 4-1 22 4.1.1.1 OIS Channel MAC Protocol Encapsulation 4-1 23 4.1.1.2 Data Channel MAC Protocol Encapsulation for MLCs Configured for Non-24 Layered Modes 4-2 25 4.1.1.3 Data Channel MAC Protocol Encapsulatio
34、n for Layered Modes . 4-2 26 4.1.1.4 Data Channel MAC Protocol Encapsulation for the Control Channel. 4-3 27 4.1.2 Time Reference. 4-4 28 4.2 OIS Channel MAC Protocol. 4-4 29 4.2.1 Overview 4-4 30 4.2.2 Primitives and Public Data . 4-5 31 4.2.2.1 Commands . 4-5 32 TIA-1099-B Forward Link Only Air In
35、terface Specification for TM3 CONTENTS iv 4.2.2.1.1 Activate . 4-5 1 4.2.2.1.2 Deactivate . 4-5 2 4.2.2.1.3 AllocateMLC 4-5 3 4.2.2.1.4 UpdateControlCapsuleID 4-5 4 4.2.2.1.5 UpdateControlSequenceNumbers 4-5 5 4.2.2.2 Return Indications 4-6 6 4.2.2.2.1 SupervisionFailed 4-6 7 4.2.2.2.2 LocalArea_Par
36、ametersRefreshed 4-6 8 4.2.2.2.3 WideArea_ParametersRefreshed 4-6 9 4.2.2.3 Public Data. 4-6 10 4.2.3 Protocol Data Unit 4-6 11 4.2.4 Procedure and Messages 4-6 12 4.2.4.1 Protocol Initialization 4-6 13 4.2.4.2 Command Processing . 4-6 14 4.2.4.2.1 Activate. 4-6 15 4.2.4.2.2 Deactivate. 4-6 16 4.2.4
37、.2.3 AllocateMLC 4-7 17 4.2.4.2.4 UpdateControlCapsuleID 4-7 18 4.2.4.2.5 UpdateControlSequenceNumbers 4-8 19 4.2.4.3 Inactive State 4-8 20 4.2.4.4 Active State 4-8 21 4.2.4.4.1 Forward Link Only Network Requirements 4-8 22 4.2.4.4.2 Forward Link Only Device Requirements. 4-8 23 4.2.5 Message Format
38、s 4-9 24 4.2.5.1 SystemParameters 4-9 25 4.2.5.1.1 SlotInfo Field Encoding. 4-21 26 4.3 Data Channel MAC Protocol . 4-23 27 4.3.1 Overview 4-23 28 4.3.2 Primitives and Public Data . 4-23 29 4.3.2.1 Commands . 4-23 30 4.3.2.1.1 Activate Command 4-23 31 Forward Link Only TIA-1099-B Air Interface Speci
39、fication for TM3 CONTENTS v 4.3.2.1.2 ToggleSystemParametersUpdateFlag Command. 4-23 1 4.3.2.2 Return Indications 4-24 2 4.3.2.2.1 SupervisionFailed (device only) . 4-24 3 4.3.2.2.2 MLC_LocationMissed (device only) 4-24 4 4.3.2.3 Public Data. 4-24 5 4.3.3 Protocol Data Unit 4-24 6 4.3.4 Procedures a
40、nd messages. 4-24 7 4.3.4.1 Protocol Initialization 4-24 8 4.3.4.2 Command Processing . 4-24 9 4.3.4.2.1 Activate. 4-24 10 4.3.4.2.2 Deactivate. 4-24 11 4.3.4.3 ToggleSystemParametersUpdateFlag . 4-24 12 4.3.4.4 Inactive State 4-25 13 4.3.4.5 Active State 4-25 14 4.3.4.5.1 Forward Link Only Network
41、Requirements 4-25 15 4.3.4.5.2 Forward Link Only Device Requirements. 4-27 16 4.3.4.5.2.1 Data Channel MAC Protocol Capsule Processing Procedure. 4-27 17 4.3.4.5.2.2 MLC Acquisition Procedure . 4-28 18 4.3.4.5.2.3 Last MAC Layer Packet Processing Procedure 4-29 19 4.3.5 Trailer Formats. 4-29 20 4.3.
42、5.1 Data Channel MAC Protocol Capsule Trailer. 4-29 21 4.3.5.2 StuffingPacket 4-33 22 4.4 Control Channel MAC Protocol. 4-33 23 4.4.1 Overview 4-33 24 4.4.2 Primitives and Public Data . 4-34 25 4.4.2.1 Commands . 4-34 26 4.4.2.1.1 Activate Command 4-34 27 4.4.2.1.2 Deactivate Command 4-34 28 4.4.2.2
43、 Return Indications 4-34 29 4.4.2.3 Public Data. 4-34 30 4.4.3 Protocol Data Unit 4-35 31 TIA-1099-B Forward Link Only Air Interface Specification for TM3 CONTENTS vi 4.4.4 Procedures . 4-35 1 4.4.4.1 Protocol Initialization 4-35 2 4.4.4.2 Command Processing . 4-35 3 4.4.4.2.1 Activate. 4-35 4 4.4.4
44、.2.2 Deactivate. 4-35 5 4.4.4.3 Inactive State 4-35 6 4.4.4.4 Active State 4-35 7 4.4.4.4.1 Forward Link Only Network Requirements 4-35 8 4.4.4.4.2 Forward Link Only Device Requirements. 4-36 9 4.4.4.4.2.1 Control Channel MAC Protocol Capsule Processing Procedure 4-36 10 4.4.4.4.2.2 Control Channel
45、Acquisition Procedure. 4-37 11 4.4.4.4.2.3 First MAC Layer Packet Processing Procedure. 4-37 12 4.4.5 Header Formats 4-38 13 4.4.5.1 Control Channel MAC Protocol Capsule Header 4-38 14 4.5 MAC Layer Interleaving and De-interleaving for MLCs Configured with PHY Type 1 15 Transmit Modes 4-38 16 4.5.1
46、MAC Layer Interleaving Procedure (network only) . 4-38 17 4.5.2 MAC Layer De-interleaving Procedure (device only). 4-39 18 4.6 Reed-Solomon Encoding Procedure for MLCs Configured with PHY Type 1 19 Transmit Modes 4-40 20 4.6.1 Introduction . 4-40 21 4.6.2 Generation of Reed-Solomon Error Control Blo
47、ck . 4-41 22 4.6.3 Reed-Solomon Code Generator . 4-42 23 4.6.3.1 (16, 16, 0) Reed-Solomon Code . 4-42 24 4.6.3.2 (16, 8, 8) Reed-Solomon Code . 4-42 25 4.6.3.3 (16, 12, 4) Reed-Solomon Code . 4-43 26 4.6.3.4 (16, 14, 2) Reed-Solomon Code . 4-44 27 4.7 Sequencing of Packets from RS Code Block to Phys
48、ical Layer for MLCs Configured 28 with PHY Type 1 Transmit Modes . 4-45 29 4.7.1 Sequencing of Packets from a Single Reed-Solomon Error Control Block 4-45 30 4.7.2 Sequencing of Packets from Multiple Reed-Solomon Error Control Blocks 4-46 31 4.8 MLC Multiplexing Function 4-47 32 Forward Link Only TI
49、A-1099-B Air Interface Specification for TM3 CONTENTS vii 4.8.1 Introduction . 4-47 1 4.8.2 Requirements. 4-48 2 5 PHYSICAL LAYER 5-1 3 5.1 Physical Layer Packets . 5-1 4 5.1.1 Overview 5-1 5 5.1.2 Physical Layer Packet Format. 5-1 6 5.1.3 Bit Transmission Order 5-2 7 5.1.4 Computation of the FCS Bits 5-2 8 5.2 Forward Link Only Transmitter Requirements 5-3 9 5.2.1 Frequency Parameters 5-3 10 5.2.1.1 Transmit Bandwidth and Frequency. 5-3 11 5.2.1.2 Frequency Tolerance. 5-3 12 5.2.1.3 Power Output Characteristics. 5-3 13 5.2.2 OFDM Modulation Characteristics 5-3 14 5.2.2.1 Overview. 5-3
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1