1、 TIA-1121.003-1-2009 APPROVED: MAY 1, 2009 REAFFIRMED: DECEMBER 2, 2013 TIA-1121.003-1 May 2009Radio Link Layer for Ultra Mobile Broadband (UMB) Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandin
2、gs between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect prec
3、lude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publica
4、tions are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purpor
5、t to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trade
6、marks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. PN-3-0272.003-AD1-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document w
7、ill be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (
8、“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested,
9、 all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties
10、 involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Docu
11、ment contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandator
12、y, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of
13、voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Paten
14、t(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRE
15、SS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DIS
16、CLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR
17、PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMA
18、GES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT
19、OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-003-0 v3.0 CONTENTS i FOREWORD. xiii 1 REFERENCES. xv 2 1 Introduction1-1 3 1.1 General Overview 1-1 4 2 BASIC QOS MANAGEMENT PROTOCOL .2-1 5 2.1 Introduction 2-1 6 2.1.1 Gener
20、al Overview.2-1 7 2.1.2 Primitives and Public Data.2-1 8 2.1.2.1 Commands 2-1 9 2.1.2.2 Return Indications.2-1 10 2.1.2.3 Local Common Data.2-1 11 2.1.2.4 Public Data2-1 12 2.1.3 Data Encapsulation for the InUse Instance of the Protocol.2-1 13 2.2 Procedures and Messages for the InConfiguration Inst
21、ance of the Protocol2-1 14 2.2.1 Protocol Initialization for the InConfiguration Protocol Instance.2-1 15 2.2.2 Procedures 2-1 16 2.2.3 Message Formats.2-2 17 2.3 Procedures and Messages for the InUse Instance of the Protocol .2-2 18 2.3.1 Definitions.2-2 19 2.3.2 Procedures 2-3 20 2.3.2.1 Protocol
22、Initialization for the InUse Protocol Instance.2-3 21 2.3.2.2 Hard Commit Procedures.2-3 22 2.3.2.3 Soft Commit Procedures 2-3 23 2.3.2.4 Reservation Procedures2-3 24 2.3.2.4.1 Reservation State Maintenance 2-3 25 2.3.2.4.1.1 State-independent Requirements .2-6 26 2.3.2.4.1.1.1 Packet Filter Process
23、ing Requirements .2-6 27 2.3.2.4.1.1.2 Access Terminal Requirements.2-7 28 2.3.2.4.1.1.3 Access Network Requirements2-8 29 2.3.2.4.2 Close State.2-9 30 2.3.2.4.2.1 Access Terminal Requirements.2-9 31 3GPP2 C.S0084-003-0 v3.0 CONTENTS ii 2.3.2.4.2.2 Access Network Requirements .2-9 1 2.3.2.4.3 Open S
24、tate.2-10 2 2.3.2.4.3.1 Access Terminal Requirements 2-10 3 2.3.2.4.3.2 Access Network Requirements .2-10 4 2.3.3 Message Formats 2-11 5 2.3.3.1 ReservationOnRequest 2-11 6 2.3.3.2 ReservationOffRequest.2-12 7 2.3.3.3 ReservationOnAccept.2-14 8 2.3.3.4 ReservationOffAccept.2-15 9 2.3.3.5 Reservation
25、Reject 2-15 10 2.3.3.6 RevReservationOn .2-16 11 2.3.3.7 RevReservationOff .2-17 12 2.3.3.8 FwdReservationOff.2-18 13 2.3.3.9 FwdReservationOn 2-19 14 2.3.3.10 XonRequest .2-20 15 2.3.3.11 XoffRequest .2-20 16 2.3.4 Interface to Other Protocols.2-21 17 2.3.4.1 Commands2-21 18 2.3.4.2 Indications 2-2
26、1 19 2.4 Protocol Numeric Constants2-21 20 2.5 Configuration Attributes for the Basic QoS Management Protocol .2-22 21 2.5.1 Simple Attributes 2-22 22 2.5.2 Complex Attributes .2-27 23 2.5.2.1 ANSupportedQoSProfiles Attribute 2-27 24 2.5.2.1.1 ProfileValue definition2-28 25 2.5.2.1.1.1 Definition of
27、 ProfileValue field when ProfileType is 0x00.2-28 26 2.5.2.1.1.2 Definition of ProfileValue field when ProfileType is 0x01 or 0x022-29 27 2.5.2.1.1.2.1 Definition of QoS_ATTRIBUTE_SET field.2-30 28 2.5.2.1.1.3 Definition of ProfileValue field when ProfileType is 0x03.2-33 29 2.5.2.1.1.4 Definition o
28、f ProfileValue field when ProfileType is 0x04.2-33 30 2.5.2.2 ATSupportedQoSProfiles Attribute.2-33 31 2.5.2.3 ReservationKKQoSRequestFwd Attribute.2-34 32 3GPP2 C.S0084-003-0 v3.0 CONTENTS iii 2.5.2.4 ReservationKKQoSRequestRev Attribute 2-34 1 2.5.2.5 MaxReservationsAndPacketFilters Attribute.2-35
29、 2 2.5.2.6 ReservationKKPacketFiltersFwd Attribute 2-36 3 2.5.2.6.1 Definition of PacketFilter Record 2-38 4 2.5.2.7 ReservationKKPacketFiltersRev Attribute.2-42 5 2.5.2.8 ATIPAddress Attribute2-43 6 2.5.2.8.1 SimpleIPv4AddressRecord definition 2-44 7 2.5.2.8.2 MobileIPv4AddressRecord definition.2-4
30、4 8 2.5.2.8.3 IPv6AddressRecord definition.2-45 9 2.6 Non-Attribute Data2-45 10 2.7 Session State Information2-45 11 3 BASIC RADIO LINK PROTOCOL 3-1 12 3.1 Introduction 3-1 13 3.1.1 General Overview.3-1 14 3.1.2 Local Common Data 3-2 15 3.1.3 Public Data3-2 16 3.1.4 Data Encapsulation for the InUse
31、Instance of the Protocol.3-2 17 3.2 Procedures and Messages for the InConfiguration Instance of the Protocol3-3 18 3.2.1 Protocol Initialization for the InConfiguration Protocol Instance.3-3 19 3.2.2 Procedures 3-3 20 3.2.3 Message Formats.3-3 21 3.3 Common Procedures and Messages for the InUse Inst
32、ance of the Protocol 3-4 22 3.3.1 Protocol Initialization for the InUse Protocol Instance 3-4 23 3.3.2 Hard Commit Procedures.3-5 24 3.3.3 Soft Commit Procedures 3-5 25 3.3.4 Procedures 3-5 26 3.3.4.1 RouteCounter Procedures 3-5 27 3.3.4.2 RLP Transmit Procedures.3-5 28 3.3.4.3 RLP Receive Procedure
33、s .3-6 29 3.3.4.4 Authentication Procedures.3-7 30 3.3.4.4.1 Transmit Procedures3-7 31 3.3.4.4.2 Receive Procedures 3-8 32 3GPP2 C.S0084-003-0 v3.0 CONTENTS iv 3.3.4.5 RLP Packet Header 3-8 1 3.4 Segmentation and Reassembly Sub-Protocol.3-10 2 3.4.1 Overview .3-10 3 3.4.2 Primitives and Public Data
34、3-10 4 3.4.2.1 Commands3-10 5 3.4.2.2 Return Indications.3-10 6 3.4.3 Procedures and Messages for the InUse Instance of the Sub-Protocol3-11 7 3.4.3.1 Procedures 3-11 8 3.4.3.1.1 Initialization and Reset 3-13 9 3.4.3.1.1.1 Initialization Procedure 3-13 10 3.4.3.1.1.1.1 Initialization Procedure for t
35、he SAR Transmitter.3-13 11 3.4.3.1.1.1.2 Initialization Procedure for the SAR Receiver3-13 12 3.4.3.1.1.2 Reset Procedure.3-14 13 3.4.3.1.1.2.1 Reset Procedure for the Initiating Side when it is a SAR 14 Transmitter .3-14 15 3.4.3.1.1.2.2 Reset Procedure for Initiating Side when it is a SAR 16 Recei
36、ver 3-14 17 3.4.3.1.1.2.3 Reset Procedure for the Responding Side when it is a SAR 18 Receiver 3-15 19 3.4.3.1.1.2.4 Reset Procedure for the Responding Side when it is a SAR 20 transmitter3-15 21 3.4.3.1.1.2.5 SAR Reset Message Flows 3-16 22 3.4.3.2 Data Transfer 3-16 23 3.4.3.2.1 SAR Transmit Proce
37、dures 3-16 24 3.4.3.2.2 SAR Receive Procedures.3-21 25 3.4.3.3 Message Formats.3-25 26 3.4.3.3.1 ResetTxIndication 3-25 27 3.4.3.3.2 ResetRxIndication3-26 28 3.4.3.3.3 ResetTxComplete .3-26 29 3.4.3.3.4 ResetRxComplete.3-26 30 3.4.3.3.5 ATReceiverStatus.3-27 31 3.4.3.3.6 ANReceiverStatus 3-31 32 3.4
38、.3.3.7 TransmitterStatus .3-33 33 3GPP2 C.S0084-003-0 v3.0 CONTENTS v 3.4.3.4 Interface to Other Protocols .3-34 1 3.4.3.4.1 Commands.3-34 2 3.4.3.4.2 Indications.3-34 3 3.4.4 Protocol Numeric Constants 3-34 4 3.5 Quick Nak Sub-Protocol 3-35 5 3.5.1 Overview3-35 6 3.5.2 Primitives and Public Data.3-
39、35 7 3.5.2.1 Commands 3-35 8 3.5.2.2 Return Indications.3-35 9 3.5.3 Procedures and Messages for the InUse Instance of the Sub-Protocol 3-35 10 3.5.3.1 Procedures.3-35 11 3.5.3.1.1 Initialization.3-35 12 3.5.3.1.2 Data Transfer.3-36 13 3.5.3.1.2.1 QN Transmit Procedures 3-36 14 3.5.3.1.2.2 QN Receiv
40、e Procedures.3-36 15 3.5.3.2 Message Formats .3-36 16 3.5.4 Interface to Other Protocols .3-36 17 3.5.4.1 Commands 3-36 18 3.5.4.2 Indications.3-36 19 3.5.5 RLP Packet Priorities .3-37 20 3.5.6 Protocol Numeric Constants 3-37 21 3.6 Configuration Attributes for the Basic Radio Link Protocol 3-37 22
41、3.6.1 Simple Attributes.3-37 23 3.6.2 Complex Attributes3-44 24 3.6.2.1 TimersFwd Attribute 3-44 25 3.6.2.2 TimersRev Attribute.3-45 26 3.6.2.3 ProtocolParametersFwd Attribute.3-45 27 3.6.2.4 ProtocolParametersRev Attribute3-46 28 3.7 Non-Attribute Data3-47 29 3.8 Session State Information3-47 30 4
42、BASIC STREAM PROTOCOL4-1 31 4.1 Overview4-1 32 3GPP2 C.S0084-003-0 v3.0 CONTENTS vi 4.2 Primitives and Public Data4-1 1 4.2.1 Commands4-1 2 4.2.2 Return Indications 4-1 3 4.2.3 Local Common Data4-1 4 4.2.4 Public Data .4-2 5 4.3 Protocol Data Unit.4-2 6 4.4 Procedures and Messages for the InConfigur
43、ation Instance of the Protocol4-2 7 4.4.1 Protocol Initialization for the InConfiguration Protocol Instance.4-2 8 4.4.2 Procedures 4-2 9 4.4.3 Message Formats 4-2 10 4.5 Procedures and Messages for the InUse Instance of the Protocol .4-2 11 4.5.1 Procedures 4-2 12 4.5.1.1 Protocol Initialization for
44、 the InUse Protocol Instance 4-3 13 4.5.1.2 Hard Commit Procedures 4-3 14 4.5.1.3 Soft Commit Procedures 4-3 15 4.5.2 Stream Header 4-3 16 4.5.3 Message Formats 4-3 17 4.6 Interface to Other Protocols.4-3 18 4.6.1 Commands4-3 19 4.6.2 Indications 4-3 20 4.7 Configuration Attributes for Basic Stream
45、Protocol .4-4 21 4.7.1 Simple Attributes 4-4 22 4.7.2 Complex Attributes .4-4 23 4.7.2.1 MaxStreams Attribute .4-4 24 4.8 Protocol Numeric Constants4-4 25 4.9 Non-Attribute Data .4-4 26 4.10 Session State Information .4-5 27 5 BASIC ROUTE PROTOCOL5-1 28 5.1 Overview .5-1 29 5.2 Primitives, Local Com
46、mon Data, and Public Data5-1 30 5.2.1 Commands5-1 31 5.2.2 Return Indications 5-1 32 3GPP2 C.S0084-003-0 v3.0 CONTENTS vii 5.2.3 Local Common Data 5-1 1 5.2.4 Public Data5-1 2 5.3 Protocol Data Unit.5-1 3 5.4 Procedures and Messages for the InConfiguration Instance of the Protocol5-3 4 5.4.1 Procedu
47、res 5-3 5 5.4.1.1 Protocol Initialization .5-3 6 5.4.2 Message Formats.5-3 7 5.5 Procedures and Messages for the InUse Instance of the Protocol .5-3 8 5.5.1 Procedures 5-3 9 5.5.1.1 Protocol Initialization .5-3 10 5.5.1.2 Hard Commit Procedures.5-3 11 5.5.1.3 Soft Commit Procedures 5-3 12 5.5.1.4 Ro
48、ute Protocol Header .5-3 13 5.5.1.5 Command Processing.5-8 14 5.5.1.6 Transmission Procedures.5-9 15 5.5.1.6.1 Access Terminal Procedure 5-9 16 5.5.1.6.2 Access Network Procedures5-10 17 5.5.1.7 Reception Procedures 5-12 18 5.5.1.7.1 Access Terminal Procedures.5-12 19 5.5.1.7.2 Access Network Proced
49、ures5-13 20 5.5.2 Message Formats.5-13 21 5.6 Interface to Other Protocols .5-14 22 5.6.1 Commands Sent 5-14 23 5.6.2 Indications 5-14 24 5.7 Configuration Attributes5-14 25 5.8 Non-Attribute Data5-14 26 5.9 Session State Information5-14 27 28 3GPP2 C.S0084-003-0 v3.0 CONTENTS viii No text.1 3GPP2 C.S0084-003-0 v3.0 FIGURES ix Figure 2-1. Reverse Link Reservation State Diagram (Access Terminal) 2-5 1 Figure 2-2. Forward Link Reservation State Diagram (Access Network) 2-6 2 Figure 3-1. Basic Radio Link Protocol Sub-Protocols 3-1 3 Figure 3-2. Relationship between Basic Radio Link Protocol a
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1