TIA-1164-1-2011 WiMAX-HRPD Interworking Core Network Aspects《Wimax-HRPD互通 核心网络方面》.pdf

1、 TIA-1164-1 September 2011WiMAX-HRPD Interworking: Core Network Aspects NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products,

2、 and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such St

3、andards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent p

4、olicy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. I

5、t is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0354-AD1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that

6、the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual pro

7、perty rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof

8、 is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left

9、to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its content

10、s. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consis

11、ts of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of enc

12、ouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of E

13、ssential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WAR

14、RANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA

15、 EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN TH

16、E DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (

17、INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAM

18、ENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. REVISION HISTORY Revision Description of Changes Date Rev 0 v1.0 Initial publication January 2009 Rev 0, v2.0 Point release June 2010 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10

19、11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 i WiMAX-HRPD Interworking: Core Network Aspects CONTENTS 1 Introduction1 1.1 Feature Descriptions 1 1.1.1 Active handoff from WiMAX to HRPD for a sing

20、le transmitter MS/AT .1 1.1.2 Active handoff from HRPD to WiMAX for a single transmitter MS/AT .2 1.1.3 Idle Session handoff from WiMAX to HRPD for a single transmitter MS/AT.2 1.1.4 Idle Session handoff from HRPD to WiMAX for a single transmitter MS/AT.2 1.1.5 CMIPv4 on the WiMAX network .2 1.1.6 P

21、MIPv4 on the WiMAX network2 1.1.7 PMIPv6 on the WiMAX network2 1.1.8 CMIPv4 on the HRPD network.3 1.1.9 PMIPv4 on the HPRD network .3 1.1.10 PMIPv6 on the HPRD network .3 1.2 Assumptions.3 2 References4 2.1 Normative References4 2.2 Informative References5 3 Definitions, Abbreviations and Acronyms.6

22、 3.1 Definitions .6 3.1.1 Abbreviations and Acronyms 6 4 Interworking Architecture for WiMAX-HRPD Handoff .8 4.1 Network Entities 9 4.1.1 MS/AT.9 4.1.2 WiMAX ASN9 4.1.3 WiMAX CSN and 3GPP2 Core Network9 4.1.4 HRPD RAN.10 4.2 Interfaces10 4.2.1 A10/A11 HRPD AN/PCF - PDSN.10 4.2.2 A23: HRPD SFF AN 10

23、4.2.3 Ty: PDSN PCRF.10 4.2.4 X1: MS/AT HRPD SFF11 4.2.5 X2: MS/AT WiMAX SFF 11 4.2.6 X3: PDSN LMA/HA 11 5 Functional Requirements12 5.1 Functions of the SFF12 5.2 Tunnel Establishment over X1 Interface12 5.2.1 SFF Discovery.12 5.2.2 IKEv2/IPsec Establishment .15 5.3 CMIPv4-Based Approach for WiMAX-t

24、o-HRPD Handoff.23 5.3.1 MS/AT Requirements23 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ii 5.3.2 PDSN Requirements23 5.3.3 WiMAX ASN Gateway Requiremen

25、ts24 5.3.4 HA Requirements 24 5.3.5 AAA Requirements .24 5.3.6 PCRF Requirements 24 5.4 CMIPv4/PMIPv4-Based Approach for WiMAX to HRPD Handoff .24 5.4.1 MS/AT Requirements24 5.4.2 PDSN Requirements25 5.4.3 WiMAX ASN Gateway Requirements25 5.4.4 HA Requirements 25 5.4.5 AAA Requirements .25 5.4.6 PCR

26、F Requirements 26 5.5 PMIP-Based Approach for WiMAX-to-HRPD Handoff .26 5.5.1 PMIPv4-Based Approach 26 5.5.2 PMIPv6-Based Approach 28 5.6 HRPD-to-WiMAX Handoff Approach 30 5.6.1 MS/AT Requirements30 5.6.2 PDSN Requirements30 5.6.3 WiMAX ASN Gateway Requirements31 5.6.4 LMA/HA Requirements 31 5.6.5 A

27、AA Requirements .31 5.6.6 PCRF Requirements 31 6 Call Flows 32 6.1 SFF Discovery Call Flow.32 6.2 IPsec Tunnel Establishment .32 6.3 CMIPv4/CMIPv4-Based Approach Call Flow.34 6.3.1 Active Handoff from WiMAX to HRPD.34 6.3.2 WiMAX to HRPD Dormant Handoff using CMIPv4 in WiMAX Network and HRPD Network

28、41 6.4 CMIPv4/PMIPv4-Based Approach Call Flow.43 6.4.1 Active Handoff from WiMAX to HRPD.43 6.4.2 WiMAX to HRPD Dormant Handoff using PMIPv4 in WiMAX Network and CMIPv4 in HRPD Network.49 6.5 PMIP-Based Approach Call Flow51 6.5.1 PMIPv4-Based Call Flows for Active Handoff to HRPD AN.51 6.5.2 PMIPv6-

29、Based Call Flow for Active Handoff to HRPD AN that uses IPv6 .56 6.5.3 Call Flow for handoff back to HRPD 58 6.5.4 WiMAX to HRPD Idle Handoff using PMIP 59 6.6 Non Optimized Handoff.61 6.6.1 WiMAX to HRPD Mobility through WiMAX Idle State using OMIPv4 in WiMAX and CMIPv4 in HRPD61 7 X1 Interface64 7

30、.1 X1 Interface Protocol Stacks64 7.1.1 IKEv2 Protocol Stack for the X1 Interface64 7.1.2 HRPD Protocol Stack over the X1 Interface .64 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

31、 52 53 54 55 56 57 58 59 60 iii 7.2 X1 Protocol Definition.65 7.2.1 X1 Protocol Header .65 7.2.2 X1 Protocol Control Messages 66 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

32、54 55 56 57 58 59 60 iv LIST OF FIGURES Figure 1 WiMAX-HRPD Interworking Architecture (WiMAX-to-HRPD Handoff) .8 Figure 2 WiMAX-HRPD Interworking Architecture (HRPD-to-WiMAX Handoff) .8 Figure 3 SFF Discovery 32 Figure 4 IPsec Tunnel Establishment33 Figure 5 CMIPv4-CMIPv4-based WiMAX to HRPD handoff

33、 through HRPD RAN.35 Figure 6 CMIPv4-based WiMAX to HRPD handoff through HRPD RAN-Lite supporting A13-interface 39 Figure 7 WiMAX to HRPD Dormant Handoff using CMIPv4 in the HRPD Network.42 Figure 8 PMIPv4-CMIPv4-based WiMAX to HRPD handoff through HRPD RAN .44 Figure 9 PMIPv4-CMIPv4-based WiMAX to

34、HRPD handoff through HRPD RAN-Lite supporting A13-interface 47 Figure 10 WiMAX to HRPD Dormant Handoff using PMIPv4 in WiMAX Network and CMIPv4 in the HRPD Network 50 Figure 11 PMIPv4-based WiMAX-to HRPD handoff through HRPD AN.52 Figure 12 PMIPv4-based WiMAX to HRPD handoff through HRPD RAN-Lite su

35、pporting A13-interface 54 Figure 13 PMIPv6-based WiMAX-to HRPD handoff through HRPD AN.56 Figure 14 Call Flow for handoff back to HRPD .58 Figure 15 WiMAX to HRPD Dormant Handoff using PMIP .60 Figure 16 WiMAX to HRPD Mobility through WiMAX idle state using PMIPv4 in WiMAX and CMIPv4 in HRPD 62 Figu

36、re 17 IKEv2 Protocol Stack for the X1 Interface.64 Figure 18 Layer 3 Tunnel protocol stacks showing the X1 interface carrying HRPD signaling messages. 65 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

37、 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 v LIST OF TABLES Table 1 WiMAX-HRPD-SFF-Request /Answer commands .17 Table 2 Meaning of the fields20 Table 3 Diameter AVP exchanged between the HRPD SFF and the AAA .20 Table 4 Meaning of the Request, Accept, Reject, Challenge columns of Table 5.21 Table

38、 5 Radius AVP exchanged between the HRPD SFF and the AAA.22 Table 6 X1 Protocol Header 65 Table 7 MS/AT Identifier Type Value.66 Table 8 Target Node Identifier Type Value.66 Table 9 Control Message Types 66 Table 10 Error Notification Message.66 Table 11 Error Cause Values.67 3GPP2 X.S0058-0 v2.0 1

39、2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 vi FOREWORD The Foreword is informative. This document was prepared by 3GPP2 TSG-X. The document is updated with IANA assigned port

40、 numbers. Also a new section to cover non-optimized handoff is added to the document. This document uses the following conventions: “Shall” and “shall not” identify requirements to be followed strictly to conform to this document and from which no deviation is permitted. “Should” and “should not” in

41、dicate that one of several possibilities is recommended as particularly suitable, without mentioning or excluding others, that a certain course of action is preferred but not necessarily required, or that (in the negative form) a certain possibility or course of action is discouraged but not prohibi

42、ted. “May” and “need not” indicate a course of action permissible within the limits of the document. “Can” and “cannot” are used for statements of possibility and capability, whether material, physical or causal. 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

43、26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 vii SCOPE This document defines a method of interworking between WiMAX and HRPD systems. 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 3

44、2 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 viii (This page intentionally left blank) 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 5

45、4 55 56 57 58 59 60 1 1 Introduction This document defines the core network aspects of interworking between Worldwide Interoperability for Microwave Access (WiMAXTM 1) and High Rate Packet Data (HRPD) systems using an Mobile Station/Access Terminal (MS/AT) having a single transmitter. For an MS/AT h

46、aving a dual transmitter, refer to WiMAX 1.5 28. 1.1 Feature Descriptions This specification explicitly supports the following features: 1. Active handoff from WiMAX to HRPD for a single transmitter MS/AT. 2. Active handoff from HRPD to WiMAX for a single transmitter MS/AT. 3. Idle state handoff fro

47、m WiMAX to HRPD for a single transmitter MS/AT. 4. Idle state handoff from HRPD to WiMAX for a single transmitter MS/AT. 5. Client Mobile Internet Protocol version 4 (CMIPv4) on the WiMAX network. 6. Proxy Mobile Internet Protocol version 4 (PMIPv4) on the WiMAX network. 7. PMIPv6 on the WiMAX netwo

48、rk. 8. CMIPv4 on the HRPD network. 9. PMIPv4 on the HPRD network. 10. PMIPv6 on the HPRD network. 1.1.1 Active handoff from WiMAX to HRPD for a single transmitter MS/AT This feature supports the ability for an MS/AT operating with one active transmitter and one or more receivers to be seamlessly han

49、ded off from the WiMAX network to the HRPD network while the MS/AT is engaged in one or more active sessions. For this feature, roaming scenarios are not specified. The requirements for this feature are specified in this document. 1“WiMAX Forum,” the WiMAX Forum logo and the WiMAX Forum Certified logo are registered trademarks of the WiMAX Forum. “WiMAX,” “Mobile WiMAX,” “Fixed WiMAX,” “WiMAX Certified,” and “WiMAX Forum Certified” are trademarks of the WiMAX Forum. 3GPP2 X.S0058-0 v2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30