TIA-1121 002-1-2009 MAC Layer for Ultra Mobile Broadband (UMB) Air Interface Specification (Incorporates Addendum 1).pdf

1、 TIA-1121.002-1-2009 APPROVED: MAY 1, 2009 REAFFIRMED: DECEMBER 2, 2013 TIA-1121.002-1 May 2009MAC Layer for Ultra Mobile Broadband (UMB) Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings betw

2、een manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude an

3、y member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications a

4、re adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to ad

5、dress all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks i

6、n this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. PN-3-0272.002-AD1-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be

7、approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”),

8、 including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in

9、 accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involv

10、ed, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document co

11、ntains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alte

12、rnate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of volunta

13、ry disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or

14、 published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR I

15、MPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS

16、ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCE

17、D OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR

18、 LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE

19、USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-002-0 v3.0 CONTENTS i FOREWORD.xxv 1 NOTES .xxvii 2 REFERENCES1-1 3 1 GENERAL1-1 4 1.1 Overview1-1 5 1.2 Common Definitions1-1 6 1.2.1 Power Density1-1 7 1.3 Data Encapsulation.1-2 8

20、1.4 Superframe Structure for the Basic Physical Layer1-2 9 1.5 HARQ Interlacing Structures for the Basic Physical Layer .1-3 10 1.5.1 FL interlacing structures .1-4 11 1.5.1.1 Eight interlace structure without extended transmissions1-4 12 1.5.1.2 Six interlace structure without extended transmission

21、s.1-4 13 1.5.1.3 Eight interlace structure with extended transmissions.1-5 14 1.5.1.4 Eight interlace structure with two frame transmission.1-6 15 1.5.1.5 Six interlace structure with two frame transmission 1-7 16 1.5.2 RL interlacing structures .1-8 17 1.5.2.1 Eight interlace structure without exte

22、nded transmissions1-8 18 1.5.2.2 Eight interlace structure with extended transmissions.1-9 19 2 Basic Packet Consolidation Protocol2-1 20 2.1 Introduction 2-1 21 2.1.1 General Overview.2-1 22 2.2 Primitives and Public Data 2-1 23 2.2.1 Commands 2-1 24 2.2.2 Return Indications.2-1 25 2.2.3 Local Comm

23、on Data 2-1 26 2.2.4 Public Data2-1 27 2.2.5 Data Encapsulation for the InUse Instance of the Protocol.2-1 28 2.3 Procedures and Messages for the InConfiguration Instance of the Protocol2-2 29 2.3.1 Protocol Initialization.2-2 30 2.3.2 Procedures 2-2 31 3GPP2 C.S0084-002-0 v3.0 CONTENTS ii 2.3.3 Mes

24、sage Formats 2-2 1 2.4 Procedures and Messages for the InUse Instance of the Protocol .2-2 2 2.4.1 Initialization and Commit Procedures2-2 3 2.4.1.1 Protocol Initialization for the InUse Protocol Instance 2-2 4 2.4.1.2 Hard Commit Procedures 2-2 5 2.4.1.3 Soft Commit Procedures 2-3 6 2.4.2 Other Pro

25、cedures 2-3 7 2.4.2.1 Destination Channels 2-3 8 2.4.2.2 Priority Order 2-3 9 2.4.2.3 Transmission Deadline 2-3 10 2.4.2.4 Transmit Procedures .2-3 11 2.4.2.5 Receive Procedures2-3 12 2.4.2.6 Token Bucket Management .2-4 13 2.4.2.6.1 StreamNNSchedulerHintBucketInUse2-4 14 2.4.2.6.2 StreamNNMaxBucket

26、InUse2-4 15 2.4.2.7 Forward Link Packet Treatment.2-4 16 2.4.2.8 Reverse Link Scheduling2-4 17 2.4.2.9 Policing and Shaping .2-5 18 2.4.3 Message Formats 2-5 19 2.4.4 Consolidated Packet Format2-5 20 2.4.5 Interface to Other Protocols.2-6 21 2.4.5.1 Commands2-6 22 2.4.5.2 Indications 2-6 23 2.5 Prot

27、ocol Numeric Constants2-6 24 2.6 Configuration Attributes .2-7 25 2.6.1 Simple Attributes 2-7 26 2.6.2 Complex Attributes .2-8 27 2.6.2.1 StreamNNSchedulerHintBucket.2-8 28 2.6.2.2 StreamNNMaxBucket 2-8 29 2.7 Session State Information .2-9 30 3 Basic Superframe Preamble MAC Protocol 3-1 31 3.1 Over

28、view .3-1 32 3GPP2 C.S0084-002-0 v3.0 CONTENTS iii 3.2 Primitives 3-2 1 3.2.1 Commands 3-2 2 3.2.2 Return Indications.3-2 3 3.2.3 Local Common Data 3-2 4 3.2.4 Public Data3-2 5 3.3 Protocol Data Unit.3-2 6 3.4 Procedures and Messages for the InConfiguration Instance of the Protocol3-2 7 3.4.1 Protoc

29、ol Initialization.3-2 8 3.4.2 Procedures 3-2 9 3.4.3 Message Formats.3-3 10 3.5 Procedures for the InUse Instance .3-3 11 3.5.1 Initialization and Commit Procedures 3-3 12 3.5.1.1 Protocol Initialization for the InUse Protocol Instance.3-3 13 3.5.1.2 Hard Commit Procedures.3-3 14 3.5.1.3 Soft Commit

30、 Procedures 3-3 15 3.5.2 Command Processing 3-3 16 3.5.2.1 Activate3-3 17 3.5.2.2 Deactivate3-3 18 3.5.3 Inactive State.3-3 19 3.5.4 Active State .3-4 20 3.5.5 Procedures for Transmission and Reception of the AcqInfo block.3-4 21 3.5.6 Procedures for Transmission and Reception of the F-PBCCH Physica

31、l 22 Layer Channel 3-4 23 3.5.7 Procedures for Transmission and Reception of the F-SBCCH Physical 24 Layer Channel 3-4 25 3.5.8 Procedures for Transmission and Reception of the F-QPCH Physical Layer 26 Channel3-5 27 3.5.8.1 Procedure for Reception of the QuickPageBlock .3-5 28 3.5.8.1.1 QuickPageFor

32、mat = 000 .3-6 29 3.5.8.1.2 QuickPageFormat = 001 .3-6 30 3.5.8.1.3 QuickPageFormat = 010 .3-7 31 3.5.8.1.4 QuickPageFormat = 011 .3-7 32 3.5.8.1.5 QuickPageFormat = 100 or QuickPageFormat = 1013-8 33 3GPP2 C.S0084-002-0 v3.0 CONTENTS iv 3.5.8.1.6 QuickPageFormat = 110 .3-8 1 3.5.8.1.7 QuickPageForm

33、at = 111 .3-9 2 3.5.9 Procedures for Transmission and Reception of the F-OSICH Physical Layer 3 Channel3-9 4 3.6 Header and Trailer Formats 3-10 5 3.7 Interface to Other Protocols.3-10 6 3.7.1 Commands3-10 7 3.7.2 Indications 3-10 8 3.8 Configuration Attributes .3-10 9 3.8.1 Simple Attributes 3-10 1

34、0 3.9 Protocol Numeric Constants3-11 11 4 Basic Access Channel MAC Protocol .4-1 12 4.1 Overview .4-1 13 4.2 Primitives4-2 14 4.2.1 Commands4-2 15 4.2.2 Return Indications 4-3 16 4.2.3 Local Common Data4-3 17 4.2.4 Public Data .4-3 18 4.3 Protocol Data Unit.4-3 19 4.4 Procedures and Messages for the

35、 InConfiguration Instance of the Protocol4-3 20 4.4.1 Protocol Initialization.4-3 21 4.4.2 Procedures 4-3 22 4.4.3 Message Formats 4-3 23 4.5 Procedures for the InUse Instance.4-4 24 4.5.1 Initialization and Commit Procedures4-4 25 4.5.1.1 Protocol Initialization for the InUse Protocol Instance 4-4

36、26 4.5.1.2 Hard Commit Procedures 4-4 27 4.5.1.3 Soft Commit Procedures 4-4 28 4.5.2 Command Processing4-4 29 4.5.2.1 Activate .4-4 30 4.5.2.2 Deactivate .4-4 31 4.5.2.3 Abort .4-5 32 3GPP2 C.S0084-002-0 v3.0 CONTENTS v 4.5.2.4 AttemptAccess .4-5 1 4.5.3 Access Channel Structure .4-5 2 4.5.4 Inactiv

37、e State.4-6 3 4.5.5 Active State .4-6 4 4.5.5.1 Access Terminal Requirements 4-6 5 4.5.5.1.1 Procedure for Processing the AttemptAccess Command .4-6 6 4.5.5.1.2 Procedure for Ending Probe Transmissions 4-8 7 4.5.5.1.3 Procedure for Determining Probe Sequence Backoff Time.4-9 8 4.5.5.1.4 Procedure fo

38、r Determining WalshSequenceID and 9 AccessScramblingID4-9 10 4.5.5.1.4.1 Procedure for Determining PilotLevel4-10 11 4.5.5.1.4.2 Determining WalshSequenceID and AccessScramblingID when 12 AccessType=0 (Initial Access)4-11 13 4.5.5.1.4.3 Determining WalshSequenceID and AccessScramblingID when 14 Acce

39、ssType=1 (Special Access)4-11 15 4.5.5.1.5 Procedure for Determining InitialAccessPowerDensity4-11 16 4.5.5.2 Access Network Requirements .4-12 17 4.6 Header Formats.4-12 18 4.7 Message Formats.4-12 19 4.7.1 AccessProbeNumberRequest4-12 20 4.7.2 AccessProbeNumberResponse .4-13 21 4.8 Interface to Ot

40、her Protocols .4-14 22 4.8.1 Commands 4-14 23 4.8.2 Indications 4-14 24 4.9 Configuration Attributes4-14 25 4.9.1 Simple Attributes.4-14 26 4.10 Protocol Numeric Constants 4-17 27 4.11 Session State Information4-17 28 5 Basic Forward Link Control Segment MAC Protocol.5-1 29 5.1 Overview5-1 30 5.2 Pr

41、imitives 5-3 31 5.2.1 Commands 5-3 32 5.2.2 Return Indications.5-3 33 3GPP2 C.S0084-002-0 v3.0 CONTENTS vi 5.2.3 Local Common Data5-3 1 5.2.4 Public Data .5-3 2 5.3 Protocol Data Unit.5-3 3 5.4 Procedures and Messages for the InConfiguration Instance of the Protocol5-4 4 5.4.1 Protocol Initializatio

42、n.5-4 5 5.4.2 Procedures 5-4 6 5.4.3 Message Formats 5-4 7 5.5 Procedures for the InUse Instance.5-4 8 5.5.1 Initialization and Commit Procedures5-4 9 5.5.1.1 Protocol Initialization for the InUse Protocol Instance 5-4 10 5.5.1.2 Hard Commit Procedures 5-4 11 5.5.1.3 Soft Commit Procedures 5-4 12 5.

43、5.2 Command Processing5-4 13 5.5.2.1 Activate .5-4 14 5.5.2.2 Deactivate .5-5 15 5.5.3 Inactive State 5-5 16 5.5.4 Active State .5-5 17 5.5.4.1 Access Network Requirements.5-5 18 5.5.4.1.1 Procedures for the F-SCCH5-5 19 5.5.4.1.1.1 Blocks of the F-SCCH 5-5 20 5.5.4.1.1.2 Framing of F-SCCH Blocks 5-

44、11 21 5.5.4.1.1.3 Rules for the F-SCCH Blocks .5-13 22 5.5.4.1.1.3.1 AccessGrant.5-13 23 5.5.4.1.1.3.1.1 Procedures for Sending an Access Grant 5-13 24 5.5.4.1.1.3.2 Forward Link Assignment Blocks .5-14 25 5.5.4.1.1.3.2.1 Subzone Forward Link Assignment Blocks .5-14 26 5.5.4.1.1.3.2.2 Residual Resou

45、rce Assignment FLABs5-15 27 5.5.4.1.1.3.2.3 Multiple Codeword MIMO Forward Link Assignment 28 Block part 1 .5-15 29 5.5.4.1.1.3.2.4 Multiple Codeword MIMO Forward Link Assignment 30 Block part 2 .5-16 31 5.5.4.1.1.3.2.5 Single Code Word MIMO Forward Link Assignment 32 Blocks 5-16 33 3GPP2 C.S0084-00

46、2-0 v3.0 CONTENTS vii 5.5.4.1.1.3.3 RLAB5-17 1 5.5.4.1.1.3.4 PDCAB .5-18 2 5.5.4.1.1.3.5 GRA bitmap5-18 3 5.5.4.1.1.3.6 Indexing F-SCCH Blocks 5-18 4 5.5.4.1.2 Procedures for F-PCCH 5-19 5 5.5.4.1.3 Procedures for F-PQICH.5-19 6 5.5.4.1.4 Procedures for F-FOSICH.5-20 7 5.5.4.1.5 Procedures for F-IOT

47、CH .5-21 8 5.5.4.1.6 Procedures for F-RABCH5-22 9 5.5.4.1.7 Procedures for F-ACKCH5-22 10 5.5.4.1.8 Procedures for F-SPCH.5-25 11 5.5.4.2 Access Terminal Requirements 5-26 12 5.5.4.2.1 Access Terminal Requirements In Case Of Outstanding Access 13 Probe 5-26 14 5.5.4.2.1.1 RPICHScramblingSeed .5-29 1

48、5 5.5.4.2.2 Access Terminal Requirements In Case Of No Outstanding Access 16 Probe 5-30 17 5.5.4.3 General Procedures5-33 18 5.5.4.3.1 Procedures for Half-Duplex Mode.5-33 19 5.5.4.3.1.1 Access Network Procedures5-33 20 5.5.4.3.1.2 Access Terminal Procedures.5-33 21 5.5.4.3.2 Procedures for Selected

49、Interlace Operation 5-33 22 5.5.4.3.2.1 Access Network Procedures5-33 23 5.5.4.3.2.2 Access Terminal Procedures:5-34 24 5.5.4.3.3 Procedures for Semi-Connected State 5-34 25 5.5.4.3.4 Procedures for TuneAway Operation 5-34 26 5.6 Message Formats for the InUse Instance .5-34 27 5.6.1 TimingCorrection.5-34 28 5.7 Header and Trailer Formats.5-35 29 5.8 Interface to Other Protocols .5-35 30 5.8.1 Commands 5-35 31 5.8.2 Indications 5-35 32 3GPP2 C.S0084-002-0 v3.0 CONTENTS viii 5.9 Configuration Attributes .5-35 1 5.9.1 Simple Attributes 5-35 2 5.10 Protocol Numeric Constants5-3