TIA-1119-2007 Signaling Conformance Test Specification for HRPD Supplemental Services《HRPD补充服务的信令一致性试验规范》.pdf

1、 TIA STANDARD Signaling Conformance Test Specification for HRPD Supplemental Services TIA-1119 September 2007 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA Engineering Standards and Publications

2、are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. T

3、he existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by N

4、on-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever t

5、o parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine

6、 the applicability of regulatory limitations before its use. (From Project No. 3-0269, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may

7、 be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or

8、 investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to inv

9、estigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-disc

10、riminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) eng

11、aged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims

12、any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent

13、applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of t

14、he Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF T

15、HE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES

16、REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR IND

17、IRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREA

18、CH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TI

19、A-1119 iContents 1 FOREWORD .iii 2 REFERENCES iv 3 1 OverView 1-1 4 1.1 Scope 1-1 5 1.2 Terms and Definitions . 1-1 6 2 Enhanced Multi-Flow Packet Application Tests. 2-3 7 2.1 Route Selection Protocol Tests . 2-3 8 2.1.1 Access Network Tests . 2-3 9 2.1.2 Access Terminal Tests 2-5 10 2.2 Radio Link

20、Protocol Tests .2-12 11 2.2.1 Access Network Tests 2-12 12 2.2.2 Access Terminal Tests .2-21 13 2.3 Data Over Signaling Protocol Tests .2-30 14 2.3.1 Access Network Tests 2-30 15 2.3.2 Access Terminal Tests .2-33 16 2.4 Flow Control Protocol Tests 2-37 17 2.4.1 Access Network Tests 2-37 18 2.4.2 Acc

21、ess Terminal Tests .2-38 19 2.5 Location Update Protocol Tests.2-39 20 2.5.1 Access Network Tests 2-39 21 2.5.2 Access Terminal Tests .2-39 22 3 MULTI-Link Multi-Flow Packet Application Tests 3-1 23 3.1 Route Selection Protocol Tests . 3-1 24 3.1.1 Access Network Tests . 3-1 25 3.1.2 Access Terminal

22、 Tests 3-3 26 3.2 Segmentation and Reassembly Protocol Tests.3-10 27 3.2.1 Access Network Tests 3-10 28 3.2.2 Access Terminal Tests .3-23 29 3.3 Data Over Signaling Protocol Tests .3-36 30 3.3.1 Access Network Tests 3-36 31 3.3.2 Access Terminal Tests .3-39 32 3.4 Location Update Protocol Tests.3-42

23、 33 3.4.1 Access Network Tests 3-42 34 3.4.2 Access Terminal Tests .3-43 35 3.5 Flow Control Protocol Tests 3-45 36 3.5.1 Access Network Tests 3-45 37 3.5.2 Access Terminal Tests .3-46 38 39 TIA-1119 ii 1 TIA-1119 iii1 FOREWORD This document specifies the signaling conformance tests for the cdma2000

24、1High Rate 2 Packet Data supplemental services. 3 The document is organized into the following sections: 4 Chapter 2 provides the tests for Enhanced Multi-Flow Packet Application. 5 Chapter 3 provides the signaling tests for Multi-Link Multi-Flow Packet Application. 6 1“cdma2000is the trademark for

25、the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States.” TIA-1119 iv REFERE

26、NCES The following standards contain provisions which, through reference in this text, constitute 1 provisions of this Standard. At the time of publication, the editions indicated were valid. All 2 standards are subject to revision, and parties to agreements based upon this Standard are 3 encouraged

27、 to investigate the possibility of applying the most recent editions of the 4 standards indicated below. 5 Standards: 6 1 TIA-856-A, cdma2000 High Rate Packet Data Air Interface Specification. 7 2 TIA-1036, Interoperability Specification for cdma2000 Air Interface. 8 3 TIA-1006, cdma2000 High Rate B

28、roadcast-Multicast Packet Data Air Interface 9 Specification. 10 4 TIA-890-A. Test Application Specification (TAS) for High Rate Packet Data Air Interface 11 5 TSB-58-G, Administration of Parameter Value Assignments for cdma2000 Spread 12 Spectrum Standards, Release E. (INFORMATIVE). 13 6 TIA-1054-A

29、, cdma2000 High Rate Packet Data Supplemental Services. 14 TIA-1119 1-11 OVERVIEW 1.1 Scope 1 These technical requirements form a signaling conformance standard for supplemental 2 services on cdma2000 high rate packet data systems. These requirements ensure that a 3 compliant access terminal can obt

30、ain service through any access network conforming to 4 6. These requirements do not address the quality or reliability of that service, nor do they 5 cover equipment performance or measurement procedures. 6 This specification is primarily oriented toward requirements necessary for the signaling 7 co

31、nformance of access terminals and to a limited extent to that of access network. 8 1.2 Terms and Definitions 9 Access Network (AN). The network equipment providing data connectivity between a 10 packet switched data network (typically the Internet) and the access terminals. An access 11 network is e

32、quivalent to a base station in 9. 12 Access Terminal (AT). A device providing data connectivity to a user. An access terminal 13 may be connected to a computing device such as a laptop personal computer or it may be a 14 self-contained data device such as a personal digital assistant. An access term

33、inal is 15 equivalent to a mobile station in 9. 16 Channel. The set of channels transmitted between the access network and the access 17 terminals within a given frequency assignment. A Channel consists of a Forward Link and a 18 Reverse Link. 19 Forward Channel. The portion of the Channel consistin

34、g of those Physical Layer Channels 20 transmitted from the access network to the access terminal. 21 Forward Control Channel. The channel that carries data to be received by all access 22 terminals monitoring the Forward Channel. 23 Forward Traffic Channel. The portion of the Forward Channel that ca

35、rries information for 24 a specific access terminal. The Forward Traffic Channel can be used as either a Dedicated 25 Resource or a non-Dedicated Resource. Prior to successful access terminal authentication, 26 the Forward Traffic Channel serves as a non-Dedicated Resource. Only after successful 27

36、access terminal authentication can the Forward Traffic Channel be used as a Dedicated 28 Resource for the specific access terminal. 29 NULL. A value which is not in the specified range of the field. 30 QN. QuickNak Protocol provides over the air loss detection for a SAR layer data stream. 31 Reserva

37、tion. Air interface resources set up by the access network to carry a higher layer 32 flow. A Reservation is identified by its ReservationLabel. ReservationLabels are bound to 33 Link Flows that carry higher layer flows. A Reservation can be either in the Open or Close 34 state. 35 Reverse Access Ch

38、annel. The portion of the Reverse Channel that is used by access 36 terminals to communicate with the access network when they do not have a traffic channel 37 assigned. There is a separate Reverse Access Channel for each sector of the access network. 38 Reverse Channel. The portion of the Channel c

39、onsisting of those Physical Layer Channels 39 transmitted from the access terminal to the access network. 40 Reverse Traffic Channel. The portion of the Reverse Channel that carries information from 41 a specific access terminal to the access network. The Reverse Traffic Channel can be used 42 TIA-1

40、119 1-2 as either a Dedicated Resource or a non-Dedicated Resource. Prior to successful access 1 terminal authentication, the Reverse Traffic Channel serves as a non-Dedicated Resource. 2 Only after successful access terminal authentication can the Reverse Traffic Channel be 3 used as a Dedicated Re

41、source for the specific access terminal. 4 RLP. Radio Link Protocol provides reliable delivery if needed, in-order delivery if needed, 5 and duplicate detection for a higher layer data stream. 6 SAR. Segmentation and Reassembly protocol provides reliable delivery if needed, in-order 7 delivery if ne

42、eded, and duplicate detection for a higher layer data stream. 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 TIA-1119 2-32 ENHANCED MULTI-FLOW PACKET APPLICATION TESTS This section includes the tests for EMPA. 1 2.1 Route Selection Protocol Tests 2 Tests in this

43、 sub-section require access to any machine from which a ping packet can be 3 transmitted to the access terminal and a response can be received. “Cause” in the test 4 procedure refers to creating underlying conditions at the access network or access terminal 5 that result in transmission of certain m

44、essages or change of protocol states leading to such 6 transmission. As an example, changes at the physical layer could cause the access network 7 to transmit an ActivateRoute message. The conditions that lead to such message 8 transmissions are not specified in the standard 6 and are implementation

45、 dependent. The 9 ReservationLabelKK used in the test procedure refers to the value of the Higher layer 10 Protocol identifier 5 for the Flow Protocol being used to transmit ping packets. Link Flow 11 NN to which reservation label KK is mapped can be found from the FlowNNReservationFwd 12 or FlowNNR

46、eservationRev attribute. The use of route A or route B can be verified from the 13 route bit in the headers of the received RLP packets. If the bit was set to 0, then route A 14 was used, otherwise route B was used. 15 2.1.1 Access Network Tests 16 2.1.1.1 RLP Initialization Test 17 2.1.1.1.1 Defini

47、tion This test verifies that the access network initializes the RLP for a route after transmitting 18 an ActivateRoute request for the route. This test is only applicable if TwoRoutesSupported 19 attribute is set to 0x01. 20 2.1.1.1.2 Traceability See section 2.4.4.1.3 of 6 for details. 21 2.1.1.1.3

48、 Test Procedure a. Power up the access terminal. If the access terminal has an open session, instruct 22 the access terminal to close the session by transmitting a SessionClose message to 23 the access network. 24 b. Instruct the access terminal to set up a new session with the access network and to

49、 25 negotiate the use of the Enhanced Multi-Flow Packet Application bound to the 26 service access network (app type = 0x0009). 27 c. After the session configuration is over, instruct the access network to transmit a 28 ping packet. 29 d. Verify that the access network meets the minimum standard as per bullet 1 of 30 2.1.1.1.4. 31 TIA-1119 2-4 e. Cause the access network to transmit an ActivateRoute message requesting 1 activation of route B. 2 f. If in response to the ActivateRoute message transmitted in the last step an 3 ActivateRouteAck message is rece