1、 TIA-1121.004-1-2009 APPROVED: MAY 1, 2009 REAFFIRMED: DECEMBER 2, 2013 TIA-1121.004-1 May 2009Application Layer for Ultra Mobile Broadband (UMB) Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandi
2、ngs between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect pre
3、clude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Public
4、ations are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purpo
5、rt to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trad
6、emarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. PN-3-0272.004-AD1-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document
7、will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights
8、(“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested
9、, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the partie
10、s involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Doc
11、ument contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandato
12、ry, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of
13、 voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Pate
14、nt(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPR
15、ESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DI
16、SCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR
17、 PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAM
18、AGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT
19、 OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-004-0 v3.0 CONTENTS i FOREWORD.xi 1 NOTES . xiii 2 REFERENCES xiii 3 1 Introduction1-1 4 2 Basic Signaling Protocol 2-1 5 2.1 General Overview 2-1 6 2.2 Primitives and Public
20、Data 2-1 7 2.2.1 Commands 2-1 8 2.2.2 Return Indications.2-1 9 2.2.3 Local Common Data 2-1 10 2.2.4 Public Data2-1 11 2.3 Protocol Data Unit.2-1 12 2.4 General Signaling Requirements2-2 13 2.4.1 General Requirements .2-2 14 2.4.2 Message Information2-2 15 2.5 Procedures and Messages for the InConfig
21、uration Instance of the Protocol2-3 16 2.5.1 Protocol Initialization for the InConfiguration Protocol Instance.2-3 17 2.5.2 Procedures 2-4 18 2.5.3 Message Formats.2-4 19 2.6 Procedures and Messages for the InUse Instance of the Protocol .2-4 20 2.6.1 Protocol Initialization for the InUse Protocol I
22、nstance 2-4 21 2.6.2 Hard Commit Procedures.2-4 22 2.6.3 Soft Commit Procedures 2-4 23 2.6.4 Procedures 2-4 24 2.6.5 Type Definitions.2-4 25 2.6.6 Messages.2-5 26 2.6.7 BSP Header .2-5 27 2.7 Interface to Other Protocols .2-5 28 2.7.1 Commands 2-5 29 2.7.2 Indications 2-5 30 2.8 Configuration Attrib
23、utes2-5 31 3GPP2 C.S0084-004-0 v3.0 CONTENTS ii 2.9 Non-Attribute Data .2-5 1 2.10 Session State Information .2-5 2 3 Basic Inter-Route Tunneling Protocol3-1 3 3.1 Overview .3-1 4 3.2 Primitives, Local Common Data, and Public Data3-2 5 3.2.1 Commands3-2 6 3.2.2 Return Indications 3-2 7 3.2.3 Local C
24、ommon Data3-2 8 3.2.4 Public Data .3-2 9 3.3 Protocol Data Unit.3-2 10 3.4 Procedures and Messages for the InConfiguration Instance of the Protocol3-3 11 3.4.1 Procedures 3-3 12 3.4.1.1 Protocol Initialization.3-3 13 3.4.2 Message Formats 3-3 14 3.5 Procedures and Messages for the InUse Instance of
25、the Protocol .3-3 15 3.5.1 Procedures 3-3 16 3.5.1.1 Protocol Initialization.3-3 17 3.5.1.2 Hard Commit Procedures 3-3 18 3.5.1.3 Soft Commit Procedures 3-4 19 3.5.1.4 Inter-Route Tunneling Protocol Header3-4 20 3.5.1.5 Command Processing 3-6 21 3.5.1.5.1 Activate .3-6 22 3.5.1.5.2 Deactivate3-6 23
26、3.5.1.6 Inter-Route Tunneling Protocol Stream Mapping Procedures .3-6 24 3.5.1.7 Transmission Procedures 3-6 25 3.5.1.7.1 Access Terminal Procedure 3-6 26 3.5.1.7.2 Access Network Procedures .3-7 27 3.5.1.8 Reception Procedures 3-7 28 3.5.1.8.1 Access Terminal Procedures 3-7 29 3.5.1.8.2 Access Netw
27、ork Procedures .3-8 30 3.5.2 Type Definitions 3-8 31 3.5.3 Message Formats 3-8 32 3GPP2 C.S0084-004-0 v3.0 CONTENTS iii 3.6 Interface to Other Protocols .3-9 1 3.6.1 Commands Sent 3-9 2 3.6.2 Indications 3-9 3 3.7 Configuration Attributes3-9 4 3.7.1 Simple Attributes.3-9 5 3.7.2 Complex Attributes3-
28、9 6 3.8 Non-Attribute Data3-9 7 3.9 Session State Information3-9 8 4 Basic ROHC Support Protocol .4-1 9 4.1 Overview4-1 10 4.2 Primitives, Local Common Data, and Public Data4-1 11 4.2.1 Commands 4-1 12 4.2.2 Return Indications.4-1 13 4.2.3 Local Common Data 4-1 14 4.2.4 Public Data4-1 15 4.3 Protoco
29、l Data Unit.4-1 16 4.4 Protocol Initialization.4-1 17 4.5 Procedures and Messages for the InConfiguration Instance of the Protocol4-1 18 4.5.1 Protocol Initialization for the InConfiguration Protocol Instance.4-1 19 4.5.2 Procedures 4-1 20 4.5.3 Message Formats.4-1 21 4.6 Procedures and Messages for
30、 the InUse Instance of the Protocol .4-2 22 4.6.1 Procedures 4-2 23 4.6.1.1 Protocol Initialization for the InUse Protocol Instance.4-2 24 4.6.1.2 Hard Commit Procedures.4-2 25 4.6.1.3 Soft Commit Procedures 4-2 26 4.6.1.4 ROHC Support Protocol Header .4-2 27 4.6.1.5 Command Processing.4-2 28 4.6.1.
31、6 Common Procedures4-2 29 4.6.1.6.1 Use of Multiple ROHC Versions4-2 30 4.6.2 Type Definitions.4-2 31 4.6.3 Message Formats.4-3 32 3GPP2 C.S0084-004-0 v3.0 CONTENTS iv 4.7 Interface to Other Protocols.4-3 1 4.7.1 Commands Sent4-3 2 4.7.2 Indications 4-3 3 4.8 Configuration Attributes .4-3 4 4.8.1 Si
32、mple Attributes 4-3 5 4.8.2 Complex Attributes .4-3 6 4.8.2.1 ROHCParametersFwd Attribute .4-3 7 4.8.2.2 ROHCParametersRev Attribute 4-4 8 4.9 Non-Attribute Data .4-6 9 4.10 Session State Information .4-6 10 5 Basic EAP Support Protocol 5-1 11 5.1 Overview .5-1 12 5.2 Primitives, Local Common Data,
33、and Public Data5-1 13 5.2.1 Commands5-1 14 5.2.2 Return Indications 5-1 15 5.2.3 Local Common Data5-1 16 5.2.4 Public Data .5-1 17 5.3 Protocol Data Unit.5-1 18 5.4 Protocol Initialization 5-1 19 5.5 Procedures and Messages for the InConfiguration Instance of the Protocol5-1 20 5.5.1 Protocol Initia
34、lization for the InConfiguration Protocol Instance.5-1 21 5.5.2 Procedures 5-1 22 5.5.3 Message Formats 5-2 23 5.6 Procedures and Messages for the InUse Instance of the Protocol .5-2 24 5.6.1 Procedures 5-2 25 5.6.1.1 Protocol Initialization for the InUse Protocol Instance 5-2 26 5.6.1.2 Hard Commit
35、 Procedures 5-2 27 5.6.1.3 Soft Commit Procedures 5-2 28 5.6.1.4 EAP Support Protocol Header 5-2 29 5.6.1.5 Command Processing 5-2 30 5.6.1.6 Common Procedures .5-2 31 5.6.1.7 Access Terminal Procedures 5-2 32 3GPP2 C.S0084-004-0 v3.0 CONTENTS v 5.6.1.8 Access Network Procedures5-3 1 5.6.2 Type Defi
36、nitions.5-3 2 5.6.3 Message Formats.5-3 3 5.6.3.1 InitiateEAPFastReauthentication .5-3 4 5.6.3.2 InitiateEAP.5-3 5 5.7 Interface to Other Protocols .5-4 6 5.7.1 Commands Sent 5-4 7 5.7.2 Indications 5-4 8 5.8 Configuration Attributes5-4 9 5.8.1 Simple Attributes.5-4 10 5.8.2 Complex Attributes5-4 11
37、 5.9 Non-Attribute Data5-4 12 5.10 Session State Information5-4 13 14 3GPP2 C.S0084-004-0 v3.0 CONTENTS vi No text.1 3GPP2 C.S0084-004-0 v3.0 FIGURES vii Figure 2-1. BSP Packet Structure.2-2 1 Figure 2-2. Sample Message Information2-3 2 Figure 3-1. Data Path for Normal and Tunneled Packets 3-1 3 Fig
38、ure 3-2. Example Inter-Route Tunneling Protocol Headers 3-2 4 Figure 3-3. Inter-Route Tunneling Protocol Packet .3-3 5 6 3GPP2 C.S0084-004-0 v3.0 FIGURES viii No text.1 3GPP2 C.S0084-004-0 v3.0 TABLES ix Table 3-1. HeaderType Values3-4 1 Table 3-2. SpecialRouteID Values.3-6 2 Table 3-3. Configurable
39、 Values.3-9 3 Table 5-1. Configurable Values.5-4 4 5 3GPP2 C.S0084-004-0 v3.0 TABLES x No text. 1 3GPP2 C.S0084-004-0 v3.0 FOREWORD xi (This foreword is not part of this Standard) 1 This Standard was prepared by Technical Specification Group C of the Third Generation 2 Partnership Project 2 (3GPP2).
40、 This Standard is the Application Layer part of the Ultra 3 Mobile Broadband (UMB)1air interface. Other parts of this Standard are: 4 Overview for Ultra Mobile Broadband (UMB) Air Interface Specification 5 Physical Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 6 MAC Layer for Ul
41、tra Mobile Broadband (UMB) Air Interface Specification 7 Radio Link Layer for Ultra Mobile Broadband (UMB) Air Interface Specification 8 Security Functions for Ultra Mobile Broadband (UMB) Air Interface Specification 9 Connection Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specifica
42、tion 10 Session Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification 11 Route Control Plane for Ultra Mobile Broadband (UMB) Air Interface Specification 12 Broadcast-Multicast Upper Layers for Ultra Mobile Broadband (UMB) Air Interface 13 Specification 14 Other Standards may be
43、 required to implement this system and are listed in the References 15 section of each part. 16 This standard provides a specification for land mobile wireless systems based upon cellular 17 principles. This Standard is one part of the IMT-2000 CDMA Multi-Carrier, IMT-2000 18 CDMA MC, also known as
44、cdma20002. 19 1Ultra Mobile Broadband and (UMB) are trade and service marks owned by the CDMA Development Group (CDG). 2cdma2000is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date o
45、f publication), cdma2000is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. 3GPP2 C.S0084-004-0 v3.0 FOREWORD xii No text. 1 3GPP2 C.S0084-004-0 v3.0 REFERENCES xiii The following documents contain provisions, which, through reference in this text
46、, 1 constitute provisions of this document. References are either specific (identified by date of 2 publication, edition number, version number, etc.) or non-specific. For a specific reference, 3 subsequent revisions do not apply. For a non-specific reference, the latest version applies. 4 In the ca
47、se of a reference to a 3GPP2 document, a non-specific reference implicitly refers to 5 the latest version of that document in the same Release as the present document. 6 7 1 C.S0084-000-0, Overview for Ultra Mobile Broadband (UMB) Air Interface 8 Specification. 9 2 C.S0084-001-0, Physical Layer for
48、Ultra Mobile Broadband (UMB) Air Interface 10 Specification. 11 3 C.S0084-002-0, MAC Layer for Ultra Mobile Broadband (UMB) Air Interface 12 Specification. 13 4 C.S0084-003-0, Radio Link Layer for Ultra Mobile Broadband (UMB) Air Interface 14 Specification. 15 5 Reserved. 16 6 C.S0084-005-0, Securit
49、y Functions for Ultra Mobile Broadband (UMB) Air Interface 17 Specification. 18 7 C.S0084-006-0, Connection Control Plane for Ultra Mobile Broadband (UMB) Air 19 Interface Specification. 20 8 C.S0084-007-0, Session Control Plane for Ultra Mobile Broadband (UMB) Air 21 Interface Specification. 22 9 C.S0084-008-0, Route Control Plane for Ultra Mobile Broadband (UMB) Air 23 Interface Specification. 24 10 C.S0084-009-0, Broadcast-Multicast Upper Layer for Ultra Mobile Broadband 25 (UMB) Air Interface Specification. 26 11 C.R1001, Administration of
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1